#include-once #include #include "SecurityEx.au3" ; #INDEX# ========================================================================================================================================================== ; Title .........: Services ; AutoIt Version : 3.3.8.0++ ; Language ......: English ; Description ...: Windows service management for AutoIt. ; ================================================================================================================================================================== ; #CURRENT# ======================================================================================================================================================== ;_Service_Change ;_Service_Create ;_Service_Delete ;_Service_Enum ;_Service_EnumDependent ;_Service_Exists ;_Service_Pause ;_Service_Resume ;_Service_QueryAccount ;_Service_QueryBinaryPath ;_Service_QueryConfig ;_Service_QueryDependencies ;_Service_QueryDesc ;_Service_QueryDisplayName ;_Service_QueryErrorControl ;_Service_QueryFailureActions ;_Service_QueryGroup ;_Service_QueryStartType ;_Service_QueryStatus ;_Service_QueryType ;_Service_SetAccount ;_Service_SetBinaryPath ;_Service_SetDependencies ;_Service_SetDesc ;_Service_SetDisplayName ;_Service_SetErrorControl ;_Service_SetFailureActions ;_Service_SetGroup ;_Service_SetStartType ;_Service_SetType ;_Service_Start ;_Service_Stop ; ================================================================================================================================================================== ; #INTERNAL_USE_ONLY#=============================================================================================================================================== ;ChangeServiceConfig ;CloseServiceHandle ;ControlService ;GetLastError ;OpenSCManager ;OpenService ;QueryServiceConfig ; ================================================================================================================================================================== ; Access rights for the Service Control Manager Global Const $SC_MANAGER_CONNECT = 0x0001 Global Const $SC_MANAGER_CREATE_SERVICE = 0x0002 Global Const $SC_MANAGER_ENUMERATE_SERVICE = 0x0004 Global Const $SC_MANAGER_LOCK = 0x0008 Global Const $SC_MANAGER_QUERY_LOCK_STATUS = 0x0010 Global Const $SC_MANAGER_MODIFY_BOOT_CONFIG = 0x0020 Global Const $SC_MANAGER_ALL_ACCESS = BitOR( $STANDARD_RIGHTS_REQUIRED, _ $SC_MANAGER_CONNECT, _ $SC_MANAGER_CREATE_SERVICE, _ $SC_MANAGER_ENUMERATE_SERVICE, _ $SC_MANAGER_LOCK, _ $SC_MANAGER_QUERY_LOCK_STATUS, _ $SC_MANAGER_MODIFY_BOOT_CONFIG ) ; Access rights for a service Global Const $SERVICE_QUERY_CONFIG = 0x0001 Global Const $SERVICE_CHANGE_CONFIG = 0x0002 Global Const $SERVICE_QUERY_STATUS = 0x0004 Global Const $SERVICE_ENUMERATE_DEPENDENTS = 0x0008 Global Const $SERVICE_START = 0x0010 Global Const $SERVICE_STOP = 0x0020 Global Const $SERVICE_PAUSE_CONTINUE = 0x0040 Global Const $SERVICE_INTERROGATE = 0x0080 Global Const $SERVICE_USER_DEFINED_CONTROL = 0x0100 Global Const $SERVICE_ALL_ACCESS = BitOR( $STANDARD_RIGHTS_REQUIRED, _ $SERVICE_QUERY_CONFIG, _ $SERVICE_CHANGE_CONFIG, _ $SERVICE_QUERY_STATUS, _ $SERVICE_ENUMERATE_DEPENDENTS, _ $SERVICE_START, _ $SERVICE_STOP, _ $SERVICE_PAUSE_CONTINUE, _ $SERVICE_INTERROGATE, _ $SERVICE_USER_DEFINED_CONTROL ) ; Service controls Global Const $SERVICE_CONTROL_STOP = 0x00000001 Global Const $SERVICE_CONTROL_PAUSE = 0x00000002 Global Const $SERVICE_CONTROL_CONTINUE = 0x00000003 Global Const $SERVICE_CONTROL_INTERROGATE = 0x00000004 Global Const $SERVICE_CONTROL_SHUTDOWN = 0x00000005 Global Const $SERVICE_CONTROL_PARAMCHANGE = 0x00000006 Global Const $SERVICE_CONTROL_NETBINDADD = 0x00000007 Global Const $SERVICE_CONTROL_NETBINDREMOVE = 0x00000008 Global Const $SERVICE_CONTROL_NETBINDENABLE = 0x00000009 Global Const $SERVICE_CONTROL_NETBINDDISABLE = 0x0000000A Global Const $SERVICE_CONTROL_DEVICEEVENT = 0x0000000B Global Const $SERVICE_CONTROL_HARDWAREPROFILECHANGE = 0x0000000C Global Const $SERVICE_CONTROL_POWEREVENT = 0x0000000D Global Const $SERVICE_CONTROL_SESSIONCHANGE = 0x0000000E ; Service config Global Const $SERVICE_NO_CHANGE = -1 Global Const $SERVICE_CONFIG_DESCRIPTION = 1 Global Const $SERVICE_CONFIG_FAILURE_ACTIONS = 2 ; Service types Global Const $SERVICE_KERNEL_DRIVER = 0x00000001 Global Const $SERVICE_FILE_SYSTEM_DRIVER = 0x00000002 Global Const $SERVICE_ADAPTER = 0x00000004 Global Const $SERVICE_RECOGNIZER_DRIVER = 0x00000008 Global Const $SERVICE_DRIVER = BitOR( $SERVICE_KERNEL_DRIVER, _ $SERVICE_FILE_SYSTEM_DRIVER, _ $SERVICE_RECOGNIZER_DRIVER ) Global Const $SERVICE_WIN32_OWN_PROCESS = 0x00000010 Global Const $SERVICE_WIN32_SHARE_PROCESS = 0x00000020 Global Const $SERVICE_WIN32 = BitOR( $SERVICE_WIN32_OWN_PROCESS, _ $SERVICE_WIN32_SHARE_PROCESS ) Global Const $SERVICE_INTERACTIVE_PROCESS = 0x00000100 Global Const $SERVICE_TYPE_ALL = BitOR( $SERVICE_WIN32, _ $SERVICE_ADAPTER, _ $SERVICE_DRIVER, _ $SERVICE_INTERACTIVE_PROCESS ) ; Service start types Global Const $SERVICE_BOOT_START = 0x00000000 Global Const $SERVICE_SYSTEM_START = 0x00000001 Global Const $SERVICE_AUTO_START = 0x00000002 Global Const $SERVICE_DEMAND_START = 0x00000003 Global Const $SERVICE_DISABLED = 0x00000004 ; Service error control Global Const $SERVICE_ERROR_IGNORE = 0x00000000 Global Const $SERVICE_ERROR_NORMAL = 0x00000001 Global Const $SERVICE_ERROR_SEVERE = 0x00000002 Global Const $SERVICE_ERROR_CRITICAL = 0x00000003 ; Service state Global Const $SERVICE_STOPPED = 0x00000001 Global Const $SERVICE_START_PENDING = 0x00000002 Global Const $SERVICE_STOP_PENDING = 0x00000003 Global Const $SERVICE_RUNNING = 0x00000004 Global Const $SERVICE_CONTINUE_PENDING = 0x00000005 Global Const $SERVICE_PAUSE_PENDING = 0x00000006 Global Const $SERVICE_PAUSED = 0x00000007 ; Service accept control codes Global Const $SERVICE_ACCEPT_STOP = 0x00000001 Global Const $SERVICE_ACCEPT_PAUSE_CONTINUE = 0x00000002 Global Const $SERVICE_ACCEPT_SHUTDOWN = 0x00000004 Global Const $SERVICE_ACCEPT_PARAMCHANGE = 0x00000008 Global Const $SERVICE_ACCEPT_NETBINDCHANGE = 0x00000010 Global Const $SERVICE_ACCEPT_HARDWAREPROFILECHANGE = 0x00000020 Global Const $SERVICE_ACCEPT_POWEREVENT = 0x00000040 Global Const $SERVICE_ACCEPT_SESSIONCHANGE = 0x00000080 Global Const $SERVICE_ACCEPT_PRESHUTDOWN = 0x00000100 ; Service enumerate Global Const $SERVICE_ACTIVE = 0x00000001 Global Const $SERVICE_INACTIVE = 0x00000002 Global Const $SERVICE_STATE_ALL = BitOR( $SERVICE_ACTIVE, _ $SERVICE_INACTIVE ) ; Service info Global Const $SC_STATUS_PROCESS_INFO = 0 Global Const $SC_ENUM_PROCESS_INFO = 0 ; Service specific system error codes Global Const $ERROR_SERVICE_DISABLED = 1058 Global Const $ERROR_SERVICE_SPECIFIC_ERROR = 1066 Global Const $ERROR_SERVICE_DEPENDENCY_FAIL = 1068 Global Const $ERROR_SERVICE_NEVER_STARTED = 1077 Global Const $NO_ERROR = 0 ; SC_ACTION_TYPE enumeration type Global Enum $SC_ACTION_NONE, $SC_ACTION_RESTART, $SC_ACTION_REBOOT, $SC_ACTION_RUN_COMMAND Global Const $SERVICE_RUNS_IN_SYSTEM_PROCESS = 0x00000001 ; #FUNCTION# ======================================================================================================================================================= ; Name...........: _Service_Change ; Description ...: Changes an existing service's configuration. ; Syntax.........: _Service_Change($sServiceName, $iServiceType _ ; [, $iStartType, $iErrorControl, $sBinaryPath, $sLoadOrderGroup, $fTagId, $vDependencies, $sServiceUser, $sPassword, $sDisplayName, $sComputerName]) ; Parameters ....: $sServiceName - Name of the service. ; $iServiceType - The type of service. Specify $SERVICE_NO_CHANGE if you are not changing the existing service type; ; otherwise, specify one of the following service types: ; $SERVICE_KERNEL_DRIVER - Driver service. ; $SERVICE_FILE_SYSTEM_DRIVER - File system driver service. ; $SERVICE_WIN32_OWN_PROCESS - Service that runs in its own process. ; $SERVICE_WIN32_SHARE_PROCESS - Service that shares a process with other services. ; If you specify either $SERVICE_WIN32_OWN_PROCESS or $SERVICE_WIN32_SHARE_PROCESS, ; and the service is running in the context of the LocalSystem account, you can also specify the following type: ; $SERVICE_INTERACTIVE_PROCESS - The service can interact with the desktop. ; $iStartType - [Optional] The service start options. Specify $SERVICE_NO_CHANGE if you are not changing the existing start type; ; otherwise, specify one of the following start types: ; $SERVICE_BOOT_START - A device driver started by the system loader. This value is valid only for driver services. ; $SERVICE_SYSTEM_START - A device driver started by the IoInitSystem function. This value is valid only for driver services. ; $SERVICE_AUTO_START - A service started automatically by the service control manager during system startup. ; $SERVICE_DEMAND_START - A service started by the service control manager when a process calls the StartService function. ; $SERVICE_DISABLED - A service that cannot be started. ; $iErrorControl - [Optional] The severity of the error, and action taken, if this service fails to start. ; Specify $SERVICE_NO_CHANGE if you are not changing the existing error control; otherwise, specify one of the following values: ; $SERVICE_ERROR_IGNORE - The startup program ignores the error and continues the startup operation. ; $SERVICE_ERROR_NORMAL - The startup program logs the error in the event log but continues the startup operation. ; $SERVICE_ERROR_SEVERE - The startup program logs the error in the event log. ; If the last-known-good configuration is being started, the startup operation continues. ; Otherwise, the system is restarted with the last-known-good configuration. ; $SERVICE_ERROR_CRITICAL - The startup program logs the error in the event log, if possible. ; If the last-known-good configuration is being started, the startup operation fails. ; Otherwise, the system is restarted with the last-known good configuration. ; $sBinaryPath - [Optional] The fully-qualified path to the service binary file. Specify "Default" if you are not changing the existing path. ; If the path contains a space, it must be quoted so that it is correctly interpreted. ; For example, "d:\\my share\\myservice.exe" should be specified as "\"d:\\my share\\myservice.exe\"". ; The path can also include arguments for an auto-start service. For example, "d:\\myshare\\myservice.exe arg1 arg2". ; These arguments are passed to the service entry point (typically the main function). ; $sLoadOrderGroup - [Optional] The name of the load ordering group of which this service is a member. ; Specify "Default" if you are not changing the existing load ordering group. ; Specify an empty string if the service does not belong to a group. ; $fTagId - [Optional] Specify "True" if you desire a tag value that is unique in the group specified in the $sLoadOrderGroup parameter. ; Specify "False" or "Default" if you are not changing the existing tag. ; The tag value is stored in @extended macro. ; You can use a tag for ordering service startup within a load ordering group by specifying a tag order vector in the ; GroupOrderList value of the following registry key: ; HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control ; Tags are only evaluated for driver services that have $SERVICE_BOOT_START or $SERVICE_SYSTEM_START start types. ; $vDependencies - [Optional] An array of services or load ordering groups that the system must start before this service can be started. ; (Dependency on a group means that this service can run if at least one member of the group is running after an attempt to ; start all members of the group.) Specify an empty string if the service has no dependencies. ; You must prefix group names with a plus sign ("+") so that they can be distinguished from a service name, ; because services and service groups share the same name space. ; Specify "Default" if you are not changing the existing dependencies. ; $sServiceUser - [Optional] The name of the account under which the service should run. ; Specify "Default" if you are not changing the existing account name. ; If the service type is $SERVICE_WIN32_OWN_PROCESS, use an account name in the form DomainName\UserName. ; The service process will be logged on as this user. If the account belongs to the built-in domain, ; you can specify .\UserName . A shared process can run as any user. ; If the service type is $SERVICE_KERNEL_DRIVER or $SERVICE_FILE_SYSTEM_DRIVER, ; the name is the driver object name that the system uses to load the device driver. ; $sPassword - [Optional] The password to the account name specified by the $sServiceUser parameter. ; Specify "Default" if you are not changing the existing password. ; Specify an empty string if the account has no password or if the service runs in the LocalService, NetworkService, ; or LocalSystem account. Passwords are ignored for driver services. ; $sDisplayName - [Optional] The display name to be used by applications to identify the service for its users. ; Specify "Default" if you are not changing the existing display name; otherwise, ; this string has a maximum length of 256 characters. The name is case-preserved in the service control manager. ; Display name comparisons are always case-insensitive. ; $sComputerName - [Optional] The name of the target computer. The local computer is default. ; Requirement(s).: Administrative rights on the target computer. ; Return values .: Success - 1 ; Failure - 0 ; Sets @error ; Author ........: engine ; Modified.......: ; Remarks .......: ; Related .......: ; Link ..........: ; Example .......: ; ================================================================================================================================================================== Func _Service_Change( $sServiceName, _ $iServiceType, _ $iStartType = $SERVICE_NO_CHANGE, _ $iErrorControl = $SERVICE_NO_CHANGE, _ $sBinaryPath = Default, _ $sLoadOrderGroup = Default, _ $fTagId = Default, _ $vDependencies = Default, _ $sServiceUser = Default, _ $sPassword = Default, _ $sDisplayName = Default, _ $sComputerName = "" ) Local $tBinaryPath, $tLoadOrderGroup, $tTagId, $tDepend, $tServiceUser, $tPassword, $tDisplayName, $hSC, $hService, $iSCh, $iSChE $tBinaryPath = DllStructCreate("char[" & Number($sBinaryPath <> Default) * ( StringLen($sBinaryPath) + 1 ) & "]") DllStructSetData($tBinaryPath, 1, $sBinaryPath) $tLoadOrderGroup = DllStructCreate("char[" & Number($sLoadOrderGroup <> Default) * ( StringLen($sLoadOrderGroup) + 1 ) & "]") DllStructSetData($tLoadOrderGroup, 1, $sLoadOrderGroup) $tTagId = DllStructCreate("dword[" & Number($fTagId) & "]") If IsArray($vDependencies) Then Local $iDepend, $tagDepend $iDepend = UBound($vDependencies) - 1 For $i = 0 To $iDepend $tagDepend &= "char[" & StringLen($vDependencies[$i]) + 1 & "];" Next $tDepend = DllStructCreate( StringTrimRight($tagDepend, 1) ) For $i = 0 To $iDepend DllStructSetData($tDepend, $i + 1, $vDependencies[$i]) Next Else $tDepend = DllStructCreate("char[" & Number($vDependencies <> Default) * ( StringLen($vDependencies) + 1 ) & "]") DllStructSetData($tDepend, 1, $vDependencies) EndIf $tServiceUser = DllStructCreate("char[" & Number($sServiceUser <> Default) * ( StringLen($sServiceUser) + 1 ) & "]") DllStructSetData($tServiceUser, 1, $sServiceUser) $tPassword = DllStructCreate("char[" & Number($sPassword <> Default) * ( StringLen($sPassword) + 1 ) & "]") DllStructSetData($tPassword, 1, $sPassword) $tDisplayName = DllStructCreate("char[" & Number($sDisplayName <> Default) * ( StringLen($sDisplayName) + 1 ) & "]") DllStructSetData($tDisplayName, 1, $sDisplayName) $hSC = OpenSCManager($sComputerName, $SC_MANAGER_CONNECT) $hService = OpenService($hSC, $sServiceName, $SERVICE_CHANGE_CONFIG) CloseServiceHandle($hSC) $iSCh = ChangeServiceConfig( $hService, _ $iServiceType, _ $iStartType, _ $iErrorControl, _ DllStructGetPtr($tBinaryPath), _ DllStructGetPtr($tLoadOrderGroup), _ DllStructGetPtr($tTagId), _ DllStructGetPtr($tDepend), _ DllStructGetPtr($tServiceUser), _ DllStructGetPtr($tPassword), _ DllStructGetPtr($tDisplayName) ) If $iSCh = 0 Then $iSChE = GetLastError() CloseServiceHandle($hService) Return SetError($iSChE, DllStructGetData($tTagId, 1), $iSCh) EndFunc ;==> _Service_Change ; #FUNCTION# ======================================================================================================================================================= ; Name...........: _Service_Create ; Description ...: Creates a service. ; Syntax.........: _Service_Create($sServiceName, $sDisplayName, $iServiceType, $iStartType, $iErrorControl, $sBinaryPath _ ; [, $sLoadOrderGroup, $fTagId, $vDependencies, $sServiceUser, $sPassword, $sComputerName]) ; Parameters ....: $sServiceName - Name of the service. ; $sDisplayName - The display name to be used by user interface programs to identify the service. The maximum string length is 256 characters. ; The service control manager database preserves the case of the characters, ; but service name comparisons are always case insensitive. ; Forward-slash (/) and back-slash (\) are invalid service name characters. ; $iServiceType - The type of service. Specify one of the following service types: ; $SERVICE_KERNEL_DRIVER - Driver service. ; $SERVICE_FILE_SYSTEM_DRIVER - File system driver service. ; $SERVICE_WIN32_OWN_PROCESS - Service that runs in its own process. ; $SERVICE_WIN32_SHARE_PROCESS - Service that shares a process with other services. ; If you specify either $SERVICE_WIN32_OWN_PROCESS or $SERVICE_WIN32_SHARE_PROCESS, ; and the service is running in the context of the LocalSystem account, you can also specify the following type: ; $SERVICE_INTERACTIVE_PROCESS - The service can interact with the desktop. ; $iStartType - The service start options. Specify one of the following start types: ; $SERVICE_BOOT_START - A device driver started by the system loader. This value is valid only for driver services. ; $SERVICE_SYSTEM_START - A device driver started by the IoInitSystem function. This value is valid only for driver services. ; $SERVICE_AUTO_START - A service started automatically by the service control manager during system startup. ; $SERVICE_DEMAND_START - A service started by the service control manager when a process calls the StartService function. ; $SERVICE_DISABLED - A service that cannot be started. ; $iErrorControl - The severity of the error, and action taken, if this service fails to start. Specify one of the following values: ; $SERVICE_ERROR_IGNORE - The startup program ignores the error and continues the startup operation. ; $SERVICE_ERROR_NORMAL - The startup program logs the error in the event log but continues the startup operation. ; $SERVICE_ERROR_SEVERE - The startup program logs the error in the event log. ; If the last-known-good configuration is being started, the startup operation continues. ; Otherwise, the system is restarted with the last-known-good configuration. ; $SERVICE_ERROR_CRITICAL - The startup program logs the error in the event log, if possible. ; If the last-known-good configuration is being started, the startup operation fails. ; Otherwise, the system is restarted with the last-known good configuration. ; $sBinaryPath - The fully-qualified path to the service binary file. If the path contains a space, ; it must be quoted so that it is correctly interpreted. ; For example, "d:\\my share\\myservice.exe" should be specified as "\"d:\\my share\\myservice.exe\"". ; The path can also include arguments for an auto-start service. For example, "d:\\myshare\\myservice.exe arg1 arg2". ; These arguments are passed to the service entry point (typically the main function). ; $sLoadOrderGroup - [Optional] The name of the load ordering group of which this service is a member. ; Specify "Default" or an empty string if the service does not belong to a group. ; $fTagId - [Optional] Specify "True" if you desire a tag value that is unique in the group specified in the $sLoadOrderGroup parameter. ; Specify "False" or "Default" if you do not desire a tag value. ; The tag value is stored in @extended macro. ; You can use a tag for ordering service startup within a load ordering group by specifying a tag order vector in the ; GroupOrderList value of the following registry key: ; HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control ; Tags are only evaluated for driver services that have $SERVICE_BOOT_START or $SERVICE_SYSTEM_START start types. ; $vDependencies - [Optional] An array of services or load ordering groups that the system must start before this service can be started. ; (Dependency on a group means that this service can run if at least one member of the group is running after an attempt to ; start all members of the group.) Specify "Default" or an empty string if the service has no dependencies. ; You must prefix group names with a plus sign ("+") so that they can be distinguished from a service name, ; because services and service groups share the same name space. ; $sServiceUser - [Optional] The name of the account under which the service should run. ; If the service type is $SERVICE_WIN32_OWN_PROCESS, use an account name in the form DomainName\UserName. ; The service process will be logged on as this user. If the account belongs to the built-in domain, ; you can specify .\UserName . A shared process can run as any user. ; If the service type is $SERVICE_KERNEL_DRIVER or $SERVICE_FILE_SYSTEM_DRIVER, ; the name is the driver object name that the system uses to load the device driver. ; Specify "Default" if the driver is to use a default object name created by the I/O system. ; $sPassword - [Optional] The password to the account name specified by the $sServiceUser parameter. ; Specify "Default" or an empty string if the account has no password or if the service runs in the LocalService, NetworkService, ; or LocalSystem account. Passwords are ignored for driver services. ; $sComputerName - [Optional] The name of the target computer. The local computer is default. ; Requirement(s).: Administrative rights on the target computer. ; Return values .: Success - 1 ; Failure - 0 ; Sets @error ; Author ........: engine ; Modified.......: ; Remarks .......: ; Related .......: ; Link ..........: ; Example .......: ; ================================================================================================================================================================== Func _Service_Create( $sServiceName, _ $sDisplayName, _ $iServiceType, _ $iStartType, _ $iErrorControl, _ $sBinaryPath, _ $sLoadOrderGroup = Default, _ $fTagId = Default, _ $vDependencies = Default, _ $sServiceUser = Default, _ $sPassword = Default, _ $sComputerName = Default ) Local $tLoadOrderGroup, $tTagId, $tDepend, $tServiceUser, $tPassword, $hSC, $avSC, $iSC $tLoadOrderGroup = DllStructCreate("char[" & Number($sLoadOrderGroup <> Default) * ( StringLen($sLoadOrderGroup) + 1 ) & "]") DllStructSetData($tLoadOrderGroup, 1, $sLoadOrderGroup) $tTagId = DllStructCreate("dword[" & Number($fTagId) & "]") If IsArray($vDependencies) Then Local $iDepend, $tagDepend $iDepend = UBound($vDependencies) - 1 For $i = 0 To $iDepend $tagDepend &= "char[" & StringLen($vDependencies[$i]) + 1 & "];" Next $tDepend = DllStructCreate( StringTrimRight($tagDepend, 1) ) For $i = 0 To $iDepend DllStructSetData($tDepend, $i + 1, $vDependencies[$i]) Next Else $tDepend = DllStructCreate("char[" & Number($vDependencies <> Default) * ( StringLen($vDependencies) + 1 ) & "]") DllStructSetData($tDepend, 1, $vDependencies) EndIf $tServiceUser = DllStructCreate("char[" & Number($sServiceUser <> Default) * ( StringLen($sServiceUser) + 1 ) & "]") DllStructSetData($tServiceUser, 1, $sServiceUser) $tPassword = DllStructCreate("char[" & Number($sPassword <> Default) * ( StringLen($sPassword) + 1 ) & "]") DllStructSetData($tPassword, 1, $sPassword) $hSC = OpenSCManager($sComputerName, $SC_MANAGER_CREATE_SERVICE) $avSC = DllCall( "advapi32.dll", "hwnd", "CreateService", _ "hwnd", $hSC, _ "str", $sServiceName, _ "str", $sDisplayName, _ "dword", $SERVICE_ALL_ACCESS, _ "dword", $iServiceType, _ "dword", $iStartType, _ "dword", $iErrorControl, _ "str", $sBinaryPath, _ "ptr", DllStructGetPtr($tLoadOrderGroup), _ "ptr", DllStructGetPtr($tTagId), _ "ptr", DllStructGetPtr($tDepend), _ "ptr", DllStructGetPtr($tServiceUser), _ "ptr", DllStructGetPtr($tPassword) ) If $avSC[0] = 0 Then $iSC = GetLastError() Else CloseServiceHandle($avSC[0]) EndIf CloseServiceHandle($hSC) Return SetError( $iSC, DllStructGetData($tTagId, 1), Number($avSC[0] <> 0) ) EndFunc ;==> _Service_Create ; #FUNCTION# ======================================================================================================================================================= ; Name...........: _Service_Delete ; Description ...: Deletes a service. ; Syntax.........: _Service_Delete($sServiceName [, $sComputerName]) ; Parameters ....: $sServiceName - Name of the service. ; $sComputerName - [Optional] The name of the target computer. The local computer is default. ; Requirement(s).: Administrative rights on the target computer. ; Return values .: Success - 1 ; Failure - 0 ; Sets @error ; Author ........: engine ; Modified.......: ; Remarks .......: ; Related .......: ; Link ..........: ; Example .......: ; ================================================================================================================================================================== Func _Service_Delete($sServiceName, $sComputerName = "") Local $hSC, $hService, $avDS, $iDS $hSC = OpenSCManager($sComputerName, $SC_MANAGER_CONNECT) $hService = OpenService($hSC, $sServiceName, $RIGHTS_DELETE) CloseServiceHandle($hSC) $avDS = DllCall( "advapi32.dll", "int", "DeleteService", _ "hwnd", $hService ) If $avDS[0] = 0 Then $iDS = GetLastError() CloseServiceHandle($hService) Return SetError($iDS, 0, $avDS[0]) EndFunc ;==> _Service_Delete ; #FUNCTION# ======================================================================================================================================================= ; Name...........: _Service_Enum ; Description ...: Enumerates services in the specified service control manager database. The name and status of each service are provided, ; along with additional data based on the specified information level. ; Syntax.........: _Service_Enum($iServiceType [, $iServiceState, $sLoadOrderGroup, $sComputerName]) ; Parameters ....: $iServiceType - The type of services to be enumerated. This parameter can be one or more of the following values: ; $SERVICE_DRIVER - Enumerates services of type $SERVICE_KERNEL_DRIVER and $SERVICE_FILE_SYSTEM_DRIVER. ; $SERVICE_WIN32 - Enumerates services of type $SERVICE_WIN32_OWN_PROCESS and $SERVICE_WIN32_SHARE_PROCESS. ; $iServiceState - [Optional] The state of the services to be enumerated. This parameter can be one of the following values: ; $SERVICE_ACTIVE - Enumerates services that are in the following states: $SERVICE_START_PENDING, $SERVICE_STOP_PENDING, ; $SERVICE_RUNNING, $SERVICE_CONTINUE_PENDING, $SERVICE_PAUSE_PENDING, and $SERVICE_PAUSED. ; $SERVICE_INACTIVE - Enumerates services that are in the $SERVICE_STOPPED state. ; $SERVICE_STATE_ALL - Combines the following states: $SERVICE_ACTIVE and $SERVICE_INACTIVE. ; Default is $SERVICE_STATE_ALL. ; $sLoadOrderGroup - [Optional] The load-order group name. If this parameter is a string, ; the only services enumerated are those that belong to the group that has the name specified by the string. ; If this parameter is an empty string, only services that do not belong to any group are enumerated. ; If this parameter is "Default", group membership is ignored and all services are enumerated. ; $sComputerName - [Optional] The name of the target computer. The local computer is default. ; Requirement(s).: None. ; Return values .: Success - An array of service names and their respective status: ; $Array[0][0] - The number of services reported. ; $Array[n][0] - Service name. ; $Array[n][1] - Service display name. ; $Array[n][2] - The type of service. Can be one of the following values: ; $SERVICE_KERNEL_DRIVER - The service is a device driver. ; $SERVICE_FILE_SYSTEM_DRIVER - The service is a file system driver. ; $SERVICE_WIN32_OWN_PROCESS - The service runs in its own process. ; $SERVICE_WIN32_SHARE_PROCESS - The service shares a process with other services. ; BitOR($SERVICE_WIN32_OWN_PROCESS, $SERVICE_INTERACTIVE_PROCESS) - The service runs in its own process ; and can interact with the desktop. ; BitOR($SERVICE_WIN32_SHARE_PROCESS, $SERVICE_INTERACTIVE_PROCESS) - The service shares a process with other services ; and can interact with the desktop. ; $Array[n][3] - The current state of the service. Can be one of the following values: ; $SERVICE_STOPPED - The service has stopped. ; $SERVICE_START_PENDING - The service is starting. ; $SERVICE_STOP_PENDING - The service is stopping. ; $SERVICE_RUNNING - The service is running. ; $SERVICE_CONTINUE_PENDING - The service is about to continue. ; $SERVICE_PAUSE_PENDING - The service is pausing. ; $SERVICE_PAUSED - The service is paused. ; $Array[n][4] - The control codes the service accepts and processes in its handler function (see Handler and HandlerEx). ; A user interface process can control a service by specifying a control command in the ControlService or ; ControlServiceEx function. By default, all services accept the $SERVICE_CONTROL_INTERROGATE value. ; Can be one of the following values: ; $SERVICE_ACCEPT_STOP - The service can be stopped. ; $SERVICE_ACCEPT_PAUSE_CONTINUE - The service can be paused and continued. ; $SERVICE_ACCEPT_SHUTDOWN - The service is notified when system shutdown occurs. ; $SERVICE_ACCEPT_PARAMCHANGE - The service can reread its startup parameters without being stopped and restarted. ; $SERVICE_ACCEPT_NETBINDCHANGE - The service is a network component that can accept changes ; in its binding without being stopped and restarted. ; $SERVICE_ACCEPT_HARDWAREPROFILECHANGE - The service is notified when the computer's hardware profile has changed. ; $SERVICE_ACCEPT_POWEREVENT - The service is notified when the computer's power status has changed. ; $SERVICE_ACCEPT_SESSIONCHANGE - The service is notified when the computer's session status has changed. ; $SERVICE_ACCEPT_PRESHUTDOWN - The service can perform preshutdown tasks. ; $Array[n][5] - The error code that the service uses to report an error that occurs when it is starting or stopping. ; To return an error code specific to the service, the service must set this value to $ERROR_SERVICE_SPECIFIC_ERROR ; to indicate that the next value ($Array[n][6]) returns the error code. ; The service should set this value to $NO_ERROR when it is running and when it terminates normally. ; $Array[n][6] - The service-specific error code that the service returns when an error occurs while the service is ; starting or stopping. This value is ignored unless the previous value ($Array[n][5]) reports $ERROR_SERVICE_SPECIFIC_ERROR. ; $Array[n][7] - The check-point value that the service increments periodically to report its progress during a lengthy start, ; stop, pause, or continue operation. ; For example, the service should increment this value as it completes each step of its initialization when it is starting up. ; The user interface program that invoked the operation on the service uses this value to track the progress ; of the service during a lengthy operation. ; This value is not valid and should be zero when the service does not have a start, stop, pause, or continue operation pending. ; $Array[n][8] - The estimated time required for a pending start, stop, pause, or continue operation, in milliseconds. ; $Array[n][9] - The process identifier of the service (PID). ; $Array[n][10] - Can be one of the following values: ; 0 - The service is running in a process that is not a system process, or it is not running. ; $SERVICE_RUNS_IN_SYSTEM_PROCESS - The service runs in a system process that must always be running. ; Where "n" is an integer between 1 and $Array[0][0]. This number is the service's index in the array. ; Failure - Sets @error ; Author ........: engine ; Modified.......: ; Remarks .......: ; Related .......: ; Link ..........: ; Example .......: ; ================================================================================================================================================================== Func _Service_Enum($iServiceType, $iServiceState = $SERVICE_STATE_ALL, $sLoadOrderGroup = Default, $sComputerName = "") Local $tLoadOrderGroup, $pLoadOrderGroup, $hSC, $avEA, $tEB, $avEB, $iEE, $iES, $tagEC, $tEC, $tED $tLoadOrderGroup = DllStructCreate("char[" & Number($sLoadOrderGroup <> Default) * ( StringLen($sLoadOrderGroup) + 1 ) & "]") DllStructSetData($tLoadOrderGroup, 1, $sLoadOrderGroup) $pLoadOrderGroup = DllStructGetPtr($tLoadOrderGroup) $hSC = OpenSCManager($sComputerName, $SC_MANAGER_ENUMERATE_SERVICE) ; Determine needed size of the struct in bytes $avEA = DllCall( "advapi32.dll", "int", "EnumServicesStatusEx", _ "hwnd", $hSC, _ "dword", $SC_ENUM_PROCESS_INFO, _ "dword", $iServiceType, _ "dword", $iServiceState, _ "ptr", 0, _ "dword", 0, _ "dword*", 0, _ "dword*", 0, _ "dword*", 0, _ "ptr", $pLoadOrderGroup ) ; Get Service data $tEB = DllStructCreate("ubyte[" & $avEA[7] & "]") $avEB = DllCall( "advapi32.dll", "int", "EnumServicesStatusEx", _ "hwnd", $hSC, _ "dword", $SC_ENUM_PROCESS_INFO, _ "dword", $iServiceType, _ "dword", $iServiceState, _ "ptr", DllStructGetPtr($tEB), _ "dword", DllStructGetSize($tEB), _ "dword*", 0, _ "dword*", 0, _ "dword*", 0, _ "ptr", $pLoadOrderGroup ) ; Get last error and close service control manager database handle If $avEB[0] = 0 Then $iEE = GetLastError() CloseServiceHandle($hSC) ; Decode the ubyte structure While $iES < $avEB[8] $iES += 1 $tagEC &= "uint_ptr[2];dword[9];" WEnd $tEC = DllStructCreate( StringTrimRight($tagEC, 1), $avEB[5] ) Local $aiEC[$avEB[8] + 1][2] For $i = 1 To $avEB[8] $aiEC[$i][0] = DllStructGetData($tEC, 2 * ($i - 1) - 1, 2) - DllStructGetData($tEC, 2 * $i - 1, 1) $aiEC[$i][1] = DllStructGetData($tEC, 2 * $i - 1, 1) - DllStructGetData($tEC, 2 * $i - 1, 2) Next If $avEB[8] > 0 Then $aiEC[1][0] = Execute($avEB[5]) + $avEB[6] - DllStructGetData($tEC, 1, 1) Local $asED[$avEB[8] + 1][11] $asED[0][0] = $avEB[8] For $i = 1 To $avEB[8] For $k = 0 To 1 $tED = DllStructCreate( "char[" & $aiEC[$i][$k] & "]", DllStructGetData($tEC, 2 * $i - 1, $k + 1) ) $asED[$i][$k] = DllStructGetData($tED, 1) Next For $k = 2 To UBound($asED, 2) - 1 $asED[$i][$k] = DllStructGetData($tEC, 2 * $i, $k - 1) Next Next Return SetError($iEE, 0, $asED) EndFunc ;==> _Service_Enum ; #FUNCTION# ======================================================================================================================================================= ; Name...........: _Service_EnumDependent ; Description ...: Retrieves the name and status of each service that depend on the specified service; ; that is, the specified service must be running before the dependent services can run. ; Syntax.........: _Service_EnumDependent($sServiceName [, $iServiceState, $sComputerName]) ; Parameters ....: $sServiceName - Name of the service. ; $iServiceState - [Optional] The state of the services to be enumerated. This parameter can be one of the following values: ; $SERVICE_ACTIVE - Enumerates services that are in the following states: $SERVICE_START_PENDING, $SERVICE_STOP_PENDING, ; $SERVICE_RUNNING, $SERVICE_CONTINUE_PENDING, $SERVICE_PAUSE_PENDING, and $SERVICE_PAUSED. ; $SERVICE_INACTIVE - Enumerates services that are in the $SERVICE_STOPPED state. ; $SERVICE_STATE_ALL - Combines the following states: $SERVICE_ACTIVE and $SERVICE_INACTIVE. ; Default is $SERVICE_STATE_ALL. ; $sComputerName - [Optional] The name of the target computer. The local computer is default. ; Requirement(s).: None. ; Return values .: Success - An array of service names and their respective status: ; $Array[0][0] - The number of services reported. ; $Array[n][0] - Service name. ; $Array[n][1] - Service display name. ; $Array[n][2] - The type of service. Can be one of the following values: ; $SERVICE_KERNEL_DRIVER - The service is a device driver. ; $SERVICE_FILE_SYSTEM_DRIVER - The service is a file system driver. ; $SERVICE_WIN32_OWN_PROCESS - The service runs in its own process. ; $SERVICE_WIN32_SHARE_PROCESS - The service shares a process with other services. ; BitOR($SERVICE_WIN32_OWN_PROCESS, $SERVICE_INTERACTIVE_PROCESS) - The service runs in its own process ; and can interact with the desktop. ; BitOR($SERVICE_WIN32_SHARE_PROCESS, $SERVICE_INTERACTIVE_PROCESS) - The service shares a process with other services ; and can interact with the desktop. ; $Array[n][3] - The current state of the service. Can be one of the following values: ; $SERVICE_STOPPED - The service has stopped. ; $SERVICE_START_PENDING - The service is starting. ; $SERVICE_STOP_PENDING - The service is stopping. ; $SERVICE_RUNNING - The service is running. ; $SERVICE_CONTINUE_PENDING - The service is about to continue. ; $SERVICE_PAUSE_PENDING - The service is pausing. ; $SERVICE_PAUSED - The service is paused. ; $Array[n][4] - The control codes the service accepts and processes in its handler function (see Handler and HandlerEx). ; A user interface process can control a service by specifying a control command in the ControlService or ; ControlServiceEx function. By default, all services accept the $SERVICE_CONTROL_INTERROGATE value. ; Can be one of the following values: ; $SERVICE_ACCEPT_STOP - The service can be stopped. ; $SERVICE_ACCEPT_PAUSE_CONTINUE - The service can be paused and continued. ; $SERVICE_ACCEPT_SHUTDOWN - The service is notified when system shutdown occurs. ; $SERVICE_ACCEPT_PARAMCHANGE - The service can reread its startup parameters without being stopped and restarted. ; $SERVICE_ACCEPT_NETBINDCHANGE - The service is a network component that can accept changes ; in its binding without being stopped and restarted. ; $SERVICE_ACCEPT_HARDWAREPROFILECHANGE - The service is notified when the computer's hardware profile has changed. ; $SERVICE_ACCEPT_POWEREVENT - The service is notified when the computer's power status has changed. ; $SERVICE_ACCEPT_SESSIONCHANGE - The service is notified when the computer's session status has changed. ; $SERVICE_ACCEPT_PRESHUTDOWN - The service can perform preshutdown tasks. ; $Array[n][5] - The error code that the service uses to report an error that occurs when it is starting or stopping. ; To return an error code specific to the service, the service must set this value to $ERROR_SERVICE_SPECIFIC_ERROR ; to indicate that the next value ($Array[n][6]) returns the error code. ; The service should set this value to $NO_ERROR when it is running and when it terminates normally. ; $Array[n][6] - The service-specific error code that the service returns when an error occurs while the service is ; starting or stopping. This value is ignored unless the previous value ($Array[n][5]) reports $ERROR_SERVICE_SPECIFIC_ERROR. ; $Array[n][7] - The check-point value that the service increments periodically to report its progress during a lengthy start, ; stop, pause, or continue operation. ; For example, the service should increment this value as it completes each step of its initialization when it is starting up. ; The user interface program that invoked the operation on the service uses this value to track the progress ; of the service during a lengthy operation. ; This value is not valid and should be zero when the service does not have a start, stop, pause, or continue operation pending. ; $Array[n][8] - The estimated time required for a pending start, stop, pause, or continue operation, in milliseconds. ; Where "n" is an integer between 1 and $Array[0][0]. This number is the service's index in the array. ; Failure - Sets @error ; Author ........: engine ; Modified.......: ; Remarks .......: ; Related .......: ; Link ..........: ; Example .......: ; ================================================================================================================================================================== Func _Service_EnumDependent($sServiceName, $iServiceState = $SERVICE_STATE_ALL, $sComputerName = "") Local $hSC, $hService, $avA, $tB, $avB, $iE, $iS, $tagC, $tC, $tD $hSC = OpenSCManager($sComputerName, $SC_MANAGER_CONNECT) $hService = OpenService($hSC, $sServiceName, $SERVICE_ENUMERATE_DEPENDENTS) CloseServiceHandle($hSC) ; Determine needed size of the struct in bytes $avA = DllCall( "advapi32.dll", "int", "EnumDependentServices", _ "hwnd", $hService, _ "dword", $iServiceState, _ "ptr", 0, _ "dword", 0, _ "dword*", 0, _ "dword*", 0 ) ; Get Service data $tB = DllStructCreate("ubyte[" & $avA[5] & "]") $avB = DllCall( "advapi32.dll", "int", "EnumDependentServices", _ "hwnd", $hService, _ "dword", $iServiceState, _ "ptr", DllStructGetPtr($tB), _ "dword", DllStructGetSize($tB), _ "dword*", 0, _ "dword*", 0 ) ; Get last error and close service handle If $avB[0] = 0 Then $iE = GetLastError() CloseServiceHandle($hService) ; Decode the ubyte structure While $iS < $avB[6] $iS += 1 $tagC &= "uint_ptr[2];dword[7];" WEnd $tC = DllStructCreate( StringTrimRight($tagC, 1), $avB[3] ) Local $aiC[$avB[6] + 1][2] For $i = 1 To $avB[6] $aiC[$i][0] = DllStructGetData($tC, 2 * ($i - 1) - 1, 2) - DllStructGetData($tC, 2 * $i - 1, 1) $aiC[$i][1] = DllStructGetData($tC, 2 * $i - 1, 1) - DllStructGetData($tC, 2 * $i - 1, 2) Next If $avB[6] > 0 Then $aiC[1][0] = Execute($avB[3]) + $avB[4] - DllStructGetData($tC, 1, 1) Local $asD[$avB[6] + 1][9] $asD[0][0] = $avB[6] For $i = 1 To $avB[6] For $k = 0 To 1 $tD = DllStructCreate( "char[" & $aiC[$i][$k] & "]", DllStructGetData($tC, 2 * $i - 1, $k + 1) ) $asD[$i][$k] = DllStructGetData($tD, 1) Next For $k = 2 To UBound($asD, 2) - 1 $asD[$i][$k] = DllStructGetData($tC, 2 * $i, $k - 1) Next Next Return SetError($iE, 0, $asD) EndFunc ;==> _Service_EnumDependent ; #FUNCTION# ======================================================================================================================================================= ; Name...........: _Service_Exists ; Description ...: Checks if a service exists. ; Syntax.........: _Service_Exists($sServiceName [, $sComputerName]) ; Parameters ....: $sServiceName - Name of the service. ; $sComputerName - [Optional] The name of the target computer. The local computer is default. ; Requirement(s).: None. ; Return values .: Success - 1 ; Failure - 0 ; Author ........: engine ; Modified.......: ; Remarks .......: ; Related .......: ; Link ..........: ; Example .......: ; ================================================================================================================================================================== Func _Service_Exists($sServiceName, $sComputerName = "") Local $hSC, $hService $hSC = OpenSCManager($sComputerName, $SC_MANAGER_CONNECT) $hService = OpenService($hSC, $sServiceName, $SERVICE_INTERROGATE) CloseServiceHandle($hSC) CloseServiceHandle($hService) Return Number($hService <> 0) EndFunc ;==> _Service_Exists ; #FUNCTION# ======================================================================================================================================================= ; Name...........: _Service_Pause ; Description ...: Pauses a service. ; Syntax.........: _Service_Pause($sServiceName [, $sComputerName]) ; Parameters ....: $sServiceName - Name of the service. ; $sComputerName - [Optional] The name of the target computer. The local computer is default. ; Requirement(s).: Administrative rights on the target computer. ; Return values .: Success - 1 ; Failure - 0 ; Sets @error ; Author ........: engine ; Modified.......: ; Remarks .......: ; Related .......: ; Link ..........: ; Example .......: ; ================================================================================================================================================================== Func _Service_Pause($sServiceName, $sComputerName = "") Local $hSC, $hService, $iCSP, $iCSPE $hSC = OpenSCManager($sComputerName, $SC_MANAGER_CONNECT) $hService = OpenService($hSC, $sServiceName, $SERVICE_PAUSE_CONTINUE) CloseServiceHandle($hSC) $iCSP = ControlService($hService, $SERVICE_CONTROL_PAUSE) If $iCSP = 0 Then $iCSPE = GetLastError() CloseServiceHandle($hService) Return SetError($iCSPE, 0, $iCSP) EndFunc ;==> _Service_Pause ; #FUNCTION# ======================================================================================================================================================= ; Name...........: _Service_Resume ; Description ...: Resumes a service. ; Syntax.........: _Service_Resume($sServiceName [, $sComputerName]) ; Parameters ....: $sServiceName - Name of the service. ; $sComputerName - [Optional] The name of the target computer. The local computer is default. ; Requirement(s).: Administrative rights on the target computer. ; Return values .: Success - 1 ; Failure - 0 ; Sets @error ; Author ........: engine ; Modified.......: ; Remarks .......: ; Related .......: ; Link ..........: ; Example .......: ; ================================================================================================================================================================== Func _Service_Resume($sServiceName, $sComputerName = "") Local $hSC, $hService, $iCSR, $iCSRE $hSC = OpenSCManager($sComputerName, $SC_MANAGER_CONNECT) $hService = OpenService($hSC, $sServiceName, $SERVICE_PAUSE_CONTINUE) CloseServiceHandle($hSC) $iCSR = ControlService($hService, $SERVICE_CONTROL_CONTINUE) If $iCSR = 0 Then $iCSRE = GetLastError() CloseServiceHandle($hService) Return SetError($iCSRE, 0, $iCSR) EndFunc ;==> _Service_Resume ; #FUNCTION# ======================================================================================================================================================= ; Name...........: _Service_QueryAccount ; Description ...: Retrieves the name of the account under which a given service runs. ; Syntax.........: _Service_QueryAccount($sServiceName [, $sComputerName]) ; Parameters ....: $sServiceName - Name of the service. ; $sComputerName - [Optional] The name of the target computer. The local computer is default. ; Requirement(s).: None. ; Return values .: Success - The name of the account under which the service runs. ; Failure - An empty string. ; Sets @error ; Author ........: engine ; Modified.......: ; Remarks .......: ; Related .......: ; Link ..........: ; Example .......: ; ================================================================================================================================================================== Func _Service_QueryAccount($sServiceName, $sComputerName = "") Local $hSC, $hService, $avQA, $tQB, $avQB, $iQE, $tQC, $pServiceUser, $pDisplayName, $pEnd, $sServiceUser $hSC = OpenSCManager($sComputerName, $SC_MANAGER_CONNECT) $hService = OpenService($hSC, $sServiceName, $SERVICE_QUERY_CONFIG) CloseServiceHandle($hSC) ; Determine needed size of the struct in bytes $avQA = QueryServiceConfig($hService, 0, 0) ; Get Service data $tQB = DllStructCreate("ubyte[" & $avQA[4] & "]") $avQB = QueryServiceConfig( $hService, DllStructGetPtr($tQB), DllStructGetSize($tQB) ) ; Get last error and close service handle If $avQB[0] = 0 Then $iQE = GetLastError() CloseServiceHandle($hService) ; Decode the ubyte structure $tQC = DllStructCreate("dword[3];uint_ptr[2];dword;uint_ptr[3]", $avQB[2]) $pServiceUser = DllStructGetData($tQC, 4, 2) $pDisplayName = DllStructGetData($tQC, 4, 3) $pEnd = Execute($avQB[2] + $avQB[3]) If $pServiceUser > 0 Then Local $tServiceUser = DllStructCreate("char[" & Number($pDisplayName = 0) * $pEnd + $pDisplayName - $pServiceUser & "]", $pServiceUser) $sServiceUser = DllStructGetData($tServiceUser, 1) EndIf Return SetError($iQE, 0, $sServiceUser) EndFunc ;==> _Service_QueryAccount ; #FUNCTION# ======================================================================================================================================================= ; Name...........: _Service_QueryBinaryPath ; Description ...: Retrieves the fully-qualified path to the binary file of a given service. ; Syntax.........: _Service_QueryBinaryPath($sServiceName [, $sComputerName]) ; Parameters ....: $sServiceName - Name of the service. ; $sComputerName - [Optional] The name of the target computer. The local computer is default. ; Requirement(s).: None. ; Return values .: Success - The fully-qualified path to the service binary file. ; Failure - An empty string. ; Sets @error ; Author ........: engine ; Modified.......: ; Remarks .......: ; Related .......: ; Link ..........: ; Example .......: ; ================================================================================================================================================================== Func _Service_QueryBinaryPath($sServiceName, $sComputerName = "") Local $hSC, $hService, $avQA, $tQB, $avQB, $iQE, $tQC, $pBinaryPath, $pGroup, $pDep, $pServiceUser, $pDisplayName, $pEnd, $p0, $p1, $p2, $p3, $sBinaryPath $hSC = OpenSCManager($sComputerName, $SC_MANAGER_CONNECT) $hService = OpenService($hSC, $sServiceName, $SERVICE_QUERY_CONFIG) CloseServiceHandle($hSC) ; Determine needed size of the struct in bytes $avQA = QueryServiceConfig($hService, 0, 0) ; Get Service data $tQB = DllStructCreate("ubyte[" & $avQA[4] & "]") $avQB = QueryServiceConfig( $hService, DllStructGetPtr($tQB), DllStructGetSize($tQB) ) ; Get last error and close service handle If $avQB[0] = 0 Then $iQE = GetLastError() CloseServiceHandle($hService) ; Decode the ubyte structure $tQC = DllStructCreate("dword[3];uint_ptr[2];dword;uint_ptr[3]", $avQB[2]) $pBinaryPath = DllStructGetData($tQC, 2, 1) $pGroup = DllStructGetData($tQC, 2, 2) $pDep = DllStructGetData($tQC, 4, 1) $pServiceUser = DllStructGetData($tQC, 4, 2) $pDisplayName = DllStructGetData($tQC, 4, 3) $pEnd = Execute($avQB[2] + $avQB[3]) $p0 = Number($pDisplayName = 0) * $pEnd + $pDisplayName $p1 = Number($pServiceUser = 0) * $p0 + $pServiceUser $p2 = Number($pDep = 0) * $p1 + $pDep $p3 = Number($pGroup = 0) * $p2 + $pGroup If $pBinaryPath > 0 Then Local $tBinaryPath = DllStructCreate("char[" & $p3 - $pBinaryPath & "]", $pBinaryPath) $sBinaryPath = DllStructGetData($tBinaryPath, 1) EndIf Return SetError($iQE, 0, $sBinaryPath) EndFunc ;==> _Service_QueryBinaryPath ; #FUNCTION# ======================================================================================================================================================= ; Name...........: _Service_QueryConfig ; Description ...: Retrieves the configuration of a service. ; Syntax.........: _Service_QueryConfig($sServiceName [, $sComputerName]) ; Parameters ....: $sServiceName - Name of the service. ; $sComputerName - [Optional] The name of the target computer. The local computer is default. ; Requirement(s).: None. ; Return values .: Success - An array where: ; $Array[0] - The type of service. Can be one of the following values: ; $SERVICE_KERNEL_DRIVER - The service is a device driver. ; $SERVICE_FILE_SYSTEM_DRIVER - The service is a file system driver. ; $SERVICE_WIN32_OWN_PROCESS - The service runs in its own process. ; $SERVICE_WIN32_SHARE_PROCESS - The service shares a process with other services. ; BitOR($SERVICE_WIN32_OWN_PROCESS, $SERVICE_INTERACTIVE_PROCESS) - The service runs in its own process ; and can interact with the desktop. ; BitOR($SERVICE_WIN32_SHARE_PROCESS, $SERVICE_INTERACTIVE_PROCESS) - The service shares a process with other services ; and can interact with the desktop. ; $Array[1] - The service start options. Can be one of the following values: ; $SERVICE_BOOT_START - A device driver started by the system loader. This value is valid only for driver services. ; $SERVICE_SYSTEM_START - A device driver started by the IoInitSystem function. This value is valid only for driver services. ; $SERVICE_AUTO_START - A service started automatically by the service control manager during system startup. ; $SERVICE_DEMAND_START - A service started by the service control manager when a process calls the StartService function. ; $SERVICE_DISABLED - A service that cannot be started. ; $Array[2] - The severity of the error, and action taken, if this service fails to start. Can be one of the following values: ; $SERVICE_ERROR_IGNORE - The startup program ignores the error and continues the startup operation. ; $SERVICE_ERROR_NORMAL - The startup program logs the error in the event log but continues the startup operation. ; $SERVICE_ERROR_SEVERE - The startup program logs the error in the event log. ; If the last-known-good configuration is being started, the startup operation continues. ; Otherwise, the system is restarted with the last-known-good configuration. ; $SERVICE_ERROR_CRITICAL - The startup program logs the error in the event log, if possible. ; If the last-known-good configuration is being started, the startup operation fails. ; Otherwise, the system is restarted with the last-known good configuration. ; $Array[3] - The fully-qualified path to the service binary file. ; $Array[4] - The name of the load ordering group to which this service belongs. If this element is an empty string, ; the service does not belong to a load ordering group. ; $Array[5] - A unique tag value for this service in the group returned by $Array[4]. ; A value of zero indicates that the service has not been assigned a tag. ; $Array[6] - An array of service or load ordering group names: ; $array[0] - 1st service or load ordering group name. ; $array[1] - 2nd service or load ordering group name. ; ... ; $array[n] - (n + 1) th service or load ordering group name. ; In case there are no dependencies, this element is an empty string. ; Load ordering group names are prefixed with a plus sign ("+"). While service names are not. ; $Array[7] - The name of the account under which the service runs. ; $Array[8] - The service's display name. ; Failure - Sets @error ; Author ........: engine ; Modified.......: ; Remarks .......: ; Related .......: ; Link ..........: ; Example .......: ; ================================================================================================================================================================== Func _Service_QueryConfig($sServiceName, $sComputerName = "") Local $hSC, $hService, $avQA, $tQB, $avQB, $iQE, $tQC, $pBinaryPath, $pGroup, $pDep, $pServiceUser, $pDisplayName, $pEnd, _ $p0, $p1, $p2, $p3, $sBinaryPath, $sGroup, $tDep, $sFull, $sStrip, $vDep, $sServiceUser, $sDisplayName, $avConfig[9] $hSC = OpenSCManager($sComputerName, $SC_MANAGER_CONNECT) $hService = OpenService($hSC, $sServiceName, $SERVICE_QUERY_CONFIG) CloseServiceHandle($hSC) ; Determine needed size of the struct in bytes $avQA = QueryServiceConfig($hService, 0, 0) ; Get Service data $tQB = DllStructCreate("ubyte[" & $avQA[4] & "]") $avQB = QueryServiceConfig( $hService, DllStructGetPtr($tQB), DllStructGetSize($tQB) ) ; Get last error and close service handle If $avQB[0] = 0 Then $iQE = GetLastError() CloseServiceHandle($hService) ; Decode the ubyte structure $tQC = DllStructCreate("dword[3];uint_ptr[2];dword;uint_ptr[3]", $avQB[2]) $pBinaryPath = DllStructGetData($tQC, 2, 1) $pGroup = DllStructGetData($tQC, 2, 2) $pDep = DllStructGetData($tQC, 4, 1) $pServiceUser = DllStructGetData($tQC, 4, 2) $pDisplayName = DllStructGetData($tQC, 4, 3) $pEnd = Execute($avQB[2] + $avQB[3]) $p0 = Number($pDisplayName = 0) * $pEnd + $pDisplayName $p1 = Number($pServiceUser = 0) * $p0 + $pServiceUser $p2 = Number($pDep = 0) * $p1 + $pDep $p3 = Number($pGroup = 0) * $p2 + $pGroup If $pBinaryPath > 0 Then Local $tBinaryPath = DllStructCreate("char[" & $p3 - $pBinaryPath & "]", $pBinaryPath) $sBinaryPath = DllStructGetData($tBinaryPath, 1) EndIf If $pGroup > 0 Then Local $tGroup = DllStructCreate("char[" & $p2 - $pGroup & "]", $pGroup) $sGroup = DllStructGetData($tGroup, 1) EndIf $tDep = DllStructCreate("ubyte[" & $p1 - $pDep & "]", $pDep) $sFull = BinaryToString( DllStructGetData($tDep, 1), 1 ) $sStrip = StringMid( $sFull, 1, StringInStr( $sFull, Chr(0) & Chr(0) ) - 1 ) If $sStrip <> "" Then Local $asSplit = StringSplit( $sStrip, Chr(0) ), $vDep[$asSplit[0]] For $i = 1 To $asSplit[0] $vDep[$i - 1] = $asSplit[$i] Next EndIf If $pServiceUser > 0 Then Local $tServiceUser = DllStructCreate("char[" & $p0 - $pServiceUser & "]", $pServiceUser) $sServiceUser = DllStructGetData($tServiceUser, 1) EndIf If $pDisplayName > 0 Then Local $tDisplayName = DllStructCreate("char[" & $pEnd - $pDisplayName & "]", $pDisplayName) $sDisplayName = DllStructGetData($tDisplayName, 1) EndIf $avConfig[0] = DllStructGetData($tQC, 1, 1) $avConfig[1] = DllStructGetData($tQC, 1, 2) $avConfig[2] = DllStructGetData($tQC, 1, 3) $avConfig[3] = $sBinaryPath $avConfig[4] = $sGroup $avConfig[5] = DllStructGetData($tQC, 3) $avConfig[6] = $vDep $avConfig[7] = $sServiceUser $avConfig[8] = $sDisplayName Return SetError($iQE, 0, $avConfig) EndFunc ;==> _Service_QueryConfig ; #FUNCTION# ======================================================================================================================================================= ; Name...........: _Service_QueryDependencies ; Description ...: Retrieves the names of services or load ordering groups that must start before a service. ; Syntax.........: _Service_QueryDependencies($sServiceName [, $sComputerName]) ; Parameters ....: $sServiceName - Name of the service. ; $sComputerName - [Optional] The name of the target computer. The local computer is default. ; Requirement(s).: None. ; Return values .: Success - An array of service or load ordering group names: ; $Array[0] - 1st service or load ordering group name. ; $Array[1] - 2nd service or load ordering group name. ; ... ; $Array[n] - (n + 1) th service or load ordering group name. ; In case there are no dependencies, an empty string is returned. ; Failure - An empty string. ; Sets @error ; Author ........: engine ; Modified.......: ; Remarks .......: Load ordering group names are prefixed with a plus sign ("+"). While service names are not. ; Related .......: ; Link ..........: ; Example .......: ; ================================================================================================================================================================== Func _Service_QueryDependencies($sServiceName, $sComputerName = "") Local $hSC, $hService, $avQA, $tQB, $avQB, $iQE, $tQC, $pDep, $pServiceUser, $pDisplayName, $pEnd, $tDep, $sFull, $sStrip, $vDep $hSC = OpenSCManager($sComputerName, $SC_MANAGER_CONNECT) $hService = OpenService($hSC, $sServiceName, $SERVICE_QUERY_CONFIG) CloseServiceHandle($hSC) ; Determine needed size of the struct in bytes $avQA = QueryServiceConfig($hService, 0, 0) ; Get Service data $tQB = DllStructCreate("ubyte[" & $avQA[4] & "]") $avQB = QueryServiceConfig( $hService, DllStructGetPtr($tQB), DllStructGetSize($tQB) ) ; Get last error and close service handle If $avQB[0] = 0 Then $iQE = GetLastError() CloseServiceHandle($hService) ; Decode the ubyte structure $tQC = DllStructCreate("dword[3];uint_ptr[2];dword;uint_ptr[3]", $avQB[2]) $pDep = DllStructGetData($tQC, 4, 1) $pServiceUser = DllStructGetData($tQC, 4, 2) $pDisplayName = DllStructGetData($tQC, 4, 3) $pEnd = Execute($avQB[2] + $avQB[3]) $tDep = DllStructCreate("ubyte[" & Number($pServiceUser = 0) * ( Number($pDisplayName = 0) * $pEnd + $pDisplayName ) + $pServiceUser - $pDep & "]", $pDep) $sFull = BinaryToString( DllStructGetData($tDep, 1), 1 ) $sStrip = StringMid( $sFull, 1, StringInStr( $sFull, Chr(0) & Chr(0) ) - 1 ) If $sStrip <> "" Then Local $asSplit = StringSplit( $sStrip, Chr(0) ), $vDep[$asSplit[0]] For $i = 1 To $asSplit[0] $vDep[$i - 1] = $asSplit[$i] Next EndIf Return SetError($iQE, 0, $vDep) EndFunc ;==> _Service_QueryDependencies ; #FUNCTION# ======================================================================================================================================================= ; Name...........: _Service_QueryDesc ; Description ...: Retrieves the description of a service. ; Syntax.........: _Service_QueryDesc($sServiceName [, $sComputerName]) ; Parameters ....: $sServiceName - Name of the service. ; $sComputerName - [Optional] The name of the target computer. The local computer is default. ; Requirement(s).: None. ; Return values .: Success - The service's description. ; Failure - An empty string. ; Sets @error ; Author ........: engine ; Modified.......: ; Remarks .......: ; Related .......: ; Link ..........: ; Example .......: ; ================================================================================================================================================================== Func _Service_QueryDesc($sServiceName, $sComputerName = "") Local $hSC, $hService, $avQ2A, $tQ2B, $avQ2B, $iQ2E, $tQ2C, $pDesc, $sDesc $hSC = OpenSCManager($sComputerName, $SC_MANAGER_CONNECT) $hService = OpenService($hSC, $sServiceName, $SERVICE_QUERY_CONFIG) CloseServiceHandle($hSC) ; Determine needed size of the struct in bytes $avQ2A = DllCall( "advapi32.dll", "int", "QueryServiceConfig2", _ "hwnd", $hService, _ "dword", $SERVICE_CONFIG_DESCRIPTION, _ "ptr", 0, _ "dword", 0, _ "dword*", 0 ) ; Get Service data $tQ2B = DllStructCreate("ubyte[" & $avQ2A[5] & "]") $avQ2B = DllCall( "advapi32.dll", "int", "QueryServiceConfig2", _ "hwnd", $hService, _ "dword", $SERVICE_CONFIG_DESCRIPTION, _ "ptr", DllStructGetPtr($tQ2B), _ "dword", DllStructGetSize($tQ2B), _ "dword*", 0 ) ; Get last error and close service handle If $avQ2B[0] = 0 Then $iQ2E = GetLastError() CloseServiceHandle($hService) ; Decode the ubyte structure $tQ2C = DllStructCreate("uint_ptr", $avQ2B[3]) $pDesc = DllStructGetData($tQ2C, 1) If $pDesc > 0 Then Local $tDesc = DllStructCreate("char[" & $avQ2A[5] - DllStructGetSize($tQ2C) & "]", $pDesc) $sDesc = DllStructGetData($tDesc, 1) EndIf Return SetError($iQ2E, 0, $sDesc) EndFunc ;==> _Service_QueryDesc ; #FUNCTION# ======================================================================================================================================================= ; Name...........: _Service_QueryDisplayName ; Description ...: Retrieves the display name of a service. ; Syntax.........: _Service_QueryDisplayName($sServiceName [, $sComputerName]) ; Parameters ....: $sServiceName - Name of the service. ; $sComputerName - [Optional] The name of the target computer. The local computer is default. ; Requirement(s).: None. ; Return values .: Success - The service's display name. ; Failure - An empty string. ; Sets @error ; Author ........: engine ; Modified.......: ; Remarks .......: ; Related .......: ; Link ..........: ; Example .......: ; ================================================================================================================================================================== Func _Service_QueryDisplayName($sServiceName, $sComputerName = "") Local $hSC, $avSDA, $tSDB, $avSDB, $iSD $hSC = OpenSCManager($sComputerName, $SC_MANAGER_CONNECT) $avSDA = DllCall( "advapi32.dll", "int", "GetServiceDisplayName", _ "hwnd", $hSC, _ "str", $sServiceName, _ "ptr", 0, _ "dword*", 0 ) $tSDB = DllStructCreate("char[" & $avSDA[4] & "]") $avSDB = DllCall( "advapi32.dll", "int", "GetServiceDisplayName", _ "hwnd", $hSC, _ "str", $sServiceName, _ "ptr", DllStructGetPtr($tSDB), _ "dword*", $avSDA[4] ) If $avSDB[0] = 0 Then $iSD = GetLastError() CloseServiceHandle($hSC) Return SetError( $iSD, 0, DllStructGetData($tSDB, 1) ) EndFunc ;==> _Service_QueryDisplayName ; #FUNCTION# ======================================================================================================================================================= ; Name...........: _Service_QueryErrorControl ; Description ...: Retrieves the severity of the error, and action taken, if the given service fails to start. ; Syntax.........: _Service_QueryErrorControl($sServiceName [, $sComputerName]) ; Parameters ....: $sServiceName - Name of the service. ; $sComputerName - [Optional] The name of the target computer. The local computer is default. ; Requirement(s).: None. ; Return values .: Success - Returns the severity of the error, and action taken, if this service fails to start. Can be one of the following values: ; $SERVICE_ERROR_IGNORE - The startup program ignores the error and continues the startup operation. ; $SERVICE_ERROR_NORMAL - The startup program logs the error in the event log but continues the startup operation. ; $SERVICE_ERROR_SEVERE - The startup program logs the error in the event log. ; If the last-known-good configuration is being started, the startup operation continues. ; Otherwise, the system is restarted with the last-known-good configuration. ; $SERVICE_ERROR_CRITICAL - The startup program logs the error in the event log, if possible. ; If the last-known-good configuration is being started, the startup operation fails. ; Otherwise, the system is restarted with the last-known good configuration. ; Failure - 0 ; Sets @error ; Author ........: engine ; Modified.......: ; Remarks .......: ; Related .......: ; Link ..........: ; Example .......: ; ================================================================================================================================================================== Func _Service_QueryErrorControl($sServiceName, $sComputerName = "") Local $hSC, $hService, $avQA, $tQB, $avQB, $iQE, $tQC $hSC = OpenSCManager($sComputerName, $SC_MANAGER_CONNECT) $hService = OpenService($hSC, $sServiceName, $SERVICE_QUERY_CONFIG) CloseServiceHandle($hSC) ; Determine needed size of the struct in bytes $avQA = QueryServiceConfig($hService, 0, 0) ; Get Service data $tQB = DllStructCreate("ubyte[" & $avQA[4] & "]") $avQB = QueryServiceConfig( $hService, DllStructGetPtr($tQB), DllStructGetSize($tQB) ) ; Get last error and close service handle If $avQB[0] = 0 Then $iQE = GetLastError() CloseServiceHandle($hService) ; Decode the ubyte structure $tQC = DllStructCreate("dword[3];uint_ptr[2];dword;uint_ptr[3]", $avQB[2]) Return SetError( $iQE, 0, DllStructGetData($tQC, 1, 3) ) EndFunc ;==> _Service_QueryErrorControl ; #FUNCTION# ======================================================================================================================================================= ; Name...........: _Service_QueryFailureActions ; Description ...: Retrieves failure action settings of a service. ; Syntax.........: _Service_QueryFailureActions($sServiceName [, $sComputerName]) ; Parameters ....: $sServiceName - Name of the service. ; $sComputerName - [Optional] The name of the target computer. The local computer is default. ; Requirement(s).: None. ; Return values .: Success - An array where: ; $Array[0] - The time after which to reset the failure count to zero if there are no failures, in days. ; $Array[1] - The message to be broadcast to server users before rebooting in response to the $SC_ACTION_REBOOT service controller action. ; $Array[2] - The command line of the process for the CreateProcess function to execute in response to the ; $SC_ACTION_RUN_COMMAND service controller action. This process runs under the same account as the service. ; $Array[3] - An array of SC_ACTION_TYPE and respective delay in minutes. The array is of the form: ; $Array[n][2] = [[Type 1, Delay 1], [Type 2, Delay 2], ... [Type n, Delay n]] ; "Type" represents the action to be performed. It can be one of the following values from the SC_ACTION_TYPE enumeration type: ; $SC_ACTION_NONE - No action. ; $SC_ACTION_RESTART - Restart the service. ; $SC_ACTION_REBOOT - Reboot the computer. ; $SC_ACTION_RUN_COMMAND - Run a command. ; "Delay" represents the time to wait before performing the specified action, in minutes. ; Failure - Sets @error ; Author ........: engine ; The ANSI version was returning unexpected results. So I had to force the unicode version. ; Modified.......: ; Remarks .......: ; Related .......: ; Link ..........: ; Example .......: ; ================================================================================================================================================================== Func _Service_QueryFailureActions($sServiceName, $sComputerName = "") Local $hSC, $hService, $avQ2A, $tQ2B, $avQ2B, $iQ2E, $tQ2C, $pRebootMsg, $pCommand, $iActions, $pEnd, $sRebootMsg, $sCommand, $vActions, $avActions[4] $hSC = OpenSCManager($sComputerName, $SC_MANAGER_CONNECT) $hService = OpenService($hSC, $sServiceName, $SERVICE_QUERY_CONFIG) CloseServiceHandle($hSC) ; Determine needed size of the struct in bytes $avQ2A = DllCall( "advapi32.dll", "int", "QueryServiceConfig2W", _ "hwnd", $hService, _ "dword", $SERVICE_CONFIG_FAILURE_ACTIONS, _ "ptr", 0, _ "dword", 0, _ "dword*", 0 ) ; Get Service data $tQ2B = DllStructCreate("ubyte[" & $avQ2A[5] & "]") $avQ2B = DllCall( "advapi32.dll", "int", "QueryServiceConfig2W", _ "hwnd", $hService, _ "dword", $SERVICE_CONFIG_FAILURE_ACTIONS, _ "ptr", DllStructGetPtr($tQ2B), _ "dword", DllStructGetSize($tQ2B), _ "dword*", 0 ) ; Get last error and close service handle If $avQ2B[0] = 0 Then $iQ2E = GetLastError() CloseServiceHandle($hService) ; Decode the ubyte structure $tQ2C = DllStructCreate("dword;uint_ptr[2];dword;uint_ptr", $avQ2B[3]) $pRebootMsg = DllStructGetData($tQ2C, 2, 1) $pCommand = DllStructGetData($tQ2C, 2, 2) $iActions = DllStructGetData($tQ2C, 3) $pEnd = Execute($avQ2B[3] + $avQ2B[4]) If $pRebootMsg > 0 Then Local $tRebootMsg = DllStructCreate("wchar[" & ( Number($pCommand = 0) * $pEnd + $pCommand - $pRebootMsg ) / 2 - 1 & "]", $pRebootMsg) $sRebootMsg = DllStructGetData($tRebootMsg, 1) EndIf If $pCommand > 0 Then Local $tCommand = DllStructCreate("wchar[" & ($pEnd - $pCommand) / 2 - 1 & "]", $pCommand) $sCommand = DllStructGetData($tCommand, 1) EndIf If $iActions > 0 Then Local $tActions, $vActions[$iActions][2] $tActions = DllStructCreate( "dword[" & 2 * $iActions & "]", DllStructGetData($tQ2C, 4) ) For $i = 0 To $iActions - 1 $vActions[$i][0] = DllStructGetData($tActions, 1, 2 * $i + 1) $vActions[$i][1] = DllStructGetData($tActions, 1, 2 * $i + 2) / 6E+4 Next EndIf $avActions[0] = DllStructGetData($tQ2C, 1) / 86400 $avActions[1] = $sRebootMsg $avActions[2] = $sCommand $avActions[3] = $vActions Return SetError($iQ2E, 0, $avActions) EndFunc ;==> _Service_QueryFailureActions ; #FUNCTION# ======================================================================================================================================================= ; Name...........: _Service_QueryGroup ; Description ...: Retrieves the name of the load ordering group to which a service belongs. ; Syntax.........: _Service_QueryGroup($sServiceName [, $sComputerName]) ; Parameters ....: $sServiceName - Name of the service. ; $sComputerName - [Optional] The name of the target computer. The local computer is default. ; Requirement(s).: None. ; Return values .: Success - The name of the load ordering group to which the given service belongs. ; @extended stores the tag value for the service in the group returned. ; A value of zero indicates that the service has not been assigned a tag. ; Failure - An empty string. ; Sets @error ; Author ........: engine ; Modified.......: ; Remarks .......: ; Related .......: ; Link ..........: ; Example .......: ; ================================================================================================================================================================== Func _Service_QueryGroup($sServiceName, $sComputerName = "") Local $hSC, $hService, $avQA, $tQB, $avQB, $iQE, $tQC, $pGroup, $pDep, $pServiceUser, $pDisplayName, $pEnd, $p0, $p1, $p2, $sGroup $hSC = OpenSCManager($sComputerName, $SC_MANAGER_CONNECT) $hService = OpenService($hSC, $sServiceName, $SERVICE_QUERY_CONFIG) CloseServiceHandle($hSC) ; Determine needed size of the struct in bytes $avQA = QueryServiceConfig($hService, 0, 0) ; Get Service data $tQB = DllStructCreate("ubyte[" & $avQA[4] & "]") $avQB = QueryServiceConfig( $hService, DllStructGetPtr($tQB), DllStructGetSize($tQB) ) ; Get last error and close service handle If $avQB[0] = 0 Then $iQE = GetLastError() CloseServiceHandle($hService) ; Decode the ubyte structure $tQC = DllStructCreate("dword[3];uint_ptr[2];dword;uint_ptr[3]", $avQB[2]) $pGroup = DllStructGetData($tQC, 2, 2) $pDep = DllStructGetData($tQC, 4, 1) $pServiceUser = DllStructGetData($tQC, 4, 2) $pDisplayName = DllStructGetData($tQC, 4, 3) $pEnd = Execute($avQB[2] + $avQB[3]) $p0 = Number($pDisplayName = 0) * $pEnd + $pDisplayName $p1 = Number($pServiceUser = 0) * $p0 + $pServiceUser $p2 = Number($pDep = 0) * $p1 + $pDep If $pGroup > 0 Then Local $tGroup = DllStructCreate("char[" & $p2 - $pGroup & "]", $pGroup) $sGroup = DllStructGetData($tGroup, 1) EndIf Return SetError($iQE, DllStructGetData($tQC, 3), $sGroup) EndFunc ;==> _Service_QueryGroup ; #FUNCTION# ======================================================================================================================================================= ; Name...........: _Service_QueryStartType ; Description ...: Retrieves a service's start options. ; Syntax.........: _Service_QueryStartType($sServiceName [, $sComputerName]) ; Parameters ....: $sServiceName - Name of the service. ; $sComputerName - [Optional] The name of the target computer. The local computer is default. ; Requirement(s).: None. ; Return values .: Success - Returns the service start options. Can be one of the following values: ; $SERVICE_BOOT_START - A device driver started by the system loader. This value is valid only for driver services. ; $SERVICE_SYSTEM_START - A device driver started by the IoInitSystem function. This value is valid only for driver services. ; $SERVICE_AUTO_START - A service started automatically by the service control manager during system startup. ; $SERVICE_DEMAND_START - A service started by the service control manager when a process calls the StartService function. ; $SERVICE_DISABLED - A service that cannot be started. ; Failure - 0 ; Sets @error ; Author ........: engine ; Modified.......: ; Remarks .......: ; Related .......: ; Link ..........: ; Example .......: ; ================================================================================================================================================================== Func _Service_QueryStartType($sServiceName, $sComputerName = "") Local $hSC, $hService, $avQA, $tQB, $avQB, $iQE, $tQC $hSC = OpenSCManager($sComputerName, $SC_MANAGER_CONNECT) $hService = OpenService($hSC, $sServiceName, $SERVICE_QUERY_CONFIG) CloseServiceHandle($hSC) ; Determine needed size of the struct in bytes $avQA = QueryServiceConfig($hService, 0, 0) ; Get Service data $tQB = DllStructCreate("ubyte[" & $avQA[4] & "]") $avQB = QueryServiceConfig( $hService, DllStructGetPtr($tQB), DllStructGetSize($tQB) ) ; Get last error and close service handle If $avQB[0] = 0 Then $iQE = GetLastError() CloseServiceHandle($hService) ; Decode the ubyte structure $tQC = DllStructCreate("dword[3];uint_ptr[2];dword;uint_ptr[3]", $avQB[2]) Return SetError( $iQE, 0, DllStructGetData($tQC, 1, 2) ) EndFunc ;==> _Service_QueryStartType ; #FUNCTION# ======================================================================================================================================================= ; Name...........: _Service_QueryStatus ; Description ...: Retrieves the current status of the specified service. ; Syntax.........: _Service_QueryStatus($sServiceName [, $sComputerName]) ; Parameters ....: $sServiceName - Name of the service. ; $sComputerName - [Optional] The name of the target computer. The local computer is default. ; Requirement(s).: None. ; Return values .: Success - Returns an array as follows: ; $Array[0] - The type of service. Can be one of the following values: ; $SERVICE_KERNEL_DRIVER - The service is a device driver. ; $SERVICE_FILE_SYSTEM_DRIVER - The service is a file system driver. ; $SERVICE_WIN32_OWN_PROCESS - The service runs in its own process. ; $SERVICE_WIN32_SHARE_PROCESS - The service shares a process with other services. ; BitOR($SERVICE_WIN32_OWN_PROCESS, $SERVICE_INTERACTIVE_PROCESS) - The service runs in its own process ; and can interact with the desktop. ; BitOR($SERVICE_WIN32_SHARE_PROCESS, $SERVICE_INTERACTIVE_PROCESS) - The service shares a process with other services ; and can interact with the desktop. ; $Array[1] - The current state of the service. Can be one of the following values: ; $SERVICE_STOPPED - The service has stopped. ; $SERVICE_START_PENDING - The service is starting. ; $SERVICE_STOP_PENDING - The service is stopping. ; $SERVICE_RUNNING - The service is running. ; $SERVICE_CONTINUE_PENDING - The service is about to continue. ; $SERVICE_PAUSE_PENDING - The service is pausing. ; $SERVICE_PAUSED - The service is paused. ; $Array[2] - The control codes the service accepts and processes in its handler function (see Handler and HandlerEx). ; A user interface process can control a service by specifying a control command in the ControlService or ControlServiceEx ; function. By default, all services accept the $SERVICE_CONTROL_INTERROGATE value. Can be one of the following values: ; $SERVICE_ACCEPT_STOP - The service can be stopped. ; $SERVICE_ACCEPT_PAUSE_CONTINUE - The service can be paused and continued. ; $SERVICE_ACCEPT_SHUTDOWN - The service is notified when system shutdown occurs. ; $SERVICE_ACCEPT_PARAMCHANGE - The service can reread its startup parameters without being stopped and restarted. ; $SERVICE_ACCEPT_NETBINDCHANGE - The service is a network component that can accept changes ; in its binding without being stopped and restarted. ; $SERVICE_ACCEPT_HARDWAREPROFILECHANGE - The service is notified when the computer's hardware profile has changed. ; $SERVICE_ACCEPT_POWEREVENT - The service is notified when the computer's power status has changed. ; $SERVICE_ACCEPT_SESSIONCHANGE - The service is notified when the computer's session status has changed. ; $SERVICE_ACCEPT_PRESHUTDOWN - The service can perform preshutdown tasks. ; $Array[3] - The error code that the service uses to report an error that occurs when it is starting or stopping. ; To return an error code specific to the service, the service must set this value to $ERROR_SERVICE_SPECIFIC_ERROR ; to indicate that the next element ($Array[4]) stores the error code. ; The service should set this value to $NO_ERROR when it is running and when it terminates normally. ; $Array[4] - The service-specific error code that the service returns when an error occurs while the service is ; starting or stopping. This value is ignored unless the previous element ($Array[3]) reports $ERROR_SERVICE_SPECIFIC_ERROR. ; $Array[5] - The check-point value that the service increments periodically to report its progress during a lengthy start, ; stop, pause, or continue operation. ; For example, the service should increment this value as it completes each step of its initialization when it is starting up. ; The user interface program that invoked the operation on the service uses this value to track the progress ; of the service during a lengthy operation. ; This value is not valid and should be zero when the service does not have a start, stop, pause, or continue operation pending. ; $Array[6] - The estimated time required for a pending start, stop, pause, or continue operation, in milliseconds. ; $Array[7] - The process identifier of the service (PID). ; $Array[8] - Can be one of the following values: ; 0 - The service is running in a process that is not a system process, or it is not running. ; $SERVICE_RUNS_IN_SYSTEM_PROCESS - The service runs in a system process that must always be running. ; Failure - Sets @error ; Author ........: engine ; Modified.......: ; Remarks .......: ; Related .......: ; Link ..........: ; Example .......: ; ================================================================================================================================================================== Func _Service_QueryStatus($sServiceName, $sComputerName = "") Local $hSC, $hService, $tSERVICE_STATUS_PROCESS, $avQSSE, $iQSSE, $aiStatus[9] $hSC = OpenSCManager($sComputerName, $SC_MANAGER_CONNECT) $hService = OpenService($hSC, $sServiceName, $SERVICE_QUERY_STATUS) CloseServiceHandle($hSC) $tSERVICE_STATUS_PROCESS = DllStructCreate("dword[9]") $avQSSE = DllCall( "advapi32.dll", "int", "QueryServiceStatusEx", _ "hwnd", $hService, _ "dword", $SC_STATUS_PROCESS_INFO, _ "ptr", DllStructGetPtr($tSERVICE_STATUS_PROCESS), _ "dword", DllStructGetSize($tSERVICE_STATUS_PROCESS), _ "dword*", 0 ) If $avQSSE[0] = 0 Then $iQSSE = GetLastError() CloseServiceHandle($hService) For $i = 0 To 8 $aiStatus[$i] = DllStructGetData($tSERVICE_STATUS_PROCESS, 1, $i + 1) Next Return SetError($iQSSE, 0, $aiStatus) EndFunc ;==> _Service_QueryStatus ; #FUNCTION# ======================================================================================================================================================= ; Name...........: _Service_QueryType ; Description ...: Retrieves a service's type. ; Syntax.........: _Service_QueryType($sServiceName [, $sComputerName]) ; Parameters ....: $sServiceName - Name of the service. ; $sComputerName - [Optional] The name of the target computer. The local computer is default. ; Requirement(s).: None. ; Return values .: Success - Returns the type of service. Can be one of the following values: ; $SERVICE_KERNEL_DRIVER - The service is a device driver. ; $SERVICE_FILE_SYSTEM_DRIVER - The service is a file system driver. ; $SERVICE_WIN32_OWN_PROCESS - The service runs in its own process. ; $SERVICE_WIN32_SHARE_PROCESS - The service shares a process with other services. ; BitOR($SERVICE_WIN32_OWN_PROCESS, $SERVICE_INTERACTIVE_PROCESS) - The service runs in its own process ; and can interact with the desktop. ; BitOR($SERVICE_WIN32_SHARE_PROCESS, $SERVICE_INTERACTIVE_PROCESS) - The service shares a process with other services ; and can interact with the desktop. ; Failure - 0 ; Sets @error ; Author ........: engine ; Modified.......: ; Remarks .......: ; Related .......: ; Link ..........: ; Example .......: ; ================================================================================================================================================================== Func _Service_QueryType($sServiceName, $sComputerName = "") Local $hSC, $hService, $avQA, $tQB, $avQB, $iQE, $tQC $hSC = OpenSCManager($sComputerName, $SC_MANAGER_CONNECT) $hService = OpenService($hSC, $sServiceName, $SERVICE_QUERY_CONFIG) CloseServiceHandle($hSC) ; Determine needed size of the struct in bytes $avQA = QueryServiceConfig($hService, 0, 0) ; Get Service data $tQB = DllStructCreate("ubyte[" & $avQA[4] & "]") $avQB = QueryServiceConfig( $hService, DllStructGetPtr($tQB), DllStructGetSize($tQB) ) ; Get last error and close service handle If $avQB[0] = 0 Then $iQE = GetLastError() CloseServiceHandle($hService) ; Decode the ubyte structure $tQC = DllStructCreate("dword[3];uint_ptr[2];dword;uint_ptr[3]", $avQB[2]) Return SetError( $iQE, 0, DllStructGetData($tQC, 1, 1) ) EndFunc ;==> _Service_QueryType ; #FUNCTION# ======================================================================================================================================================= ; Name...........: _Service_SetAccount ; Description ...: Sets or changes a service's account and password. ; Syntax.........: _Service_SetAccount($sServiceName, $sServiceUser [, $sPassword, $sComputerName]) ; Parameters ....: $sServiceName - Name of the service. ; $sServiceUser - The name of the account under which the service should run. Specify "Default" if you are not changing the existing account name. ; If the service type is $SERVICE_WIN32_OWN_PROCESS, use an account name in the form DomainName\UserName. ; The service process will be logged on as this user. If the account belongs to the built-in domain, ; you can specify .\UserName . A shared process can run as any user. ; If the service type is $SERVICE_KERNEL_DRIVER or $SERVICE_FILE_SYSTEM_DRIVER, ; the name is the driver object name that the system uses to load the device driver. ; Specify "Default" if the driver is to use a default object name created by the I/O system. ; $sPassword - [Optional] The password to the account name specified by the $sServiceUser parameter. ; Specify "Default" if you are not changing the existing password. ; Specify an empty string if the account has no password or if the service runs in the LocalService, NetworkService, ; or LocalSystem account. Passwords are ignored for driver services. ; $sComputerName - [Optional] The name of the target computer. The local computer is default. ; Requirement(s).: Administrative rights on the target computer. ; Return values .: Success - 1 ; Failure - 0 ; Sets @error ; Author ........: engine ; Modified.......: ; Remarks .......: ; Related .......: ; Link ..........: ; Example .......: ; ================================================================================================================================================================== Func _Service_SetAccount($sServiceName, $sServiceUser, $sPassword = Default, $sComputerName = "") Local $tServiceUser, $tPassword, $hSC, $hService, $iSSP, $iSSPE $tServiceUser = DllStructCreate("char[" & Number($sServiceUser <> Default) * ( StringLen($sServiceUser) + 1 ) & "]") DllStructSetData($tServiceUser, 1, $sServiceUser) $tPassword = DllStructCreate("char[" & Number($sPassword <> Default) * ( StringLen($sPassword) + 1 ) & "]") DllStructSetData($tPassword, 1, $sPassword) $hSC = OpenSCManager($sComputerName, $SC_MANAGER_CONNECT) $hService = OpenService($hSC, $sServiceName, $SERVICE_CHANGE_CONFIG) CloseServiceHandle($hSC) $iSSP = ChangeServiceConfig( $hService, _ $SERVICE_NO_CHANGE, _ $SERVICE_NO_CHANGE, _ $SERVICE_NO_CHANGE, _ 0, 0, 0, 0, _ DllStructGetPtr($tServiceUser), _ DllStructGetPtr($tPassword), _ 0 ) If $iSSP = 0 Then $iSSPE = GetLastError() CloseServiceHandle($hService) Return SetError($iSSPE, 0, $iSSP) EndFunc ;==> _Service_SetAccount ; #FUNCTION# ======================================================================================================================================================= ; Name...........: _Service_SetBinaryPath ; Description ...: Sets or changes the path to the service binary file. ; Syntax.........: _Service_SetBinaryPath($sServiceName, $sBinaryPath [, $sComputerName]) ; Parameters ....: $sServiceName - Name of the service. ; $sBinaryPath - The fully-qualified path to the service binary file. ; If the path contains a space, it must be quoted so that it is correctly interpreted. ; For example, "d:\\my share\\myservice.exe" should be specified as "\"d:\\my share\\myservice.exe\"". ; The path can also include arguments for an auto-start service. For example, "d:\\myshare\\myservice.exe arg1 arg2". ; These arguments are passed to the service entry point (typically the main function). ; $sComputerName - [Optional] The name of the target computer. The local computer is default. ; Requirement(s).: Administrative rights on the target computer. ; Return values .: Success - 1 ; Failure - 0 ; Sets @error ; Author ........: engine ; Modified.......: ; Remarks .......: ; Related .......: ; Link ..........: ; Example .......: ; ================================================================================================================================================================== Func _Service_SetBinaryPath($sServiceName, $sBinaryPath, $sComputerName = "") Local $tBinaryPath, $hSC, $hService, $iSCh, $iSChE $tBinaryPath = DllStructCreate("char[" & StringLen($sBinaryPath) + 1 & "]") DllStructSetData($tBinaryPath, 1, $sBinaryPath) $hSC = OpenSCManager($sComputerName, $SC_MANAGER_CONNECT) $hService = OpenService($hSC, $sServiceName, $SERVICE_CHANGE_CONFIG) CloseServiceHandle($hSC) $iSCh = ChangeServiceConfig( $hService, _ $SERVICE_NO_CHANGE, _ $SERVICE_NO_CHANGE, _ $SERVICE_NO_CHANGE, _ DllStructGetPtr($tBinaryPath), _ 0, 0, 0, 0, 0, 0 ) If $iSCh = 0 Then $iSChE = GetLastError() CloseServiceHandle($hService) Return SetError($iSChE, 0, $iSCh) EndFunc ;==> _Service_SetBinaryPath ; #FUNCTION# ======================================================================================================================================================= ; Name...........: _Service_SetDependencies ; Description ...: Sets or changes a service's dependencies. ; Syntax.........: _Service_SetDependencies($sServiceName, $vDependencies [, $sComputerName]) ; Parameters ....: $sServiceName - Name of the service. ; $vDependencies - An array of services or load ordering groups that the system must start before this service can be started. ; (Dependency on a group means that this service can run if at least one member of the group is running after an attempt to ; start all members of the group.) Specify an empty string if the service has no dependencies. ; You must prefix group names with a plus sign ("+") so that they can be distinguished from a service name, ; because services and service groups share the same name space. ; $sComputerName - [Optional] The name of the target computer. The local computer is default. ; Requirement(s).: Administrative rights on the target computer. ; Return values .: Success - 1 ; Failure - 0 ; Sets @error ; Author ........: engine ; Modified.......: ; Remarks .......: ; Related .......: ; Link ..........: ; Example .......: ; ================================================================================================================================================================== Func _Service_SetDependencies($sServiceName, $vDependencies, $sComputerName = "") Local $iDepend, $tagDepend, $tDepend, $hSC, $hService, $iSSD, $iSSDE If IsArray($vDependencies) Then Local $asDepend = $vDependencies Else Local $asDepend[1] = [$vDependencies] EndIf $iDepend = UBound($asDepend) - 1 For $i = 0 To $iDepend $tagDepend &= "char[" & StringLen($asDepend[$i]) + 1 & "];" Next $tDepend = DllStructCreate( StringTrimRight($tagDepend, 1) ) For $i = 0 To $iDepend DllStructSetData($tDepend, $i + 1, $asDepend[$i]) Next $hSC = OpenSCManager($sComputerName, $SC_MANAGER_CONNECT) $hService = OpenService($hSC, $sServiceName, $SERVICE_CHANGE_CONFIG) CloseServiceHandle($hSC) $iSSD = ChangeServiceConfig( $hService, _ $SERVICE_NO_CHANGE, _ $SERVICE_NO_CHANGE, _ $SERVICE_NO_CHANGE, _ 0, 0, 0, _ DllStructGetPtr($tDepend), _ 0, 0, 0 ) If $iSSD = 0 Then $iSSDE = GetLastError() CloseServiceHandle($hService) Return SetError($iSSDE, 0, $iSSD) EndFunc ;==> _Service_SetDependencies ; #FUNCTION# ======================================================================================================================================================= ; Name...........: _Service_SetDesc ; Description ...: Sets or changes a service's description. ; Syntax.........: _Service_SetDesc($sServiceName, $sDescription [, $sComputerName]) ; Parameters ....: $sServiceName - Name of the service. ; $sDescription - The description of the service. ; $sComputerName - [Optional] The name of the target computer. The local computer is default. ; Requirement(s).: Administrative rights on the target computer. ; Return values .: Success - 1 ; Failure - 0 ; Sets @error ; Author ........: engine ; Modified.......: ; Remarks .......: ; Related .......: ; Link ..........: ; Example .......: ; ================================================================================================================================================================== Func _Service_SetDesc($sServiceName, $sDescription, $sComputerName = "") Local $hSC, $hService, $avCSC2, $iCSC2 $hSC = OpenSCManager($sComputerName, $SC_MANAGER_CONNECT) $hService = OpenService($hSC, $sServiceName, $SERVICE_CHANGE_CONFIG) CloseServiceHandle($hSC) $avCSC2 = DllCall( "advapi32.dll", "int", "ChangeServiceConfig2", _ "hwnd", $hService, _ "dword", $SERVICE_CONFIG_DESCRIPTION, _ "str*", $sDescription ) If $avCSC2[0] = 0 Then $iCSC2 = GetLastError() CloseServiceHandle($hService) Return SetError($iCSC2, 0, $avCSC2[0]) EndFunc ;==> _Service_SetDesc ; #FUNCTION# ======================================================================================================================================================= ; Name...........: _Service_SetDisplayName ; Description ...: Sets or changes the display name of a service. ; Syntax.........: _Service_SetDisplayName($sServiceName, $sDisplayName [, $sComputerName]) ; Parameters ....: $sServiceName - Name of the service. ; $sDisplayName - The display name to be used by user interface programs to identify the service. The maximum string length is 256 characters. ; The service control manager database preserves the case of the characters, ; but service name comparisons are always case insensitive. ; Forward-slash (/) and back-slash (\) are invalid service name characters. ; $sComputerName - [Optional] The name of the target computer. The local computer is default. ; Requirement(s).: Administrative rights on the target computer. ; Return values .: Success - 1 ; Failure - 0 ; Sets @error ; Author ........: engine ; Modified.......: ; Remarks .......: ; Related .......: ; Link ..........: ; Example .......: ; ================================================================================================================================================================== Func _Service_SetDisplayName($sServiceName, $sDisplayName, $sComputerName = "") Local $tDisplayName, $hSC, $hService, $iSCh, $iSChE $tDisplayName = DllStructCreate("char[" & StringLen($sDisplayName) + 1 & "]") DllStructSetData($tDisplayName, 1, $sDisplayName) $hSC = OpenSCManager($sComputerName, $SC_MANAGER_CONNECT) $hService = OpenService($hSC, $sServiceName, $SERVICE_CHANGE_CONFIG) CloseServiceHandle($hSC) $iSCh = ChangeServiceConfig( $hService, _ $SERVICE_NO_CHANGE, _ $SERVICE_NO_CHANGE, _ $SERVICE_NO_CHANGE, _ 0, 0, 0, 0, 0, 0, _ DllStructGetPtr($tDisplayName) ) If $iSCh = 0 Then $iSChE = GetLastError() CloseServiceHandle($hService) Return SetError($iSChE, 0, $iSCh) EndFunc ;==> _Service_SetDisplayName ; #FUNCTION# ======================================================================================================================================================= ; Name...........: _Service_SetErrorControl ; Description ...: Sets or changes a service's error control. ; Syntax.........: _Service_SetErrorControl($sServiceName, $iErrorControl [, $sComputerName]) ; Parameters ....: $sServiceName - Name of the service. ; $iErrorControl - The severity of the error, and action taken, if this service fails to start. Specify one of the following values: ; $SERVICE_ERROR_IGNORE - The startup program ignores the error and continues the startup operation. ; $SERVICE_ERROR_NORMAL - The startup program logs the error in the event log but continues the startup operation. ; $SERVICE_ERROR_SEVERE - The startup program logs the error in the event log. ; If the last-known-good configuration is being started, the startup operation continues. ; Otherwise, the system is restarted with the last-known-good configuration. ; $SERVICE_ERROR_CRITICAL - The startup program logs the error in the event log, if possible. ; If the last-known-good configuration is being started, the startup operation fails. ; Otherwise, the system is restarted with the last-known good configuration. ; $sComputerName - [Optional] The name of the target computer. The local computer is default. ; Requirement(s).: Administrative rights on the target computer. ; Return values .: Success - 1 ; Failure - 0 ; Sets @error ; Author ........: engine ; Modified.......: ; Remarks .......: ; Related .......: ; Link ..........: ; Example .......: ; ================================================================================================================================================================== Func _Service_SetErrorControl($sServiceName, $iErrorControl, $sComputerName = "") Local $hSC, $hService, $iSEC, $iSECE $hSC = OpenSCManager($sComputerName, $SC_MANAGER_CONNECT) $hService = OpenService($hSC, $sServiceName, $SERVICE_CHANGE_CONFIG) CloseServiceHandle($hSC) $iSEC = ChangeServiceConfig( $hService, _ $SERVICE_NO_CHANGE, _ $SERVICE_NO_CHANGE, _ $iErrorControl, _ 0, 0, 0, 0, 0, 0, 0 ) If $iSEC = 0 Then $iSECE = GetLastError() CloseServiceHandle($hService) Return SetError($iSECE, 0, $iSEC) EndFunc ;==> _Service_SetErrorControl ; #FUNCTION# ======================================================================================================================================================= ; Name...........: _Service_SetFailureActions ; Description ...: Sets or changes service failure action settings. ; Syntax.........: _Service_SetFailureActions($sServiceName, $iResetPeriod [, $sRebootMsg, $sCommand, $aiActions, $sComputerName]) ; Parameters ....: $sServiceName - Name of the service. ; $iResetPeriod - The time after which to reset the failure count to zero if there are no failures, in days. ; $sRebootMsg - [Optional] The message to be broadcast to server users before rebooting in response to the $SC_ACTION_REBOOT ; service controller action. ; If this value is "Default", the reboot message is unchanged. If the value is an empty string (""), ; the reboot message is deleted and no message is broadcast. ; $sCommand - [Optional] The command line of the process for the CreateProcess function to execute in response to the ; $SC_ACTION_RUN_COMMAND service controller action. This process runs under the same account as the service. ; If this value is "Default", the command is unchanged. If the value is an empty string (""), ; the command is deleted and no program is run when the service fails. ; $aiActions - [Optional] An array of SC_ACTION_TYPE and respective delay in minutes. The array must be of the form: ; $Array[n][2] = [[Type 1, Delay 1], [Type 2, Delay 2], ... [Type n, Delay n]] ; "Type" represents the action to be performed. It can be one of the following values from the SC_ACTION_TYPE enumeration type: ; $SC_ACTION_NONE - No action. ; $SC_ACTION_RESTART - Restart the service. ; $SC_ACTION_REBOOT - Reboot the computer. ; $SC_ACTION_RUN_COMMAND - Run a command. ; "Delay" represents the time to wait before performing the specified action, in minutes. ; If this parameter is "Default", the service's actions remain unchanged. If the parameter is an empty string (""), ; the service's actions are deleted. ; $sComputerName - [Optional] The name of the target computer. The local computer is default. ; Requirement(s).: Administrative rights on the target computer. ; Return values .: Success - 1 ; Failure - 0 ; Sets @error ; Author ........: engine ; Modified.......: ; Remarks .......: ; Related .......: ; Link ..........: ; Example .......: $Service = "ALG" ; $ResetPeriod = 1 ; $RebootMsg = "System is going to reboot now." ; $Command = @SystemDir & "\alg.exe /?" ; Dim $aiActions[3][2] = [[$SC_ACTION_RUN_COMMAND, 1], [$SC_ACTION_RESTART, 1], [$SC_ACTION_REBOOT, 1]] ; $iResult = _Service_SetFailureActions($Service, $ResetPeriod, $RebootMsg, $Command, $aiActions) ; MsgBox(0, "", $iResult & @CRLF & @error) ; ================================================================================================================================================================== Func _Service_SetFailureActions($sServiceName, $iResetPeriod, $sRebootMsg = Default, $sCommand = Default, $aiActions = Default, $sComputerName = "") Local $tRebootMsg, $tCommand, $iDim, $iActions, $tSC_ACTION, $tSERVICE_FAILURE_ACTIONS, $hSC, $hService, $avPrev, $avCSC2, $iCSC2 $tRebootMsg = DllStructCreate("char[" & Number($sRebootMsg <> Default) * ( StringLen($sRebootMsg) + 1 ) & "]") DllStructSetData($tRebootMsg, 1, $sRebootMsg) $tCommand = DllStructCreate("char[" & Number($sCommand <> Default) * ( StringLen($sCommand) + 1 ) & "]") DllStructSetData($tCommand, 1, $sCommand) $iDim = UBound($aiActions, 0) While 1 If $aiActions = Default Or $aiActions = "" Then ExitLoop If Not ( $iDim <= 2 And UBound($aiActions, $iDim) = 2 ) Then Return SetError(-1, 0, 0) ExitLoop WEnd If $iDim = 1 Then Local $aiTemp[1][2] $aiTemp[0][0] = $aiActions[0] $aiTemp[0][1] = $aiActions[1] $aiActions = $aiTemp $aiTemp = 0 EndIf $iActions = UBound($aiActions, 1) $tSC_ACTION = DllStructCreate("dword[" & 2 * ( $iActions + Number($aiActions = "") ) & "]") For $i = 0 To $iActions - 1 DllStructSetData($tSC_ACTION, 1, $aiActions[$i][0], 2 * $i + 1) DllStructSetData($tSC_ACTION, 1, $aiActions[$i][1] * 6E+4, 2 * $i + 2) Next $tSERVICE_FAILURE_ACTIONS = DllStructCreate("dword;uint_ptr[2];dword;uint_ptr") DllStructSetData($tSERVICE_FAILURE_ACTIONS, 1, $iResetPeriod * 86400) DllStructSetData($tSERVICE_FAILURE_ACTIONS, 2, DllStructGetPtr($tRebootMsg), 1) DllStructSetData($tSERVICE_FAILURE_ACTIONS, 2, DllStructGetPtr($tCommand), 2) DllStructSetData($tSERVICE_FAILURE_ACTIONS, 3, $iActions) DllStructSetData( $tSERVICE_FAILURE_ACTIONS, 4, DllStructGetPtr($tSC_ACTION) ) $hSC = OpenSCManager($sComputerName, $SC_MANAGER_CONNECT) $hService = OpenService( $hSC, $sServiceName, BitOR($SERVICE_CHANGE_CONFIG, $SERVICE_START) ) CloseServiceHandle($hSC) Local $avCurr[2] = [$SE_SHUTDOWN_NAME, $SE_PRIVILEGE_ENABLED] $avPrev = _SetPrivilege($avCurr) $avCSC2 = DllCall( "advapi32.dll", "int", "ChangeServiceConfig2", _ "hwnd", $hService, _ "dword", $SERVICE_CONFIG_FAILURE_ACTIONS, _ "ptr", DllStructGetPtr($tSERVICE_FAILURE_ACTIONS) ) If $avCSC2[0] = 0 Then $iCSC2 = GetLastError() _SetPrivilege($avPrev) CloseServiceHandle($hService) Return SetError($iCSC2, 0, $avCSC2[0]) EndFunc ;==> _Service_SetFailureActions ; #FUNCTION# ======================================================================================================================================================= ; Name...........: _Service_SetGroup ; Description ...: Sets or changes the load ordering group of which a service is member. ; Syntax.........: _Service_SetGroup($sServiceName, $sLoadOrderGroup [, $fTagId, $sComputerName]) ; Parameters ....: $sServiceName - Name of the service. ; $sLoadOrderGroup - The name of the load ordering group of which this service is a member. ; Specify an empty string if the service does not belong to a group. ; $fTagId - [Optional] Specify "True" if you desire a tag value that is unique in the group specified in the $sLoadOrderGroup parameter. ; Specify "False" or "Default" if you are not changing the existing tag. This is the default. ; The tag value is stored in @extended macro. ; You can use a tag for ordering service startup within a load ordering group by specifying a tag order vector in the ; GroupOrderList value of the following registry key: ; HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control ; Tags are only evaluated for driver services that have $SERVICE_BOOT_START or $SERVICE_SYSTEM_START start types. ; $sComputerName - [Optional] The name of the target computer. The local computer is default. ; Requirement(s).: Administrative rights on the target computer. ; Return values .: Success - 1 ; Failure - 0 ; Sets @error ; Author ........: engine ; Modified.......: ; Remarks .......: ; Related .......: ; Link ..........: ; Example .......: ; ================================================================================================================================================================== Func _Service_SetGroup($sServiceName, $sLoadOrderGroup, $fTagId = False, $sComputerName = "") Local $tLoadOrderGroup, $tTagId, $hSC, $hService, $iSSG, $iSSGE $tLoadOrderGroup = DllStructCreate("char[" & StringLen($sLoadOrderGroup) + 1 & "]") DllStructSetData($tLoadOrderGroup, 1, $sLoadOrderGroup) $tTagId = DllStructCreate("dword[" & Number($fTagId) & "]") $hSC = OpenSCManager($sComputerName, $SC_MANAGER_CONNECT) $hService = OpenService($hSC, $sServiceName, $SERVICE_CHANGE_CONFIG) CloseServiceHandle($hSC) $iSSG = ChangeServiceConfig( $hService, _ $SERVICE_NO_CHANGE, _ $SERVICE_NO_CHANGE, _ $SERVICE_NO_CHANGE, _ 0, _ DllStructGetPtr($tLoadOrderGroup), _ DllStructGetPtr($tTagId), _ 0, 0, 0, 0 ) If $iSSG = 0 Then $iSSGE = GetLastError() CloseServiceHandle($hService) Return SetError($iSSGE, DllStructGetData($tTagId, 1), $iSSG) EndFunc ;==> _Service_SetGroup ; #FUNCTION# ======================================================================================================================================================= ; Name...........: _Service_SetStartType ; Description ...: Sets or changes a service's start type. ; Syntax.........: _Service_SetStartType($sServiceName, $iStartType [, $sComputerName]) ; Parameters ....: $sServiceName - Name of the service. ; $iStartType - The service start options. Specify one of the following values: ; $SERVICE_BOOT_START - A device driver started by the system loader. This value is valid only for driver services. ; $SERVICE_SYSTEM_START - A device driver started by the IoInitSystem function. This value is valid only for driver services. ; $SERVICE_AUTO_START - A service started automatically by the service control manager during system startup. ; $SERVICE_DEMAND_START - A service started by the service control manager when a process calls the StartService function. ; $SERVICE_DISABLED - A service that cannot be started. ; $sComputerName - [Optional] The name of the target computer. The local computer is default. ; Requirement(s).: Administrative rights on the target computer. ; Return values .: Success - 1 ; Failure - 0 ; Sets @error ; Author ........: engine ; Modified.......: ; Remarks .......: ; Related .......: ; Link ..........: ; Example .......: ; ================================================================================================================================================================== Func _Service_SetStartType($sServiceName, $iStartType, $sComputerName = "") Local $hSC, $hService, $iSSM, $iSSME $hSC = OpenSCManager($sComputerName, $SC_MANAGER_CONNECT) $hService = OpenService($hSC, $sServiceName, $SERVICE_CHANGE_CONFIG) CloseServiceHandle($hSC) $iSSM = ChangeServiceConfig( $hService, _ $SERVICE_NO_CHANGE, _ $iStartType, _ $SERVICE_NO_CHANGE, _ 0, 0, 0, 0, 0, 0, 0 ) If $iSSM = 0 Then $iSSME = GetLastError() CloseServiceHandle($hService) Return SetError($iSSME, 0, $iSSM) EndFunc ;==> _Service_SetStartType ; #FUNCTION# ======================================================================================================================================================= ; Name...........: _Service_SetType ; Description ...: Sets or changes the type of service. ; Syntax.........: _Service_SetType($sServiceName, $iServiceType [, $sComputerName]) ; Parameters ....: $sServiceName - Name of the service. ; $iServiceType - The type of service. Specify one of the following service types: ; $SERVICE_KERNEL_DRIVER - Driver service. ; $SERVICE_FILE_SYSTEM_DRIVER - File system driver service. ; $SERVICE_WIN32_OWN_PROCESS - Service that runs in its own process. ; $SERVICE_WIN32_SHARE_PROCESS - Service that shares a process with other services. ; If you specify either $SERVICE_WIN32_OWN_PROCESS or $SERVICE_WIN32_SHARE_PROCESS, ; and the service is running in the context of the LocalSystem account, you can also specify the following type: ; $SERVICE_INTERACTIVE_PROCESS - The service can interact with the desktop. ; $sComputerName - [Optional] The name of the target computer. The local computer is default. ; Requirement(s).: Administrative rights on the target computer. ; Return values .: Success - 1 ; Failure - 0 ; Sets @error ; Author ........: engine ; Modified.......: ; Remarks .......: ; Related .......: ; Link ..........: ; Example .......: ; ================================================================================================================================================================== Func _Service_SetType($sServiceName, $iServiceType, $sComputerName = "") Local $hSC, $hService, $iSST, $iSSTE $hSC = OpenSCManager($sComputerName, $SC_MANAGER_CONNECT) $hService = OpenService($hSC, $sServiceName, $SERVICE_CHANGE_CONFIG) CloseServiceHandle($hSC) $iSST = ChangeServiceConfig( $hService, _ $iServiceType, _ $SERVICE_NO_CHANGE, _ $SERVICE_NO_CHANGE, _ 0, 0, 0, 0, 0, 0, 0 ) If $iSST = 0 Then $iSSTE = GetLastError() CloseServiceHandle($hService) Return SetError($iSSTE, 0, $iSST) EndFunc ;==> _Service_SetType ; #FUNCTION# ======================================================================================================================================================= ; Name...........: _Service_Start ; Description ...: Starts a service. ; Syntax.........: _Service_Start($sServiceName [, $sComputerName]) ; Parameters ....: $sServiceName - Name of the service. ; $sComputerName - [Optional] The name of the target computer. The local computer is default. ; Requirement(s).: Administrative rights on the target computer. ; Return values .: Success - 1 ; Failure - 0 ; Sets @error ; Author ........: engine ; Modified.......: ; Remarks .......: ; Related .......: ; Link ..........: ; Example .......: ; ================================================================================================================================================================== Func _Service_Start($sServiceName, $sComputerName = "") Local $hSC, $hService, $avSS, $iSS $hSC = OpenSCManager($sComputerName, $SC_MANAGER_CONNECT) $hService = OpenService($hSC, $sServiceName, $SERVICE_START) CloseServiceHandle($hSC) $avSS = DllCall( "advapi32.dll", "int", "StartService", _ "hwnd", $hService, _ "dword", 0, _ "ptr", 0 ) If $avSS[0] = 0 Then $iSS = GetLastError() CloseServiceHandle($hService) Return SetError($iSS, 0, $avSS[0]) EndFunc ;==> _Service_Start ; #FUNCTION# ======================================================================================================================================================= ; Name...........: _Service_Stop ; Description ...: Stops a service. ; Syntax.........: _Service_Stop($sServiceName [, $sComputerName]) ; Parameters ....: $sServiceName - Name of the service. ; $sComputerName - [Optional] The name of the target computer. The local computer is default. ; Requirement(s).: Administrative rights on the target computer. ; Return values .: Success - 1 ; Failure - 0 ; Sets @error ; Author ........: engine ; Modified.......: ; Remarks .......: ; Related .......: ; Link ..........: ; Example .......: ; ================================================================================================================================================================== Func _Service_Stop($sServiceName, $sComputerName = "") Local $hSC, $hService, $iCSS, $iCSSE $hSC = OpenSCManager($sComputerName, $SC_MANAGER_CONNECT) $hService = OpenService($hSC, $sServiceName, $SERVICE_STOP) CloseServiceHandle($hSC) $iCSS = ControlService($hService, $SERVICE_CONTROL_STOP) If $iCSS = 0 Then $iCSSE = GetLastError() CloseServiceHandle($hService) Return SetError($iCSSE, 0, $iCSS) EndFunc ;==> _Service_Stop Func ChangeServiceConfig( $hService, _ $iServiceType, _ $iStartType, _ $iErrorType, _ $pBinaryPath, _ $pLoadOrderGroup, _ $pTagId, _ $pDependencies, _ $pServiceUser, _ $pPassword, _ $pDisplayName ) Local $avCSC = DllCall( "advapi32.dll", "int", "ChangeServiceConfig", _ "hwnd", $hService, _ "dword", $iServiceType, _ "dword", $iStartType, _ "dword", $iErrorType, _ "ptr", $pBinaryPath, _ "ptr", $pLoadOrderGroup, _ "ptr", $pTagId, _ "ptr", $pDependencies, _ "ptr", $pServiceUser, _ "ptr", $pPassword, _ "ptr", $pDisplayName ) Return $avCSC[0] EndFunc ;==> ChangeServiceConfig Func CloseServiceHandle($hSCObject) Local $avCSH = DllCall( "advapi32.dll", "int", "CloseServiceHandle", _ "hwnd", $hSCObject ) Return $avCSH[0] EndFunc ;==> CloseServiceHandle Func ControlService($hService, $iControl) Local $avCS = DllCall( "advapi32.dll", "int", "ControlService", _ "hwnd", $hService, _ "dword", $iControl, _ "str", "" ) Return $avCS[0] EndFunc ;==> ControlService Func GetLastError() Local $aiE = DllCall("kernel32.dll", "dword", "GetLastError") Return $aiE[0] EndFunc ;==> GetLastError Func OpenSCManager($sComputerName, $iAccess) Local $avOSCM = DllCall( "advapi32.dll", "hwnd", "OpenSCManager", _ "str", $sComputerName, _ "str", "ServicesActive", _ "dword", $iAccess ) Return $avOSCM[0] EndFunc ;==> OpenSCManager Func OpenService($hSC, $sServiceName, $iAccess) Local $avOS = DllCall( "advapi32.dll", "hwnd", "OpenService", _ "hwnd", $hSC, _ "str", $sServiceName, _ "dword", $iAccess ) Return $avOS[0] EndFunc ;==> OpenService Func QueryServiceConfig($hService, $pServiceConfig, $iBufSize) Local $avQSC = DllCall( "advapi32.dll", "int", "QueryServiceConfig", _ "hwnd", $hService, _ "ptr", $pServiceConfig, _ "dword", $iBufSize, _ "dword*", 0 ) Return $avQSC EndFunc ;==> QueryServiceConfig