1. Dashboard
  2. Mitglieder
    1. Letzte Aktivitäten
    2. Benutzer online
    3. Team
    4. Mitgliedersuche
  3. Forenregeln
  4. Forum
    1. Unerledigte Themen
  • Anmelden
  • Registrieren
  • Suche
Alles
  • Alles
  • Artikel
  • Seiten
  • Forum
  • Erweiterte Suche
  1. AutoIt.de - Das deutschsprachige Forum.
  2. Mitglieder
  3. Xenobiologist

Beiträge von Xenobiologist

  • Installationsroutine stoppt!

    • Xenobiologist
    • 15. November 2007 um 16:34

    Hi,

    guck dir mal WinTitleMatchMode an bei den Opt.

    Dann würde ich ControlSend oder ControlClick nutzen.

    So long,

    Mega

  • Feld leer oder nicht?

    • Xenobiologist
    • 15. November 2007 um 16:32

    Hi,

    erstens mit WinTitleMatchMode arbeiten

    zweitens auf "" prüfen, oder ClipGet ClipPut angucken.

    So long,

    Mega

  • Netzwerktraffic messen?

    • Xenobiologist
    • 15. November 2007 um 12:21

    Hi,

    Spoiler anzeigen
    [autoit]


    #include <GUIConstants.au3>
    #include <Constants.au3>
    Opt("GUIOnEventMode", 1)

    [/autoit] [autoit][/autoit] [autoit]

    ; == GUI generated with Koda ==);
    $NetGUI = GUICreate("NetStats", 293, 190, 195, 148)
    GUICtrlCreateLabel("Uploaded", 8, 8, 73, 20, $WS_GROUP)
    GUICtrlSetFont(-1, 10, 800, 0, "MS Sans Serif")

    [/autoit] [autoit][/autoit] [autoit]

    $UpLoad = GUICtrlCreateLabel("Upload", 8, 32, 100, 20, BitOR($SS_SUNKEN, $WS_GROUP))
    GUICtrlSetFont(-1, 10, 400, 0, "MS Sans Serif")

    [/autoit] [autoit][/autoit] [autoit]

    GUICtrlCreateLabel("Downloaded", 176, 8, 91, 20, $WS_GROUP)
    GUICtrlSetFont(-1, 10, 800, 0, "MS Sans Serif")

    [/autoit] [autoit][/autoit] [autoit]

    $Download = GUICtrlCreateLabel("Download", 176, 32, 105, 20, BitOR($SS_SUNKEN, $WS_GROUP))
    GUICtrlSetFont(-1, 10, 400, 0, "MS Sans Serif")

    [/autoit] [autoit][/autoit] [autoit]

    $Up = GUICtrlCreateLabel("TodayUp", 8, 96, 100, 20, BitOR($SS_SUNKEN, $WS_GROUP))
    GUICtrlSetFont(-1, 10, 400, 0, "MS Sans Serif")

    [/autoit] [autoit][/autoit] [autoit]

    $Down = GUICtrlCreateLabel("TodayDown", 176, 96, 100, 20, BitOR($SS_SUNKEN, $WS_GROUP))
    GUICtrlSetFont(-1, 10, 400, 0, "MS Sans Serif")

    [/autoit] [autoit][/autoit] [autoit]

    GUICtrlCreateLabel("Today", 8, 72, 49, 20, $WS_GROUP)
    GUICtrlSetFont(-1, 10, 800, 0, "MS Sans Serif")

    [/autoit] [autoit][/autoit] [autoit]

    $Reset = GUICtrlCreateButton("Reset", 104, 156, 73, 25)

    [/autoit] [autoit][/autoit] [autoit]

    ;GUICtrlSetOnEvent ( $Reset, "_reset" )

    [/autoit] [autoit][/autoit] [autoit]

    GUISetOnEvent(-3, "_exit")

    [/autoit] [autoit][/autoit] [autoit]

    GUISetState(@SW_SHOW)

    [/autoit] [autoit][/autoit] [autoit]

    $UpStr = 0
    $DownStr = 0
    $Tup = 0
    $Tdwn = 0

    [/autoit] [autoit][/autoit] [autoit][/autoit] [autoit]

    _netstat($UpStr, $DownStr); Get inital values
    $Tup = $UpStr
    $Tdwn = $DownStr

    [/autoit] [autoit][/autoit] [autoit]

    While 1
    _netstat($UpStr, $DownStr)
    GUICtrlSetData($Download, $DownStr)
    GUICtrlSetData($UpLoad, $UpStr)
    $TodayUp = $UpStr - $Tup
    $TodayDown = $DownStr - $Tdwn
    GUICtrlSetData($Up, $TodayUp)
    GUICtrlSetData($Down, $TodayDown)
    Sleep(1000)
    WEnd

    [/autoit] [autoit][/autoit] [autoit]

    Func _netstat(ByRef $UpStr, ByRef $DownStr)
    $NetStat = Run(@ComSpec & " /c netstat -e", @SystemDir, @SW_HIDE, 2)
    $Line = StdoutRead($NetStat, 130)
    $Start = StringInStr($Line, "Bytes")
    $Line = StringMid($Line, $Start + 5)
    $Line = StringStripWS($Line, 7)
    $Lines = StringSplit($Line, " ")
    $UpStr = $Lines[2]
    $DownStr = $Lines[1]
    EndFunc ;==>_netstat

    [/autoit] [autoit][/autoit] [autoit]

    ;Func _Reset(ByRef $TUp, ByRef $TDwn)
    ; _netstat($UpStr,$DownStr)
    ; $Tup = $UpStr
    ; $Tdwn = $DownStr
    ;EndFunc

    [/autoit] [autoit][/autoit] [autoit]

    Func _exit()
    Exit
    EndFunc ;==>_exit

    [/autoit]

    So long,

    Mega

  • Netzwerktraffic messen?

    • Xenobiologist
    • 14. November 2007 um 18:20

    Hi,

    http://support.microsoft.com/kb/148942/DE/

    Edit: netstat -e

    So long,

    Mega

  • Systemvariable auslesen und verwenden

    • Xenobiologist
    • 14. November 2007 um 18:10

    Hi,

    äh welche Variable brauchst du denn?

    So long,

    Mega

  • EXE aus Netzwerk starten

    • Xenobiologist
    • 14. November 2007 um 13:46

    Hi,

    welche Aufrufe werden denn aus dem Skript heraus gemacht?

    So long,

    Mega

  • Mausfunktionen

    • Xenobiologist
    • 14. November 2007 um 13:27

    Hi,

    nette Idee, aber ich denke die kann ich nicht umsetzen. :D Ich habe früher soooo viele Codeschnipsel kopiert zusammengemischt und unter wilden Namen abgespeichert, dass ich wirklich nicht sagen kann, was von mir und was von anderen ist.

    (Bei vielen Skripte sieht man es aber, wenn ich wieder draufgucke)

    So long,

    Mega

    P.S.: Ich finde es auch übertrieben, wegen ein paar Codezeilen die nichts spannendes machen (nichts was nicht selbst könnte) ein Autorverweis zu machen. Dafür ist es ja ein freies Forum. Außerdem bin ich zu faul zu gucken, ob derjenige von dem ich kopiert habe auch wirklich der Autor ist und nicht auch schon kopiert hat. USW. ......

  • Idee: Contest - 20-Zeiler (1. PROBELAUF!)

    • Xenobiologist
    • 14. November 2007 um 12:14

    Hi,

    also gewinnt derjenige, der die meisten DLLCalls nutzt. :) (diese sind ja quasi wieder Unterprogramme.

    Naja egal, machen wir erstmal diesen Kontext und danach evtl. einen mit Zielvorgabe.

    So long,

    Mega

  • Idee: Contest - 20-Zeiler (1. PROBELAUF!)

    • Xenobiologist
    • 14. November 2007 um 11:09

    Hi,

    hmmh, dass finde ich eher unspannend. Dann vergleicht man ja später Äpfel mit Birnen. Es sollte aus meiner Sicht schon ein klares Ziel vorgegeben werden und wer dies am schnellsten kürzesten oder effizientesten erreicht hat gewonnen.

    So long,

    Mega

  • Mausfunktionen

    • Xenobiologist
    • 14. November 2007 um 11:06

    Hi,

    nein ist gemischt. Ausm Forum, angepaßte ausm Forum und Eigenkreationen.

    So long,

    Mega

  • Idee: Contest - 20-Zeiler (1. PROBELAUF!)

    • Xenobiologist
    • 13. November 2007 um 23:32

    Hi,

    steht denn das Ziel des Skripts schon fest?

    So long,

    Mega

  • Computer IP ändern?

    • Xenobiologist
    • 13. November 2007 um 19:04

    Hi,

    google doch mal ein bißchen und lies dich ein. Wenn es ein Onlinegame ist, dann sollte es recht einfach sein.

    So long,

    Mega

  • Mausfunktionen

    • Xenobiologist
    • 13. November 2007 um 18:39

    Hi,

    hier ist Platz für ein paar Mouseskripte.

    Mouse anhalten per misc

    Spoiler anzeigen
    [autoit]

    #include <Misc.au3>

    [/autoit] [autoit][/autoit] [autoit]

    HotKeySet("+!h","_holdMouse")

    [/autoit] [autoit][/autoit] [autoit]

    Func _holdMouse()
    $Pos = MouseGetPos()
    _MouseTrap($Pos[0],$Pos[1])
    HotKeySet("+!h","_releaseMouse")
    EndFunc

    [/autoit] [autoit][/autoit] [autoit]

    Func _releaseMouse()
    _MouseTrap()
    HotKeySet("+!h","_holdMouse")
    EndFunc

    [/autoit] [autoit][/autoit] [autoit][/autoit] [autoit]

    While 1
    Sleep(200)
    WEnd

    [/autoit]

    Mouse anhalten ohne misc :D

    Spoiler anzeigen
    [autoit]

    Opt("OnExitFunc", "endscript")

    [/autoit] [autoit][/autoit] [autoit]

    HotKeySet("1", "end")
    HotKeySet("3", "start")

    [/autoit] [autoit][/autoit] [autoit]

    While 1
    Sleep(100)
    WEnd

    [/autoit] [autoit][/autoit] [autoit]

    Func start()
    Local $pos = MouseGetPos()
    _MouseStop($pos[0], $pos[1])
    For $i = 0 To 20
    ToolTip($i & " of 20")
    Sleep(100)
    Next
    _MouseStop()
    ToolTip('')
    EndFunc ;==>start

    [/autoit] [autoit][/autoit] [autoit]

    Func _MouseStop($posX = 0, $posY = 0)
    Local $av_ret
    If @NumParams = 2 Then
    Local $Rect = DllStructCreate("int;int;int;int")
    If @error Then Return 0
    DllStructSetData($Rect, 1, $posX)
    DllStructSetData($Rect, 2, $posY)
    DllStructSetData($Rect, 3, $posX)
    DllStructSetData($Rect, 4, $posY)
    $av_ret = DllCall("user32.dll", "int", "ClipCursor", "ptr", DllStructGetPtr($Rect))
    ElseIf @NumParams = 0 Then
    $av_ret = DllCall("user32.dll", "int", "ClipCursor", "int", 0)
    EndIf
    Return $av_ret[0]
    EndFunc ;==>_MouseStop

    [/autoit] [autoit][/autoit] [autoit]

    Func end()
    Exit (0)
    EndFunc ;==>end

    [/autoit] [autoit][/autoit] [autoit]

    Func endscript()
    _MouseStop()
    Exit (0)
    EndFunc ;==>endscript

    [/autoit]

    Mouse Warp (läuft durch den Monitor)

    Spoiler anzeigen
    [autoit]

    HotKeySet("{Esc}","_Exit")

    [/autoit] [autoit][/autoit] [autoit]

    _MouseWrap()

    [/autoit] [autoit][/autoit] [autoit]

    Func _MouseWrap()
    TrayTip("hot key:","press Esc to exit",30)
    While 1
    $pos = MouseGetPos()
    If $pos[0] < 2 Then MouseMove(@DeskTopWidth - 2, $pos[1], 1)
    If $pos[0] > @DeskTopWidth - 2 Then MouseMove(2, $pos[1], 1)
    If $pos[1] < 2 Then MouseMove($pos[0], @DesktopHeight - 2, 1)
    If $pos[1] > @DeskTopHeight - 2 Then MouseMove($pos[0], 2, 1)
    Sleep(1)
    Wend
    EndFunc

    [/autoit] [autoit][/autoit] [autoit]

    Func _Exit()
    Exit
    EndFunc

    [/autoit]

    Mouse aus Bereich fernhalten

    Spoiler anzeigen
    [autoit]

    Global $GUI = GUICreate("Can't Touch This", 200, 100, 200, 200)
    GUISetState()
    AdlibEnable("CallMouseRepel", 10)

    [/autoit] [autoit][/autoit] [autoit]

    While 1
    Sleep(1000)
    WEnd

    [/autoit] [autoit][/autoit] [autoit]

    Func CallMouseRepel()
    $coords = WinGetPos($GUI)
    _MouseRepel($coords[0], $coords[1], $coords[0] + $coords[2], $coords[1] + $coords[3])
    EndFunc ;==>CallMouseRepel

    [/autoit] [autoit][/autoit] [autoit]

    Func _MouseRepel($i_left = 0, $i_top = 0, $i_right = 0, $i_bottom = 0)
    Local $a_MousePos = MouseGetPos()
    Local $i_XCordinate = -1, $i_YCordinate = -1
    If $a_MousePos[0] >= $i_left And $a_MousePos[0] <= $i_right Then
    If ($a_MousePos[0] - $i_left) < ($i_right - $a_MousePos[0]) Then
    $i_XCordinate = $i_left - 1
    Else
    $i_XCordinate = $i_right + 1
    EndIf
    EndIf
    If $a_MousePos[1] >= $i_top And $a_MousePos[1] <= $i_bottom Then
    If ($a_MousePos[1] - $i_top) < ($i_bottom - $a_MousePos[1]) Then
    $i_YCordinate = $i_top - 1
    Else
    $i_YCordinate = $i_bottom + 1
    EndIf
    EndIf
    If $i_XCordinate <> -1 And $i_YCordinate <> -1 Then
    If Abs($i_XCordinate - $a_MousePos[0]) > Abs($i_YCordinate - $a_MousePos[1]) Then
    MouseMove($a_MousePos[0], $i_YCordinate, 1)
    ElseIf Abs($i_XCordinate - $a_MousePos[0]) < Abs($i_YCordinate - $a_MousePos[1]) Then
    MouseMove($i_XCordinate, $a_MousePos[1], 1)
    Else
    MouseMove($i_XCordinate, $i_YCordinate, 1)
    EndIf
    EndIf
    EndFunc ;==>_MouseRepel

    [/autoit]

    Mauszeigertauschen

    Spoiler anzeigen
    [autoit]

    #cs
    mode = 1 for swapping
    mode = 0 for returning to normal mode
    #ce

    [/autoit] [autoit][/autoit] [autoit]

    SwapMouseButton(1)
    ToolTip("swapped!", 0, 0)
    Sleep(5000)
    SwapMouseButton(1) ; Ich muss immer swappen :)
    ToolTip("Normal!", 0, 0)

    [/autoit] [autoit][/autoit] [autoit]

    Func SwapMouseButton($mode = 1)
    DllCall("user32.dll", "int", "SwapMouseButton", "int", $mode)
    EndFunc ;==>SwapMouseButton

    [/autoit] [autoit][/autoit] [autoit]

    _SwitchMousePrimary(_MouseGetPrimary())
    Func _MouseGetPrimary()
    Local $aDLLMButton = DllCall('User32.dll', 'int', 'SwapMouseButton', 'int', True)
    If IsArray($aDLLMButton) And $aDLLMButton[0] <> 0 Then Return 0
    If IsArray($aDLLMButton) And $aDLLMButton[0] = 0 Then DllCall('User32.dll', 'int', 'SwapMouseButton', 'int', False)
    Return 1
    EndFunc ;==>_MouseGetPrimary

    [/autoit] [autoit][/autoit] [autoit]

    Func _SwitchMousePrimary($nPrimary)
    Return DllCall('User32.dll', 'int', 'SwapMouseButton', 'int', $nPrimary)
    EndFunc

    [/autoit]

    Mouseclickzeit messen

    Spoiler anzeigen
    [autoit]

    While 1
    $LeftClick = _TimeClick('01')
    If $LeftClick Then MsgBox(64, 'Info:', 'Left mouse was held for: ' & StringFormat('%i second(s) or %i millisecond(s)', Mod($LeftClick, 60), $LeftClick * 1000))
    Sleep(10)
    WEnd

    [/autoit] [autoit][/autoit] [autoit]

    Func _TimeClick($vKey)
    Local $MouseDownTime
    If _IsPressed($vKey) Then
    $MouseDownTime = TimerInit()
    While _IsPressed($vKey)
    Sleep(10)
    WEnd
    Return TimerDiff($MouseDownTime) / 1000
    EndIf
    Return 0
    EndFunc

    [/autoit] [autoit][/autoit] [autoit]

    Func _IsPressed($v_R, $v_dll = 'user32.dll')
    $v_R = DllCall($v_dll, 'int', 'GetAsyncKeyState', 'int', '0x' & $v_R)
    Return (Not @error And BitAND($v_R[0], 0x8000) = 0x8000) * 1
    EndFunc

    [/autoit]

    Mouse Bewegungsrichtungen

    Spoiler anzeigen
    [autoit]

    $gesture = "896321478"
    $sleep = 100
    $debug = True

    [/autoit] [autoit][/autoit] [autoit]

    #cs
    DIRECTIONS:
    numpad-sytle

    [/autoit] [autoit][/autoit] [autoit]

    7 8 9

    [/autoit] [autoit][/autoit] [autoit]

    4 + 6

    [/autoit] [autoit][/autoit] [autoit]

    1 2 3

    [/autoit] [autoit][/autoit] [autoit]

    #ce

    [/autoit] [autoit][/autoit] [autoit]

    Global Const $pi = 3.14159265358979
    $current = ""
    $direction = ""
    $timer = TimerInit()

    [/autoit] [autoit][/autoit] [autoit]

    While 1
    $pos_old = MouseGetPos()
    Sleep($sleep)
    $pos_new = MouseGetPos()
    If $pos_new[0] = $pos_old[0] and $pos_new[1] = $pos_old[1] Then ContinueLoop
    If TimerDiff($timer) > 500 Then $current = ""
    $a = GetAnglePO($pos_new[0] - $pos_old[0], $pos_new[1] - $pos_old[1]) * 57.2957795130823
    Select
    Case $a >= 337.5 or $a < 22.5
    $direction = "6"
    Case $a >= 22.5 and $a < 67.5
    $direction = "3"
    Case $a >= 67.5 and $a < 112.5
    $direction = "2"
    Case $a >= 112.5 and $a < 157.5
    $direction = "1"
    Case $a >= 157.5 and $a < 202.5
    $direction = "4"
    Case $a >= 202.5 and $a < 247.5
    $direction = "7"
    Case $a >= 247.5 and $a < 292.5
    $direction = "8"
    Case $a >= 292.5 and $a < 337.5
    $direction = "9"
    EndSelect
    If $direction <> StringRight($current, 1) Then $current &= $direction
    If $debug Then ToolTip("Current:" & @TAB & $current & @CRLF & "Direction:" & @TAB & $direction)
    If StringInStr($current, $gesture) Then
    MsgBox(0, "gesture", $current)
    $current = ""
    EndIf
    $timer = TimerInit()
    WEnd

    [/autoit] [autoit][/autoit] [autoit]

    Func GetAnglePO( $x, $y ) ;by blindwig
    Select
    Case $x > 0
    If $y >= 0 Then
    Return ATan($y / $x)
    Else
    Return ATan($y / $x) + 2 * $pi
    EndIf
    Case $x = 0
    If $y = 0 Then
    Return 0
    ElseIf $y > 0 Then
    Return $pi / 2
    Else
    Return 3 * $pi / 2
    EndIf
    Case $x < 0
    Return ATan($y / $x) + $pi
    EndSelect
    EndFunc

    [/autoit]

    Reale Mausbewegungen simuliert

    Spoiler anzeigen
    [autoit]

    ;WinMinimizeAll()
    ;mousemovereal(0,0,3,0,1)
    ;mousemovereal(200,200,3,0,1)
    ;mouseclickreal("left",50,100,1,1,0,1)
    ;mouseclickdragreal("left",100,100,400,400,1,1,10,0)
    ;mousedownreal("left")
    ;mousemovereal(600,600,1,0,1)
    ;mouseupreal("left")
    ;WinMinimizeAllUndo()
    Testreal2(1,1);1=X ,2=Y ,3=Speed << How higher , how faster
    ; Note : 1 = x goto.
    ; 2 = y goto.
    ; 3 = Speed behide steps
    ; 4 = The total of steps .. For a nice example use speed 10 and steps 2
    ; 5 = automatic makes a the good step number. 1 to enable , 0 to disable
    ;This is named "Mousemovereal", something which simulates a normally moving mouse cursor. Be honest,
    ;how many times do you draw a straight line from point a to point b?
    ; If you're lucky, that means if blizzard is running a detector you don't want to be making perfect straight lines all the time.
    ;This function moves your mouse to the desired position, but not in a straight line
    ;
    ;dit is mousemovereal dat betekend dat het een echte mousemove na maakt , want zeg zelf , hoe vaak
    ;trek je een rechte lijn van a tot b ? soms als je een keer mazzel hebt , dus als blizzard een
    ;detector heeft draaien moet je niet altijd een perfecte rechte lijn maken , daarom gebruik deze funcie
    ;deze is niet recht maar gaat wel naar gewenste posietie
    ;
    ;This is mouseclickreal , this is the same as mousemovereal but then with click funcion , parameters 1=Button 2=x 3=y 4=speed 5=nubclick 6=steps

    [/autoit] [autoit][/autoit] [autoit]

    func mousemovereal($x,$y,$speed,$steps,$Auto)
    ; The mousemover , but he dont make a perfect line :)
    dim $q[2]
    $q[0] = $x
    $q[1] = $y
    $p = MouseGetpos()
    $len = Sqrt(($p[0]+$q[0])*($p[0]+$q[0]))+(($p[1]+$q[1])*($p[1]+$q[1]))
    if $Auto = 1 Then
    $steps = $len / 2000
    tooltip("Auto Steps :"&$steps)
    endif
    $mousestart = MouseGetpos()
    for $i = 1 to $steps
    mousemove(($p[0]+($i*($q[0]-$p[0])/$steps))+random(random(-2,0),random(0,2)),$p[1]+($i*($q[1]-$p[1])/$steps)+random(random(-2,0),random(0,2)),$speed)
    $Secondmove = MouseGetPos()
    next
    mousemove($x,$y,$speed)
    endfunc
    func mouseclickreal($button ,$x,$y,$speed,$Nubofclicks,$steps,$Auto)
    ;A mouseclick without a perfect line mouse move :)
    mousemovereal($x,$y,$speed,$steps,$Auto)
    $pos = mousegetpos()
    mouseclick($button,$pos[0],$pos[1],$Nubofclicks)
    EndFunc
    func mouseclickdragreal($button,$x,$y,$x2,$y2,$speed,$Nubofclicks,$steps,$Auto)
    ;Drag with a real mouse move :) , How mutch time you move your mouse really in a perfect line ? , why you shall do it perfect in drag?
    mousemovereal($x,$y,$speed,$steps,$Auto)
    mousedown($button)
    mousemovereal($x2,$y2,$speed,$steps,$Auto)
    mouseup($button)
    endfunc
    func mousedownreal($button)
    ;Maby its sicko , but do you click your mouse without a little mouse move ?
    $pos = MouseGetPos()
    mousemove($pos[0]-random(random(-2,0),random(0,2)),$pos[1]-random(random(-2,0),random(0,2)),1)
    mousedown($button)
    EndFunc
    func mouseupreal($button)
    ;Maby its sicko , but do you click your mouse without a little mouse move ?
    $pos = MouseGetPos()
    mousemove($pos[0]-random(random(-2,0),random(0,2)),$pos[1]-random(random(-2,0),random(0,2)),1)
    mouseup($button)
    EndFunc
    ;\/ = beta , alpha
    ; This here under is beta testing , TestReal Works..
    ; \/ = beta , alpha
    func TestReal($x,$y)
    dim $q[2]
    $q[0] = $x
    $q[1] = $y
    $p = MouseGetpos()
    $len = Sqrt(($p[0]+$q[0])*($p[0]+$q[0]))+(($p[1]+$q[1])*($p[1]+$q[1]))
    $steps = $len / 1000
    tooltip("Auto Steps :"&$steps)
    sleep(5000)
    $mousestart = MouseGetpos()
    for $i = 1 to $steps
    mousemove(($p[0]+($i*($q[0]-$p[0])/$steps))+random(random(-2,0),random(0,2)),$p[1]+($i*($q[1]-$p[1])/$steps)+random(random(-2,0),random(0,2)),1)
    $S = MouseGetPos()
    tooltip("Auto Steps :"&sqrt(($S[0]+$q[0])*($S[0]+$q[0]))+(($S[1]+$q[1])*($S[1]+$q[1]))/1000,0,05)
    next
    mousemove($x,$y,1)
    endfunc
    func TestReal2($x,$y)
    $do = 1
    dim $q[2]
    $q[0] = $x
    $q[1] = $y
    $p = MouseGetpos()
    $len = Sqrt(($p[0]+$q[0])*($p[0]+$q[0]))+(($p[1]+$q[1])*($p[1]+$q[1]))
    $steps = $len / 1000
    $Random=random(0,1)
    tooltip("Auto Steps :"&$steps&"|random :"&$random)
    $do = 0
    if $Random > 1.75 Then
    $Do = 1
    endif
    ;sleep(5000)
    If $do =1 Then
    dim $r[2]
    dim $s[2]
    $s[0]=$p[0] /(+(Cos($q[1])*2))
    $s[1]=$p[1] /(+(Cos($q[0])*2))
    $r[0]=$q[0] /(+(Cos($p[1])*2))
    $r[1]=$q[1] /(+(Cos($p[0])*2))
    $max = random(-$steps,$steps)
    for $count = 1 to +$max
    $i = $max
    mousemove(($s[0]+($i*($r[0]-$s[0])/$steps))+random(random(-2,0),random(0,2)),$s[1]+($i*($r[1]-$s[1])/$steps)+random(random(-2,0),random(0,2)),1)
    tooltip("Auto Steps :"&sqrt(($S[0]+$q[0])*($S[0]+$q[0]))+(($S[1]+$q[1])*($S[1]+$q[1]))/1000,0,05)
    next
    return TestReal2($q[0],$q[1])
    endif
    $mousestart = MouseGetpos()
    for $i = 1 to $steps
    mousemove(($p[0]+($i*($q[0]-$p[0])/$steps))+random(random(-2,0),random(0,2)),$p[1]+($i*($q[1]-$p[1])/$steps)+random(random(-2,0),random(0,2)),1)
    $S = MouseGetPos()
    tooltip("Auto Steps :"&sqrt(($S[0]+$q[0])*($S[0]+$q[0]))+(($S[1]+$q[1])*($S[1]+$q[1]))/1000,0,05)
    next
    EndFunc

    [/autoit]

    Lustige Mausbewegungen

    Spoiler anzeigen
    [autoit]

    ; ----------------------------------------------------------------------------
    ;
    ; AutoIt Version: 3.1.1 beta
    ; Author: Thorsten Meger
    ;
    ; Script Function: Mouse move around
    ;
    ; ----------------------------------------------------------------------------
    #include<Array.au3>
    #include <math.au3>
    HotKeySet("{esc}", "end")
    HotKeySet("1", "moveRandom")
    HotKeySet("2", "moveButterfly")

    [/autoit] [autoit][/autoit] [autoit]

    Global Const $OCR_APPSTARTING = "AppStarting"
    Global Const $OCR_NORMAL = 32512
    Global Const $OCR_CROSS = 32515
    Global Const $OCR_HAND = 32649
    Global Const $OCR_IBEAM = 32513
    Global Const $OCR_NO = 32648
    Global Const $OCR_SIZEALL = 32646
    Global Const $OCR_SIZENESW = 32643
    Global Const $OCR_SIZENS = 32645
    Global Const $OCR_SIZENWSE = 32642
    Global Const $OCR_SIZEWE = 32644
    Global Const $OCR_UP = 32516
    Global Const $OCR_WAIT = 32514
    Dim $mouseFuncs = 0
    Dim $cursorArray
    $cursorArray = _ArrayCreate ("3dgarro.cur")

    [/autoit] [autoit][/autoit] [autoit]

    $search = FileFindFirstFile(@WindowsDir & "\cursors\*.*")
    If $search = -1 Then
    MsgBox(0, "Error", "No Cursors found!")
    Exit
    EndIf

    [/autoit] [autoit][/autoit] [autoit]

    While 1
    $cursor = FileFindNextFile($search)
    If @error Then ExitLoop
    _ArrayAdd($cursorArray, $cursor)
    WEnd
    FileClose($search)

    [/autoit] [autoit][/autoit] [autoit]

    While 1
    If Random(0, 1, 1) = 1 Then
    changeCursor()
    EndIf
    Sleep(1500)
    WEnd

    [/autoit] [autoit][/autoit] [autoit]

    Func changeCursor()
    $nr = Random($cursorArray[0], UBound($cursorArray) - 1, 1)
    _SetCursor(@WindowsDir & "\cursors\" & $cursorArray[$nr], $OCR_NORMAL)
    EndFunc ;==>changeCursor

    [/autoit] [autoit][/autoit] [autoit]

    Func _SetCursor($s_file, $i_cursor)
    Local $newhcurs, $lResult
    $newhcurs = DllCall("user32.dll", "int", "LoadCursorFromFile", "str", $s_file)
    If Not @error Then
    $lResult = DllCall("user32.dll", "int", "SetSystemCursor", "int", $newhcurs[0], "int", $i_cursor)
    If Not @error Then
    $lResult = DllCall("user32.dll", "int", "DestroyCursor", "int", $newhcurs[0])
    Else
    MsgBox(0, "Error", "Failed SetSystemCursor")
    EndIf
    Else
    MsgBox(0, "Error", "Failed LoadCursorFromFile")
    EndIf
    EndFunc ;==>_SetCursor

    [/autoit] [autoit][/autoit] [autoit]

    Func end()
    exit (0)
    EndFunc ;==>end

    [/autoit] [autoit][/autoit] [autoit]

    Func restoreCursor()
    Run('RunDll32.exe shell32.dll,Control_RunDLL main.cpl @0,1')
    WinWait('Eigenschaften von Maus')
    ControlSend('Eigenschaften von Maus', '', '', '{Enter}')
    EndFunc ;==>restoreCursor

    [/autoit] [autoit][/autoit] [autoit]

    Func moveRandom()
    While 1
    MouseMove(Random(0, @DesktopWidth, 1), Random(0, @DesktopHeight, 1))
    If Random(0, 1, 1) = 1 Then
    changeCursor()
    EndIf
    WEnd
    EndFunc ;==>moveRandom

    [/autoit] [autoit][/autoit] [autoit]

    Func moveButterfly()
    Global Const $PI = 3.1415926535897932384626433832795
    Dim $t
    Dim $expr
    For $theta = 0 To 924 * $PI;ALSO MAKE THE LOOP GO LONGER
    $t = _Radian ($theta)
    $expr = Exp(Cos($t)) - 2 * Cos(4 * $t) - Sin($t / 12) ^ 5
    $x = 400 + 100 * Cos($t) * $expr
    $y = 400 + 100 * Sin($t) * $expr
    ConsoleWrite($x & "," & $y & @LF);Use for debugging with SciTE
    If Random(0, 80, 1) = 1 Then
    changeCursor()
    EndIf
    MouseMove($x, $y, 1)
    Next
    EndFunc ;==>moveButterfly

    [/autoit] [autoit][/autoit] [autoit]

    Func OnAutoItStart()
    ;saveCurrentCursor()
    EndFunc ;==>OnAutoItStart

    [/autoit] [autoit][/autoit] [autoit]

    Func OnAutoItExit()
    restoreCursor()
    EndFunc ;==>OnAutoItExit

    [/autoit] [autoit][/autoit] [autoit]

    Func saveCurrentCursor()
    ;DllCall...
    EndFunc ;==>saveCurrentCursor

    [/autoit]

    Mausrichtungen tauschen

    Spoiler anzeigen
    [autoit]

    HotKeySet("{ESC}", "end")

    [/autoit] [autoit][/autoit] [autoit]

    HotKeySet("^!i","_InvertOnOff")
    HotKeySet("^!x","_InvertXOnOff")
    HotKeySet("^!y","_InvertYOnOff")

    [/autoit] [autoit][/autoit] [autoit]

    Global $MouseStart = _GetCursorPos()
    Global $MousePos
    Global $InvertX = True ; X-Achse tauschen (rechts-links)
    Global $InvertY = True ; Y-Achse tauschen (hoch-runter)
    Global $InvertOn = False

    [/autoit] [autoit][/autoit] [autoit]

    While 1
    If $InvertOn Then
    $MousePos = _GetCursorPos()
    $Dx = $MousePos[0] - $MouseStart[0]
    $Dy = $MousePos[1] - $MouseStart[1]

    [/autoit] [autoit][/autoit] [autoit]

    ; Mousepositionen am Rand korrigieren
    If $Dx > 1500 Then $Dx = -1
    If $Dy > 1500 Then $Dy = -1
    If $Dx < -1500 Then $Dx = 1
    If $Dy < -1500 Then $Dy = 1

    If $InvertX Then
    $MouseStart[0] = $MousePos[0] - 2 * $Dx
    Else
    $MouseStart[0] = $MousePos[0]
    EndIf

    If $InvertY Then
    $MouseStart[1] = $MousePos[1] - 2 * $Dy
    Else
    $MouseStart[1] = $MousePos[1]
    EndIf

    [/autoit] [autoit][/autoit] [autoit]

    _SetCursorPos($MouseStart[0], $MouseStart[1])
    EndIf

    Sleep(2) ; Prozessor entlasten
    Wend

    [/autoit] [autoit][/autoit] [autoit][/autoit] [autoit]

    Func _InvertOnOff()
    If $InvertOn Then
    $InvertOn = False
    Else
    $InvertOn = True
    $MouseStart = _GetCursorPos()
    EndIf
    EndFunc

    [/autoit] [autoit][/autoit] [autoit][/autoit] [autoit]

    Func _GetCursorPos()
    Local $Pt = DllStructCreate("uint;uint")
    Local $RetVal[2]

    DllCall("user32.dll", "long", "GetCursorPos", "ptr", DllStructGetPtr($Pt))

    [/autoit] [autoit][/autoit] [autoit]

    $RetVal[0] = DllStructGetData($Pt,1)
    $RetVal[1] = DllStructGetData($Pt,2)

    Return $RetVal
    EndFunc

    Func _SetCursorPos($PosX, $PosY)
    DllCall("user32.dll", "long", "SetCursorPos", "long", $PosX, "long", $PosY)
    EndFunc

    [/autoit] [autoit][/autoit] [autoit]

    Func _InvertXOnOff()
    if $InvertX Then
    $InvertX = False
    Else
    $InvertX = True
    EndIf
    EndFunc

    [/autoit] [autoit][/autoit] [autoit]

    Func _InvertYOnOff()
    if $InvertY Then
    $InvertY = False
    Else
    $InvertY = True
    EndIf
    EndFunc

    [/autoit] [autoit][/autoit] [autoit]

    Func end()
    Exit(0)
    EndFunc

    [/autoit]

    Maussound

    Spoiler anzeigen
    [autoit]

    #include <misc.au3>
    HotKeySet("{end}", "end")
    $P = 1
    While 1
    If (_IsPressed("01") And _IsPressed("02") And _IsPressed("04")) Or $P Then;to exit script you have to hold the buttons half a second
    Sleep(500)
    If _IsPressed("01") Or _IsPressed("02") Then $P = 0;if left/rigth mousebutton is klicked start beepthing
    If _IsPressed("01") And _IsPressed("02") And _IsPressed("04") Then Exit;if left+right+third mousebutton is klicked exit script
    Else
    $Mouse = MouseGetPos()
    $Frequenz = ($Mouse[0] / 18 + 10) * ($Mouse[1] / 18 + 10);different sounds for mouse coords
    If _IsPressed("01") Then $Frequenz += 100
    If _IsPressed("02") Then $Frequenz += 200;higher sound if left/right mousebutton clicked
    Beep($Frequenz, 50)
    EndIf
    WEnd
    Func end()
    Exit
    EndFunc ;==>end

    [/autoit]

    So long,

    Mega

  • Computer IP ändern?

    • Xenobiologist
    • 13. November 2007 um 18:28

    HI,

    dann nimm dir einen ausm Netz :) So war es eigentlich gemeint.

    So long,

    Mega

  • Maus aus und an schalten.

    • Xenobiologist
    • 13. November 2007 um 18:21

    HI,

    okay ich werde mal ein paar Mouseskripte zusammenpacken und posten.

    So long,

    Mega

  • Computer IP ändern?

    • Xenobiologist
    • 13. November 2007 um 18:12

    Hi,

    probier es doch aus. Nutz einen Proxy und guck ob du dich anmelden kannst. Ansonsten musst du deine WANIP kontrollieren.

    http://www.whatismyip.de/

    So long,

    Mega

  • Computer IP ändern?

    • Xenobiologist
    • 13. November 2007 um 17:32

    HI,

    warum? Welche IP LAN/WAN?

    So long,

    Mega

  • Maus aus und an schalten.

    • Xenobiologist
    • 13. November 2007 um 17:17

    Hi,

    die ist dabei.

    Es gibt beides. Eine Funktion die die Maus in einem Feld gefangen hält und eine die die Maus aus einem Bereich raushält.

    So long,

    Mega

  • Maus aus und an schalten.

    • Xenobiologist
    • 13. November 2007 um 16:55

    Hi,

    reicht dir BlockInput?

    So long,

    Mega

  • Herzlichen Xenobiologist

    • Xenobiologist
    • 13. November 2007 um 10:47

    HI,

    vielen Dank an ALLE!

    Ja, Xenobiologist kann als Alienforscher betrachtet werden.

    @jonk: Möge die Macht mit Dir sein, das Spice fließen ...

    das ist ein klasse Satz :D Ich liebe alles was mit Weltraum/Aliens usw. zu tun hat und Dune 2 war und ist mein absolutes Lieblingsspiel. Die Story ist einfach aber genial!

    Okay, bevor die Frage kommt, folgendes Geschenk habe ich mir gemacht:

    My new car

    So long,

    Mega

Spenden

Jeder Euro hilft uns, Euch zu helfen.

Download

AutoIt Tutorial
AutoIt Buch
Onlinehilfe
AutoIt Entwickler
  1. Datenschutzerklärung
  2. Impressum
  3. Shoutbox-Archiv
Community-Software: WoltLab Suite™