Hi,
bei mir kein Problem. ![]()
XP 32 bit !
Mega
Hi,
bei mir kein Problem. ![]()
XP 32 bit !
Mega
Hi,
schon mal ControlSetText ptobiert?
Mega
Welche Anwendung ist es denn? Kannst du die exe aufrufen in einer DosBox mit -? oder sowas?
Mega
Also 1. ist es sehr ungewöhnlich auf die Auswahl eines Radiobuttons etwas in eine Datei zu schreiben
Das beides drin steht ist von dir so beschrieben.
Wenn 1 - dann hinzufügen, wenn 2 dann alles löschen und nur 2 reinschreiben.
Was ich eingebaut habe sollte folgendes:
Der WMCommand verhindert die Eingabe von Werten größer 1899 ohne zusätzliche Arbeit für dich. Sehr praktisch
Die Checkboxabfrage sollte nur zeigen, dass man für wiederkehrende Aufgaben Funktionen schreiben sollte und möglichst wenig Code in der Whilfe, da diese ansonsten lang und unübersichtlich wird. Außer besser auslagern in Funktionen.
Mega
HI,
habe dir 2 kleine Vorschläge eingebaut.
#include <File.au3>
#include <GUIConstantsEx.au3>
#include <EditConstants.au3>
#include <WinAPI.au3>
#include <WindowsConstants.au3>
#cs
Script Nr. 17 von 81 für Projekt "Grafische Oberfläche X_26"
#ce
#Region ### START Koda GUI section ### Form=
$Form1 = GUICreate("44_45_46_47_CB_RB_RB", 362, 80, 193, 125)
$Checkbox46 = GUICtrlCreateCheckbox("Checkbox46", 5, 5, 89, 15)
$Radio1 = GUICtrlCreateRadio("Radio60", 100, 5, 60, 15)
$Radio2 = GUICtrlCreateRadio("Radio61", 100, 28, 57, 15)
$Input23 = GUICtrlCreateInput("1899", 165, 2, 33, 21, $ES_NUMBER)
GUICtrlSetLimit(-1, 4)
$Date1 = GUICtrlCreateDate("2009/09/21 16:08:49", 165, 25, 186, 21)
$Button1 = GUICtrlCreateButton(" A U S G A B E ", 5, 48, 346, 25, 0)
GUISetState(@SW_SHOW)
#EndRegion ### END Koda GUI section ###
GUICtrlSetState($Radio1, $GUI_DISABLE)
GUICtrlSetState($Radio2, $GUI_DISABLE)
GUIRegisterMsg($WM_COMMAND, "MY_WM_COMMAND")
[/autoit] [autoit][/autoit] [autoit]While 1
$nMsg = GUIGetMsg()
Switch $nMsg
Case $GUI_EVENT_CLOSE
Exit
Case $Checkbox46
_changeState($Checkbox46, $Radio1)
_changeState($Checkbox46, $Radio2)
Case $Radio1
If GUICtrlSetState($Radio1, $GUI_CHECKED) Then
$fH = FileOpen(@ScriptDir & "\44_45_46_47.txt", 1)
FileWrite($fH, GUICtrlRead($Input23))
FileClose($fH)
MsgBox(0, "MELDUNG", GUICtrlRead($Input23)) ; nur zum testen
EndIf
Case $Radio2
If GUICtrlSetState($Radio2, $GUI_CHECKED) Then
Local $Date1, $DTM_SETFORMAT_, $style, $1_day ; ----------------> Anfang : ;Example_date1()
; Um ein bestimmtes Standardformat auszuwählen
$DTM_SETFORMAT_ = 0x1032
$style = "dd.MM.yyyy"; HH:mm:s"
GUICtrlSendMsg($Date1, $DTM_SETFORMAT_, 0, $style)
GUISetState()
$1_day = StringSplit(GUICtrlRead($Date1), ".", 1)
$fH = FileOpen(@ScriptDir & "\44_45_46_47.txt", 2)
FileWrite($fH, $1_day[3] & $1_day[2] & $1_day[1])
FileClose($fH)
MsgBox(0, "Zeit", $1_day[3] & $1_day[2] & $1_day[1]) ; ----------------> Ende : ;Example_date1() ; nur zum testen
EndIf
Case $Button1
EndSwitch
WEnd
Func MY_WM_COMMAND($hWnd, $msg, $wParam, $lParam)
Local $controlID = _WinAPI_LoWord($wParam)
If $controlID = $Input23 Then
If GUICtrlRead($Input23) > 1899 Then GUICtrlSetData($Input23, 1899)
MsgBox(16, "MELDUNG", "Wert maximal 1899", 3)
; hier jegliche Logik rein.
EndIf
EndFunc ;==>MY_WM_COMMAND
Func _changeState($cID, $C1)
If GUICtrlRead($cID) = $GUI_CHECKED Then
GUICtrlSetState($C1, $GUI_ENABLE)
Else
GUICtrlSetState($C1, $GUI_DISABLE)
EndIf
EndFunc ;==>_changeState
Hi,
hier mal ein kurzer Autoitversuch:
Opt('MustDeclareVars', 1)
Local $buffer, $date, $start, $end, $file, $info, $rows
$start = "20090908"
$end = "20090910"
$file = FileRead('log.log')
$info = StringRegExpReplace(StringRegExpReplace($file, ',\d\d:\d\d:\d\d', ''), '(\d\d)\.(\d\d)\.(\d{4})', '\3\2\1')
$rows = StringSplit($info, @LF)
For $i = 0 To UBound($rows) - 1
$date = StringLeft($rows[$i], ![]()
If $date >= $start And $date <= $end Then
$buffer &= $rows[$i] & @CRLF
EndIf
Next
StringReplace($buffer, 'a', '')
ConsoleWrite('Meldung a = ' & @extended & @CRLF)
StringReplace($buffer, 'b', '')
ConsoleWrite('Meldung b = ' & @extended & @CRLF)
Mega
HI,
alles klar. Eine einfach Möglichkeit wäre zum Beispiel einfach Excel 2007 zu nutzen. Da kannst beliebig filtern und zählen.
Aber geht auch mit Autoit ![]()
Mega
Hi,
kannst du das Log zippen und hochladen? Dann kann man mal schnell testen. Es sollte schneller gehen.
Mega
Rechne z.B. mit DateDiff die Differenz zwischen Start und Ende aus. Wenn jetzt ein Datum kommt, dann rechnest du auch hier und vergleichst. Wenn späer als start und kleiner als Diff bis Ende, dann liegt es dazwischen.
Mega
Ich würde sowas nicht Bot nennen. Du kannst ID3 Tags bearbeiten.
Hi,
warum nutzt du nicht TCP. Dafür gibt es doch schon zig laufende Beispiele. Ich habe letztens gerade noch eins gemacht für unsere Praktikantin. ![]()
Mega
Hi,
beu sowas ein.
; Stoppuhr
[/autoit] [autoit][/autoit] [autoit]#include<Date.au3>
Opt('MustDeclareVars', 1)
HotKeySet('{esc}', '_end')
HotKeySet('{Pause}', '_stop')
Global $time = _NowTime()
[/autoit] [autoit][/autoit] [autoit]While 1
ToolTip('Stoppuhr' & @CRLF & '============' & @CRLF & _counter(_NowCalcDate(), $time) & ' left', _
@DesktopWidth - 100, 30)
Sleep(1)
WEnd
Func _stop()
While 1
Sleep(100)
WEnd
EndFunc ;==>_stop
Func _counter($s_Date, $s_time)
Local $returnValue = ''
If Not _DateIsValid($s_Date & ' ' & $s_time) Then Return -1
Local $NumberOfSeconds = _DateDiff('s', $s_Date & ' ' & $s_time, _NowCalc())
Return StringFormat('Days = %.02d' & @CRLF & 'Hours = %.02d' & @CRLF & 'Min = %.02d' & @CRLF & 'Sec = %.02d' & @CRLF & _
'Msec = %.03d', $NumberOfSeconds / 86400, Mod($NumberOfSeconds / 3600, 24), Mod(($NumberOfSeconds / 60), 60), _
Mod($NumberOfSeconds, 60), _MSec())
EndFunc ;==>_counter
Func _MSec()
Local $stSystemTime = DllStructCreate('ushort;ushort;ushort;ushort;ushort;ushort;ushort;ushort')
DllCall('kernel32.dll', 'none', 'GetSystemTime', 'ptr', DllStructGetPtr($stSystemTime))
Local $sMilliSeconds = StringFormat('%03d', DllStructGetData($stSystemTime, 8))
$stSystemTime = 0
Return $sMilliSeconds
EndFunc ;==>_MSec
Func _end()
Exit (0)
EndFunc ;==>_end
P.S.: der Code ist alt, mittlerweile gibt es auch @Msec
Mega
http://www.autoitscript.com/forum/index.php?showtopic=22636
http://www.autoitscript.com/forum/index.php?showtopic=61974
http://www.autoitscript.com/forum/index.php?showtopic=25029
#include <WindowsConstants.au3>
Opt('WinSearchChildren', 1)
Global $SciTECmd = 0
$GUI = GUICreate('test')
; Get SciTE DirectorHandle
$Scite_hwnd = WinGetHandle('DirectorExtension')
GUIRegisterMsg($WM_COPYDATA, 'MY_WM_COPYDATA')
$My_Dec_Hwnd = Dec(StringTrimLeft($GUI, 2))
Global $opt = Opt('WinTitleMatchMode', 4)
SendSciTE_Command($My_Dec_Hwnd, $Scite_hwnd, 'askfilename:')
ConsoleWrite($SciTECmd & @CRLF)
$SciTECmd = StringReplace($SciTECmd, '\\', '\')
; ConsoleWrite($SciTECmd & @CRLF) ; Ausgabe kompletter Rückgabewert von askfilename:
Global $FilePath = StringTrimLeft($SciTECmd, StringInStr($SciTECmd, ':', Default, 3))
;MsgBox(0, '', $FilePath) ; Ausgabe Dateipfad
Global $FileName = StringSplit($SciTECmd, '\\')
;SendSciTE_Command($My_Dec_Hwnd, $Scite_hwnd, 'output:' & $FileName) ; Ausgabe des Dateinamens in die Console
SendSciTE_Command($My_Dec_Hwnd, $Scite_hwnd, 'menucommand:106') ; save
SendSciTE_Command($My_Dec_Hwnd, $Scite_hwnd, 'menucommand:106') ; revert
Opt('WinTitleMatchMode', $opt)
; Open File
Local $h_file = FileOpen($FilePath, 0)
If $h_file = -1 Then
MsgBox(16, 'Error', 'Could not open file : ' & $FilePath, 5)
Exit (0)
EndIf
; Read file
$source = FileRead($h_file)
If @error > 0 Then
MsgBox(16, 'Error', 'Could not read file : ' & $FilePath, 5)
Exit (0)
EndIf
FileClose($h_file)
MsgBox(64, 'Source', $source)
; Send command to SciTE
Func SendSciTE_Command($My_Hwnd, $Scite_hwnd, $sCmd)
$sCmd = ':' & $My_Dec_Hwnd & ':' & $sCmd
;ConsoleWrite('-->' & $sCmd & @LF)
Local $CmdStruct = DllStructCreate('Char[' & StringLen($sCmd) + 1 & ']')
DllStructSetData($CmdStruct, 1, $sCmd)
Local $COPYDATA = DllStructCreate('Ptr;DWord;Ptr')
DllStructSetData($COPYDATA, 1, 1)
DllStructSetData($COPYDATA, 2, StringLen($sCmd) + 1)
DllStructSetData($COPYDATA, 3, DllStructGetPtr($CmdStruct))
DllCall('User32.dll', 'None', 'SendMessage', 'HWnd', $Scite_hwnd, _
'Int', $WM_COPYDATA, 'HWnd', $My_Hwnd, _
'Ptr', DllStructGetPtr($COPYDATA))
EndFunc ;==>SendSciTE_Command
; Received Data from SciTE
Func MY_WM_COPYDATA($hWnd, $msg, $wParam, $lParam)
Local $COPYDATA = DllStructCreate('Ptr;DWord;Ptr', $lParam)
Local $SciTECmdLen = DllStructGetData($COPYDATA, 2)
Local $CmdStruct = DllStructCreate('Char[255]', DllStructGetData($COPYDATA, 3))
$SciTECmd = StringLeft(DllStructGetData($CmdStruct, 1), $SciTECmdLen)
EndFunc ;==>MY_WM_COPYDATA
Hi,
ich bin derzeit dabei das Thema Organize Includes im Eng Forum im versteckten MVP Forum mit Jos & anderen zu besprechen.
Danach werde ich mit der Umsetzung beginnen. Ziel ist es OI schnell zu machen und dann in Scite4Autoit zu integrieren.
Dafür gibt es aber noch einige Details zu klären bevor ich anfangen kann.
Die Umsetzung wird dann sicher auch noch jede Menge Zeit in Ansoruch nehmen.
Was willst du denn noch enbauen, außer das Finden der richtigen includes?
Mega
HI,
ganz klar BETA!
Der Name BETA ist einfach schlecht gewählt. Eigentlich handelt es sich immer um eine Weiterentwicklung der Stabel nur mit der Option mal schnell wieder Änderungen rückgängig zu machen. Das kann aber immer passieren und wenn dann ist sicher auch sinnvoll.
Mega
Nimm mal dies zum Test
#include <INet.au3>
[/autoit] [autoit][/autoit] [autoit]$s_SmtpServer = "mail.gmx.net"
$s_FromName = "xxx"
$s_FromAddress = "xxx@gmx.de"
$s_ToAddress = "XXX"
$s_Subject = "My Test UDF"
$s_UName = "xxx@gmx.de"
$s_PWD = "xxx"
#cs
$arIniRead = IniReadSection(@ScriptDir & '\mails.ini', "mail")
$s_SmtpServer = $arIniRead[1][1]
$s_FromName = $arIniRead[2][1]
$s_FromAddress = $arIniRead[3][1]
$s_ToAddress = $arIniRead[4][1]
$s_Subject = $arIniRead[5][1]
$s_UName = $arIniRead[6][1]
$s_PWD = $arIniRead[7][1]
MsgBox(0, "", $s_SmtpServer & ' ' & $s_FromName & ' ' & $s_FromAddress & ' ' & $s_ToAddress & ' ' & $s_Subject & ' ' & $s_UName & ' ' & $s_PWD)
#ce
Dim $as_Body[2]
$as_Body[0] = "Testing the new email udf"
$as_Body[1] = "Second Line"
$Response = _INetSmtpMailAuth($s_SmtpServer, $s_FromName, $s_FromAddress, $s_ToAddress, $s_UName, $s_PWD, $s_Subject, $as_Body)
;~ $Response = _INetSmtpMail ($s_SmtpServer, $s_FromName, $s_FromAddress, $s_ToAddress, $s_Subject, $as_Body)
$err = @error
If $Response = 1 Then
MsgBox(0, "Success!", "Mail sent")
Else
MsgBox(0, "Error!", "Mail failed with error code " & $err)
EndIf
;===============================================================================
;
; Function Name: _INetSmtpMailAuth()
; Description: Sends an email using SMTP over TCP IP.
; Parameter(s): $s_SmtpServer - SMTP server to be used for sending email
; $s_FromName - Name of sender
; $s_FromAddress - eMail address of sender
; $s_ToAddress - Address that email is to be sent to
; $s_Username - Username for Authentication (bernd670)
; $s_Passwd - Password for Authentication (bernd670)
; $s_Subject - Subject of eMail
; $as_Body - Single dimension array containing the body of eMail as strings
; $s_helo - Helo identifier (default @COMPUTERNAME) sometime needed by smtp server
; $s_first - send before Helo identifier (default @CRLF) sometime needed by smtp server
; $b_trace - trace on a splash window (default 0 = no trace)
; Requirement(s): None
; Return Value(s): On Success - Returns 1
; On Failure - 0 and sets
; @ERROR = 1 - Invalid Parameters
; @ERROR = 2 - Unable to start TCP
; @ERROR = 3 - Unable to resolve IP
; @ERROR = 4 - Unable to create socket
; @ERROR = 5x - Cannot open SMTP session
; @ERROR = 50x - Cannot send body
; @ERROR = 5000 - Cannot close SMTP session
; Authors: Original function to send email via TCP - Asimzameer
; Conversion to UDF - Walkabout
; Correction Helo, timeout, trace - Jpm
; Correction send before Helo - Jpm
; Include Authentication - bernd670
;
;===============================================================================
Func _INetSmtpMailAuth($s_SmtpServer, $s_FromName, $s_FromAddress, $s_ToAddress, $s_Username, $s_Passwd, $s_Subject = "", $as_Body = "", $s_helo = "", $s_first = "-1", $b_trace = 0)
Local $v_Socket
Local $s_IPAddress
Local $i_Count
Local $s_Send[9]
Local $s_ReplyCode[9];Return code from SMTP server indicating success
If $s_SmtpServer = "" Or $s_FromAddress = "" Or $s_ToAddress = "" Or $s_Username = "" Or $s_Passwd = "" Or $s_FromName = "" Or StringLen($s_FromName) > 256 Then
SetError(1)
Return 0
EndIf
If $s_helo = "" Then $s_helo = @ComputerName
If TCPStartup() = 0 Then
SetError(2)
Return 0
EndIf
StringRegExp($s_SmtpServer, "(25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)\.(25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)\.(25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)\.(25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)")
If @extended Then
$s_IPAddress = $s_SmtpServer
Else
$s_IPAddress = TCPNameToIP($s_SmtpServer)
EndIf
If $s_IPAddress = "" Then
TCPShutdown()
SetError(3)
Return 0
EndIf
$v_Socket = TCPConnect($s_IPAddress, 25)
If $v_Socket = -1 Then
TCPShutdown()
SetError(4)
Return (0)
EndIf
$s_Send[0] = "EHLO " & $s_helo & @CRLF
;~ If StringLeft($s_helo,5) <> "EHLO " Then $s_Send[0] = "EHLO " & $s_helo & @CRLF
$s_ReplyCode[0] = "250"
$s_Send[1] = "AUTH LOGIN" & @CRLF
$s_ReplyCode[1] = "334"
$s_Send[2] = _Base64Encoding($s_Username) & @CRLF
$s_ReplyCode[2] = "334"
$s_Send[3] = _Base64Encoding($s_Passwd) & @CRLF
$s_ReplyCode[3] = "235"
$s_Send[4] = "MAIL FROM: <" & $s_FromAddress & ">" & @CRLF
$s_ReplyCode[4] = "250"
$s_Send[5] = "RCPT TO: <" & $s_ToAddress & ">" & @CRLF
$s_ReplyCode[5] = "250"
$s_Send[6] = "DATA" & @CRLF
$s_ReplyCode[6] = "354"
$s_Send[7] = "From: " & $s_FromName & " <" & $s_FromAddress & ">" & @CRLF & _
"To: " & "<" & $s_ToAddress & ">" & @CRLF & _
"Subject: " & $s_Subject & @CRLF & _
"Mime-Version: 1.0" & @CRLF & _
"Content-Type: text/plain; charset=US-ASCII" & @CRLF & _
@CRLF
$s_ReplyCode[7] = ""
$s_Send[8] = @CRLF & "." & @CRLF
$s_ReplyCode[8] = "250"
; open stmp session
If _SmtpSend($v_Socket, $s_Send[0], $s_ReplyCode[0], $b_trace, "220", $s_first) Then
SetError(50)
Return 0
EndIf
; send header
For $i_Count = 0 To UBound($s_Send) - 2
If _SmtpSend($v_Socket, $s_Send[$i_Count], $s_ReplyCode[$i_Count], $b_trace) Then
SetError(50 + $i_Count)
Return 0
EndIf
Next
; send body records (a record can be multiline : take care of a subline beginning with a dot should be ..)
For $i_Count = 0 To UBound($as_Body) - 1
; correct line beginning with a dot
If StringLeft($as_Body[$i_Count], 1) = "." Then $as_Body[$i_Count] = "." & $as_Body[$i_Count]
If _SmtpSend($v_Socket, $as_Body[$i_Count] & @CRLF, "", $b_trace) Then
SetError(500 + $i_Count)
Return 0
EndIf
Next
; close the smtp session
$i_Count = UBound($s_Send) - 1
If _SmtpSend($v_Socket, $s_Send[$i_Count], $s_ReplyCode[$i_Count], $b_trace) Then
SetError(5000)
Return 0
EndIf
TCPCloseSocket($v_Socket)
TCPShutdown()
Return 1
EndFunc ;==>_INetSmtpMailAuth
;===============================================================================
;
; Function Name: _Base64Encoding()
; Description: Kodiert eine Zeichenfolge mit dem Base64-Verfahren
; (http://de.wikipedia.org/wiki/Base64)
; Parameter(s): $String - Zeichenfolge die kodiert werden soll
; Requirement(s): None
; Return Value(s): Kodierte Zeichenfolge
; Authors: bernd670
;
;===============================================================================
Func _Base64Encoding($String)
$strUmsetzung = "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/"
$strRetValue = ""
For $i = 1 To StringLen($String) Step 3
$strTok = StringMid($String, $i, 3)
Switch StringLen($strTok)
Case 3
$iTokVal = (Asc(StringMid($strTok, 1, 1)) * 256 + _
Asc(StringMid($strTok, 2, 1))) * 256 + _
Asc(StringMid($strTok, 3, 1))
$strTokCryt = StringMid($strUmsetzung, (BitAND($iTokVal, 63)) + 1, 1)
$iTokVal = BitShift($iTokVal, 6)
$strTokCryt = StringMid($strUmsetzung, (BitAND($iTokVal, 63)) + 1, 1) & $strTokCryt
$iTokVal = BitShift($iTokVal, 6)
$strTokCryt = StringMid($strUmsetzung, (BitAND($iTokVal, 63)) + 1, 1) & $strTokCryt
$iTokVal = BitShift($iTokVal, 6)
$strTokCryt = StringMid($strUmsetzung, (BitAND($iTokVal, 63)) + 1, 1) & $strTokCryt
$strRetValue &= $strTokCryt
Case 2
$iTokVal = (Asc(StringMid($strTok, 1, 1)) * 256 + _
Asc(StringMid($strTok, 2, 1))) * 256
$iTokVal = BitShift($iTokVal, 6)
$strTokCryt = StringMid($strUmsetzung, (BitAND($iTokVal, 63)) + 1, 1)
$iTokVal = BitShift($iTokVal, 6)
$strTokCryt = StringMid($strUmsetzung, (BitAND($iTokVal, 63)) + 1, 1) & $strTokCryt
$iTokVal = BitShift($iTokVal, 6)
$strTokCryt = StringMid($strUmsetzung, (BitAND($iTokVal, 63)) + 1, 1) & $strTokCryt
$strRetValue &= $strTokCryt & "="
Case 1
$iTokVal = Asc(StringMid($strTok, 1, 1)) * 65536
$iTokVal = BitShift($iTokVal, 12)
$strTokCryt = StringMid($strUmsetzung, (BitAND($iTokVal, 63)) + 1, 1)
$iTokVal = BitShift($iTokVal, 6)
$strTokCryt = StringMid($strUmsetzung, (BitAND($iTokVal, 63)) + 1, 1) & $strTokCryt
$strRetValue &= $strTokCryt & "=="
EndSwitch
Next
Return $strRetValue
EndFunc ;==>_Base64Encoding
Mega
Drück mal in Scite Alt+F6
Hi,
alles kein Problem. Du solltest dir aber zunächst genau überlegen wie der Ablauf sein soll.
1. Dateidownlod
2. spreichern
3. ...
Mega
Sowas?
$permutarray = permute("abc")
$msg = ""
For $n = 1 To $permutarray[0]
$msg &= $permutarray[$n] & @CRLF
Next
ConsoleWrite($msg)
Func rotate($sString, $nRotateLevel)
Local $aStringArray = StringSplit($sString, "")
Local $nStartRotate = $aStringArray[0] - $nRotateLevel + 1
Local $n, $tempchar, $tempstr = "", $retval = ""
For $n = 1 To $nStartRotate - 1
$tempstr &= $aStringArray[$n]
Next
$tempchar = $aStringArray[$nStartRotate]
For $n = $nStartRotate + 1 To $aStringArray[0]
$retval &= $aStringArray[$n]
Next
Return $tempstr & $retval & $tempchar
EndFunc ;==>rotate
Func permute_internal($sString, $nRotateLevel, ByRef $permutations)
Local $n, $str
Dim $arr[$nRotateLevel]
If $nRotateLevel = 2 Then
$permutations &= ":" & rotate($sString, $nRotateLevel)
Return
EndIf
$str = $sString
For $n = 0 To $nRotateLevel - 1
$str = rotate($str, $nRotateLevel)
$arr[$n] = $str
;--- special check, to stop a level beeing printed twice ---
If Not (($n = 0) And (StringLen($sString) > $nRotateLevel)) Then
$permutations &= ":" & $arr[$n]
EndIf
permute_internal($arr[$n], $nRotateLevel - 1, $permutations)
Next
EndFunc ;==>permute_internal
Func permute($sString)
Global $permutations = ""
permute_internal($sString, StringLen($sString), $permutations)
$permutations = StringTrimLeft($permutations, 1)
Return StringSplit($permutations, ":")
EndFunc ;==>permute