Naja nicht gerade die Beste Methode da das X immer wo anders ist.
Beiträge von Sprenger120
-
-
Hm schwere Sache. Versuch mal mit dem Beispiel vlt hat man ja mal Glück.
[autoit]#Include <SendMessage.au3>
[/autoit][autoit][/autoit][autoit][/autoit][autoit]
#include <WindowsConstants.au3>_SendMessage(~~GuiHandle,$WM_CLOSE)
[/autoit]
_SendMessage(~~GuiHandle,$WM_QUIT) -
Wie siehts aus mit Error Codes ?
-
hatte iich gestern abend schon, hatte aber nur die inenglisch

ich weiß das es eine deutsche hilfe gibt, hab die aber noch nicht gehabt *ROFL* -
du hast das prog doch geschrieben also weist du doch wie man buttons erstellt

Wenn man so dumme Fragen stellt bestimmt nicht. -
So funzt jeder Button
Spoiler anzeigen
[autoit]#include <GUIConstantsEx.au3>
[/autoit] [autoit][/autoit] [autoit][/autoit] [autoit][/autoit] [autoit]GUICreate("My GUI Button")
[/autoit] [autoit][/autoit] [autoit];~ Opt("GUICoordMode", 3)
[/autoit] [autoit][/autoit] [autoit]
$Button_1 = GUICtrlCreateButton( 'Beep freqeunz 500' , 20, 80, 200)
$Button_2 = GUICtrlCreateButton( 'Beep freqeunz 1000' , 20, 120, -1)
$Button_3 = GUICtrlCreateButton( 'Beep freqeunz 1500' , 20, 160,-2)
GUISetState()While 1
[/autoit] [autoit][/autoit] [autoit]Switch GUIGetMsg()
[/autoit]
Case $GUI_EVENT_CLOSE
ExitLoop
Case $Button_1
Beep( 500, 1500 )
; ExitLoop
Case $Button_2
Beep( 1000, 1500 )
; ExitLoop
Case $Button_3
Beep( 1500, 1500 )
; ExitLoop
EndSwitch
WEndEs waren alle 3 übereinander
-
Sehr informativ dein Beitrag Andy
. Das macht mir alles ein wenig klarer.Aber meinst su statt Nivdea nicht Nvidia ?
-
-
Ehr nicht so gut geeignet. Zu fehleranfällig.
-
Ziemlich dreist das gleiche Thema zum 3ten mal zu eröffnen.
-
Das gilt dann immer.
-
Spoiler anzeigen
[autoit]$hFile = FileOpen("~~Dateipfad",2);Datei öffnen
[/autoit] [autoit][/autoit] [autoit]#cs
[/autoit] [autoit][/autoit] [autoit]
0 = Read mode (default)
1 = Write mode (append to end of file)
===> 2 = Write mode (erase previous contents)
8 = Create directory structure if it doesn't exist (See Remarks).
#ceFileWrite($hFile,"BlaBla");Hier wird der Dateiinhalt überschrieben
[/autoit] [autoit][/autoit] [autoit][/autoit] [autoit]FileClose($hFile);wieder schließen
[/autoit] -
Schau dir mal
[autoit]GUICtrlSetState(~~ControlID~~,$GUI_FOCUS)
[/autoit]
StringLenan. Mit Stringlen kannst du die länge prüfen und dann mit GUICtrlSetState(~~ControlID~~,$GUI_FOCUS)den Fukus auf das Control setzen
-
AAh danke was für ein Doofer Fehler.

-
Hi,
ich lasse eine Lisview über eine Funktion immer zum Ende Scrollen, nur bei mir geht die Schiebeleiste immer hoch und runter anstatt unten zu bleiben.
Hoffentlich könnt ihr mir helfenSpoiler anzeigen
[autoit]#include <WindowsConstants.au3>
[/autoit] [autoit][/autoit] [autoit][/autoit] [autoit]
#include <GUIListView.au3>$hGui_Chat = GUICreate("Chat", 314, 268, -1, -1)
[/autoit] [autoit][/autoit] [autoit]
$cChat_Send = GUICtrlCreateButton("Senden", 245, 240, 64, 20)
$cChat_List = GUICtrlCreateListView("", 8, 8, 297, 227, BitOR($LVS_NOCOLUMNHEADER, $LVS_REPORT, $WS_HSCROLL))
$cChat_Input = GUICtrlCreateInput("", 8, 240, 233, 21)
_GUICtrlListView_AddColumn($cChat_List, "", 200)For $x = 0 To 13
[/autoit] [autoit][/autoit] [autoit]
GUICtrlCreateListViewItem(Random(), $cChat_List)
NextAdlibRegister("ScrollLV")
[/autoit] [autoit][/autoit] [autoit][/autoit] [autoit]
GUISetState(@SW_SHOW)
While 1
$iMsg = GUIGetMsg()
Switch $iMsg
Case -3
Exit
Case $cChat_Send
;~ $sData = GetLongInf()
$sData = GUICtrlRead($cChat_Input)
If $sData = "" Then ContinueLoop
GUICtrlSetData($cChat_Input, "")
$aArray = StringTrimAfter($sData, 25)
If IsArray($aArray) Then
For $x = 1 To $aArray[0] ;-1
GUICtrlCreateListViewItem($aArray[$x], $cChat_List)
Next
EndIf
EndSwitch
WEndFunc ScrollLV()
[/autoit] [autoit][/autoit] [autoit]
$aLV = _GUICtrlListView_GetItemRect($cChat_List, 0)
If UBound($aLV) = 4 Then _GUICtrlListView_Scroll($cChat_List, 0, _GUICtrlListView_GetItemCount($cChat_List) * $aLV[3] - $aLV[1])
EndFunc ;==>ScrollLVFunc StringTrimAfter($sString, $iCount)
[/autoit] [autoit][/autoit] [autoit]
Local $iSplit = 0
$iCount = Int($iCount)
If $iCount < 0 Then Return -1
If $iCount >= StringLen($sString) Then
Local $aArray[2]
$aArray[0] = 1
$aArray[1] = $sString
Return $aArray
EndIf
$iSplit = Int(StringLen($sString) / $iCount)
Dim $aArray[$iSplit] = [0]For $x = 1 To $iSplit - 1
[/autoit]
$aArray[$x] = StringLeft($sString, $iCount)
$sString = StringTrimLeft($sString, $iCount)
$aArray[0] += 1
Next
Return $aArray
EndFunc ;==>StringTrimAfter -
Wenn die Datei im Scriptodner liegt versuch mal
[autoit]_FileWriteFromArray(@ScriptDir & "\Testneu.txt", $aListe)
[/autoit] -
PS Das Bild wir nicht angezeigt das wäre vllt auch noch ein ding aber erst möchte ich gerne die Zeit und den Start Buttom rein bringen
Du musst auch das Bild auch erst mit InetGet runterladen und dann erstellen.
Spoiler anzeigen
[autoit]#include <GUIConstants.au3>
[/autoit] [autoit][/autoit] [autoit]#Region ### START Koda GUI section ### Form=c:\users\david\desktop\silkroad taxi tool.kxf
[/autoit] [autoit][/autoit] [autoit]
$Form1 = GUICreate("Silkroad Taxi Tool v.0.1 © by C0pyRight ---- Good Luck and Have Fun ----", 538, 330, 239, 166)
GUISetCursor (0)
$Input1 = GUICtrlCreateInput("Name 1", 8, 144, 137, 22)
GUICtrlSetFont(-1, 8, 400, 0, "@Adobe Fan Heiti Std B")
GUICtrlSetBkColor(-1, 0xFF0000)
$Input2 = GUICtrlCreateInput("Name 2", 8, 176, 137, 22)
GUICtrlSetFont(-1, 8, 400, 0, "@Adobe Fan Heiti Std B")
GUICtrlSetBkColor(-1, 0xFF0000)
$Input3 = GUICtrlCreateInput("Name 3", 8, 208, 137, 22)
GUICtrlSetFont(-1, 8, 400, 0, "@Adobe Fan Heiti Std B")
GUICtrlSetBkColor(-1, 0xFF0000)
$Input4 = GUICtrlCreateInput("Name 4", 8, 240, 137, 22)
GUICtrlSetFont(-1, 8, 400, 0, "@Adobe Fan Heiti Std B")
GUICtrlSetBkColor(-1, 0xFF0000)
$Input5 = GUICtrlCreateInput("Name 5", 8, 272, 137, 22)
GUICtrlSetFont(-1, 8, 400, 0, "@Adobe Fan Heiti Std B")
GUICtrlSetBkColor(-1, 0xFF0000)
$Input6 = GUICtrlCreateInput("Name 6", 8, 304, 137, 22)
GUICtrlSetFont(-1, 8, 400, 0, "@Adobe Fan Heiti Std B")
GUICtrlSetBkColor(-1, 0xFF0000)
HttpSetUserAgent("Firefox")
InetGet("http://german-fun-fighters.com/silkroad.jpg",@TempDir & "\_silkroad.jpg")$Pic1 = GUICtrlCreatePic(@TempDir & "\_silkroad.jpg", 0, 0, 537, 329,)
[/autoit] [autoit][/autoit] [autoit]GUISetState(@SW_SHOW)
[/autoit] [autoit][/autoit] [autoit]
#EndRegion ### END Koda GUI section ###While 1
[/autoit] [autoit][/autoit] [autoit]
$nMsg = GUIGetMsg()
Switch $nMsg
Case $GUI_EVENT_CLOSE
ExitCase $Form1
[/autoit]
EndSwitch
WEnd -
Zum Blockinput.
Versuch mal das BlockInputEx UDFSpoiler anzeigen
[autoit]#include-once
[/autoit] [autoit][/autoit] [autoit]
#include <WindowsConstants.au3>
#include <WinAPI.au3>
;#Region ======================== BlockInputEx UDF Info ========================
[/autoit] [autoit][/autoit] [autoit]
; Extended (advanced) function to block mouse & keyboard inputs.
;
; This UDF supports few features that built-in BlockInput() function does not.
; Here is a quick "features list":
;----------------------------------------------------------------------
;* Block seperately mouse or keyboard input.
;* Block specific keyboard/mouse keys/clicks.
; [+] Not only hex keys are supported, string keys (such as {ENTER}) is also valid.
;* Block all keyboard/mouse keys *except* specific keys/events.
;* Block keys by CLASS Name (see UDF documentation).
;* Block inputs only for specific window.
;----------------------------------------------------------------------
;
; AutoIt Version: 3.2.12.1+
; Author: G.Sandler (a.k.a MrCreatoR). Initial idea and hooks example by rasim.
;
;==================
; History version:
;==================
;
; [v1.3 - 24.09.2009, 23:00]
; + Added _BlockInputEx Example (Pass Lock)
; * Fixed few examples.
; * Fixed spell mistakes in the UDF.
;
; [v1.2 - 16.01.2009, 21:00]
; + Added key strings support.
; Now users can set simple hotkey strings for Exclude/Include parameters + Group chars, i.e: "[Group]|{UP}|{DOWN}"
; (See UDF documentation)
; + Added mouse events blocking support to the $sExclude/$sInclude parameters.
; + Added example for mouse events blocking.
;
; [v1.1 - 16.01.2009]
; + Added CLASSes support (see UDF documentation), thanks to FireFox for the idea and the keys lists.
; + Added example for CLASS usage.
; * Changed behaviour of $iBlockMode parameter as following:
;
; 1 - Block All
; <= 0 - UnBlock all
; 2 - Block only mouse
; 3 - Block only keyboard.
;
; * Fixed hard-crash that related to incorrect BlockInput releasing process (only callbacks was released, not the window hooks).
;
; [v1.0 - 15.01.2009]
; First release.
#EndRegion ======================== BlockInputEx UDF Info ========================
;Global $ah_MouseKeyboard_WinHooks[7]
[/autoit] [autoit][/autoit] [autoit]; #FUNCTION# ====================================================================================================================
[/autoit] [autoit][/autoit] [autoit]
; Name...........: _BlockInputEx
; Description ...: Disable/enable the mouse and/or keyboard. Supporting blocking (by include/exclude) of seperate keys.
; Syntax.........: _BlockInputEx( [iBlockMode [, sExclude [, sInclude [, hWindows]]]] )
; Parameters ....: $iBlockMode - Set the block mode.
; 1 - Block All
; <= 0 - UnBlock all
; 2 - Block only mouse
; 3 - Block only keyboard.
; $sExclude - Keys hex/string-list (| delimited) to *exclude* when blocking.
; [*] All keys will be blocked, except the keys in $sExclude list.
; [!] This list supports keys CLASSes,
; key strings as supported in HotKeySet() function,
; and seperate mouse events classes, see "Remarks" for more details.
;
;
;
; $sInclude - Keys hex/string-list (| delimited) to *include* when blocking.
; [*] Only these keys will be blocked, the $sExclude ignored in this case.
; [!] This list supports keys CLASSes,
; key strings as supported in HotKeySet() function,
; and seperate mouse events classes, see "Remarks" for more details.
;
; $hWindows - Window handles list (| delimited) to limit the blocking process (Only for keyboard blocking).
;
; Return values .: Success - 1.
; Failure - 0 and set @error to 1. This can happend only when passing wrong parameters.
;
; Author ........: G.Sandler (a.k.a MrCreatoR), Rasim -> Initial idea and hooks example.
; Thanks to FireFox for other block methods, it gave me a starting point for adding the "keys classes" support.
;
;
; Modified.......: 16.01.2009, 21:03
; Remarks .......: * This UDF includes OnAutoItExit function to release the callback/hooks resources.
;
; * $sExclude and $sInclude parameters supporting keys/mouse classes as hex or as string,
; [!] The hex keys list can be found in _IsPressed documentation section.
; Here is a full list of supported classess/events:
; ======= KeyBoard =======
; [:FUNC:]
; [:ALPHA:]
; [:NUMBER:]
; [:ARROWS:]
; [:SPECIAL:]
; [GROUP_abcd] -> Use raw chars/key strings inside squere brackets.
; {KEY} -> Standard keys support ({F1}, {ENTER} etc.).
;
; ========= Mouse =========
; {MMOVE} -> Mouse move event
; {MPDOWN} -> Mouse Primary Down event
; {MPUP} -> Mouse Primary Up event
; {MSDOWN} -> Mouse Secondary Down event
; {MSUP} -> Mouse Secondary Up event
; {MWDOWN} -> Mouse WHEEL Button Down event
; {MWUP} -> Mouse WHEEL Button Up event
; {MWSCROLL} -> Mouse WHEEL Scroll event
; {MSPDOWN} -> Mouse Special Button Down event
; {MSPUP} -> Mouse Special Button Up event
;
;
; * See also built-in BlockInput() documentation.
;
; Related .......: BlockInput()?
; Link ..........; http://www.autoitscript.com/forum/index.php?s=&showtopic=87735
; Example .......; Yes
; ===============================================================================================================================
Func _BlockInputEx($iBlockMode = -1, $sExclude = "", $sInclude = "", $hWindows = "")
If $iBlockMode < -1 Or $iBlockMode > 3 Then Return SetError(1, 0, 0) ;Only -1 to 3 modes are supported.
If $iBlockMode <= 0 Then Return _BlockInput_UnhookWinHooks_Proc()
Local $pStub_KeyProc = 0, $pStub_MouseProc = 0, $hHook_Keyboard = 0, $hHook_Mouse = 0
Local $hHook_Module = _WinAPI_GetModuleHandle(0)
For $i = 0 To 3
If $ah_MouseKeyboard_WinHooks[$i] > 0 Then
_BlockInput_UnhookWinHooks_Proc()
ExitLoop
EndIf
Next
If $iBlockMode = 1 Or $iBlockMode = 2 Then
$pStub_MouseProc = DllCallbackRegister("_MouseHook_Proc", "int", "int;ptr;ptr")
$hHook_Mouse = _WinAPI_SetWindowsHookEx($WH_MOUSE_LL, DllCallbackGetPtr($pStub_MouseProc), $hHook_Module, 0)
EndIf
If $iBlockMode = 1 Or $iBlockMode = 3 Then
$pStub_KeyProc = DllCallbackRegister("_KeyBoardHook_Proc", "int", "int;ptr;ptr")
$hHook_Keyboard = _WinAPI_SetWindowsHookEx($WH_KEYBOARD_LL, DllCallbackGetPtr($pStub_KeyProc), $hHook_Module, 0)
EndIf
$ah_MouseKeyboard_WinHooks[0] = $pStub_KeyProc
$ah_MouseKeyboard_WinHooks[1] = $pStub_MouseProc
$ah_MouseKeyboard_WinHooks[2] = $hHook_Keyboard
$ah_MouseKeyboard_WinHooks[3] = $hHook_Mouse
$ah_MouseKeyboard_WinHooks[4] = "|" & _Parse_vmCodesList_CLASSes(_Parse_vkCodesList_CLASSes($sInclude)) & "|"
$ah_MouseKeyboard_WinHooks[5] = "|" & _Parse_vmCodesList_CLASSes(_Parse_vkCodesList_CLASSes($sExclude)) & "|"
$ah_MouseKeyboard_WinHooks[6] = "|" & $hWindows & "|"
Return 1
EndFunc;KeyBoard hook processing function
[/autoit] [autoit][/autoit] [autoit]
Func _KeyBoardHook_Proc($nCode, $wParam, $lParam)
If $nCode < 0 Then Return _WinAPI_CallNextHookEx($ah_MouseKeyboard_WinHooks[4], $nCode, $wParam, $lParam)
Local $KBDLLHOOKSTRUCT = DllStructCreate("dword vkCode;dword scanCode;dword flags;dword time;ptr dwExtraInfo", $lParam)
Local $vkCode = "0x" & Hex(DllStructGetData($KBDLLHOOKSTRUCT, "vkCode"), 2)
Local $sInclude = $ah_MouseKeyboard_WinHooks[4]
Local $sExclude = $ah_MouseKeyboard_WinHooks[5]
Local $hWnds = $ah_MouseKeyboard_WinHooks[6]
If $sInclude <> "||" Then ;Include proc
If StringInStr($sInclude, "|" & $vkCode & "|") And _
($hWnds = "||" Or StringInStr($hWnds, "|" & WinGetHandle("[ACTIVE]") & "|")) Then Return 1 ;Block processing!
Else ;Exclude proc
If Not StringInStr($sExclude, "|" & $vkCode & "|") And _
($hWnds = "||" Or StringInStr($hWnds, "|" & WinGetHandle("[ACTIVE]") & "|")) Then Return 1 ;Block processing!
EndIf
_WinAPI_CallNextHookEx($ah_MouseKeyboard_WinHooks[2], $nCode, $wParam, $lParam) ;Continue processing
EndFunc;Mouse hook processing function
[/autoit] [autoit][/autoit] [autoit]
Func _MouseHook_Proc($nCode, $wParam, $lParam)
If $nCode < 0 Then Return _WinAPI_CallNextHookEx($ah_MouseKeyboard_WinHooks[3], $nCode, $wParam, $lParam) ;Continue processing
Local $iMouse_Event = BitAND($wParam, 0xFFFF)
;Add mouse exclude/include actions support...
Local $sInclude = $ah_MouseKeyboard_WinHooks[4]
Local $sExclude = $ah_MouseKeyboard_WinHooks[5]
Local $hWnds = $ah_MouseKeyboard_WinHooks[6]
If $sInclude <> "||" Then ;Include proc
If StringInStr($sInclude, "|" & $iMouse_Event & "|") And _
($hWnds = "||" Or StringInStr($hWnds, "|" & WinGetHandle("[ACTIVE]") & "|")) Then Return 1 ;Block processing!
Else ;Exclude proc
If Not StringInStr($sExclude, "|" & $iMouse_Event & "|") And _
($hWnds = "||" Or StringInStr($hWnds, "|" & WinGetHandle("[ACTIVE]") & "|")) Then Return 1 ;Block processing!
EndIf
Return _WinAPI_CallNextHookEx($ah_MouseKeyboard_WinHooks[3], $nCode, $wParam, $lParam) ;Continue processing
EndFunc;Releases callbacks and Unhook Windows hooks
[/autoit] [autoit][/autoit] [autoit]
Func _BlockInput_UnhookWinHooks_Proc()
;Release KeyBoard callback function
If $ah_MouseKeyboard_WinHooks[0] > 0 Then
DllCallbackFree($ah_MouseKeyboard_WinHooks[0])
$ah_MouseKeyboard_WinHooks[0] = 0
EndIf
;Release Mouse callback function
If $ah_MouseKeyboard_WinHooks[1] > 0 Then
DllCallbackFree($ah_MouseKeyboard_WinHooks[1])
$ah_MouseKeyboard_WinHooks[1] = 0
EndIf
;Release KeyBoard Window hook
If IsPtr($ah_MouseKeyboard_WinHooks[2]) Then
_WinAPI_UnhookWindowsHookEx($ah_MouseKeyboard_WinHooks[2])
$ah_MouseKeyboard_WinHooks[2] = 0
EndIf
;Release Mouse Window hook
If IsPtr($ah_MouseKeyboard_WinHooks[3]) Then
_WinAPI_UnhookWindowsHookEx($ah_MouseKeyboard_WinHooks[3])
$ah_MouseKeyboard_WinHooks[3] = 0
EndIf
Return 1
EndFuncFunc _Parse_vkCodesList_CLASSes($sList)
[/autoit] [autoit][/autoit] [autoit]
$sList = StringRegExpReplace($sList, "(?i)\{(Ctrl|Shift|Alt)\}", "{L$1}|{R$1}") ;Fix for Ctrl/Shift/Alt keys (add L/R to them)
Local $a_vkCode_List = StringSplit($sList, "|")
Local $sRet_Keys = ""
For $i = 1 To $a_vkCode_List[0]
Switch $a_vkCode_List[$i]
Case "[:FUNC:]"
$a_vkCode_List[$i] = "0x70|0x71|0x72|0x73|0x74|0x75|0x76|0x77|0x78|0x79|0x7A|0x7B|0x7C|" & _
"0x7D|0x7E|0x7F|0x80H|0x81H|0x82H|0x83H|0x84H|0x85H|0x86H|0x87H"
Case "[:ALPHA:]"
$a_vkCode_List[$i] = "0x41|0x42|0x43|0x44|0x45|0x46|0x47|0x48|0x49|0x4A|0x4B|0x4C|0x4D|" & _
"0x4E|0x4F|0x50|0x51|0x52|0x53|0x54|0x55|0x56|0x57|0x58|0x59|0x5A"
Case "[:NUMBER:]"
$a_vkCode_List[$i] = "0x30|0x31|0x32|0x33|0x34|0x35|0x36|0x37|0x38|0x39|0x60|0x61|0x62|" & _
"0x63|0x64|0x65|0x66|0x67|0x68|0x69"
Case "[:ARROWS:]"
$a_vkCode_List[$i] = "0x25|0x26|0x27|0x28"
Case "[:SPECIAL:]"
$a_vkCode_List[$i] = "0x08|0x09|0x0C|0x0D|0x10|0x11|0x12|0x13|0x14|0x1B|0x20|0x21|0x22|" & _
"0x23|0x24|0x29|0x2A|0x2B|0x2C|0x2D|0x2E|0x5B|0x5C|0x6A|0x6B|0x6C|" & _
"0x6D|0x6E|0x6F|0x90|0x91|0xA0|0xA1|0xA2|0xA3|0xA4|0xA5|0xBA|0xBB|" & _
"0xBC|0xBD|0xBE|0xBF|0xC0|0xDB|0xDC|0xDD"
Case Else
$a_vkCode_List[$i] = _KeyStr_To_vkCode($a_vkCode_List[$i])
EndSwitch
$sRet_Keys &= $a_vkCode_List[$i] & "|"
Next
Return StringRegExpReplace($sRet_Keys, "\|+$", "")
EndFuncFunc _Parse_vmCodesList_CLASSes($sList)
[/autoit] [autoit][/autoit] [autoit]
Local Const $MOUSE_MOVE_EVENT = 512
Local Const $MOUSE_PRIMARYDOWN_EVENT = 513
Local Const $MOUSE_PRIMARYUP_EVENT = 514
Local Const $MOUSE_SECONDARYDOWN_EVENT = 516
Local Const $MOUSE_SECONDARYUP_EVENT = 517
Local Const $MOUSE_WHEELDOWN_EVENT = 519
Local Const $MOUSE_WHEELUP_EVENT = 520
Local Const $MOUSE_WHEELSCROLL_EVENT = 522
Local Const $MOUSE_SPECIALBUTTONDOWN_EVENT = 523
Local Const $MOUSE_SPECIALBUTTONUP_EVENT = 524
Local $a_vmCode_List = StringSplit($sList, "|")
Local $sRet_Keys = ""
For $i = 1 To $a_vmCode_List[0]
Switch $a_vmCode_List[$i]
Case "{MMOVE}"
$a_vmCode_List[$i] = $MOUSE_MOVE_EVENT
Case "{MPDOWN}"
$a_vmCode_List[$i] = $MOUSE_PRIMARYDOWN_EVENT
Case "{MPUP}"
$a_vmCode_List[$i] = $MOUSE_PRIMARYUP_EVENT
Case "{MSDOWN}"
$a_vmCode_List[$i] = $MOUSE_SECONDARYDOWN_EVENT
Case "{MSUP}"
$a_vmCode_List[$i] = $MOUSE_SECONDARYUP_EVENT
Case "{MWDOWN}"
$a_vmCode_List[$i] = $MOUSE_WHEELDOWN_EVENT
Case "{MWUP}"
$a_vmCode_List[$i] = $MOUSE_WHEELUP_EVENT
Case "{MWSCROLL}"
$a_vmCode_List[$i] = $MOUSE_WHEELSCROLL_EVENT
Case "{MSPDOWN}"
$a_vmCode_List[$i] = $MOUSE_SPECIALBUTTONDOWN_EVENT
Case "{MSPUP}"
$a_vmCode_List[$i] = $MOUSE_SPECIALBUTTONUP_EVENT
EndSwitch
$sRet_Keys &= $a_vmCode_List[$i] & "|"
Next
Return StringRegExpReplace($sRet_Keys, "\|+$", "")
EndFuncFunc _KeyStr_To_vkCode($sKeyStr)
[/autoit] [autoit][/autoit] [autoit]
Local $sRet_Keys = "", $aDelim_Keys[1]
Local $aKeys = StringSplit("{LMouse}|{RMouse}|{}|(MMouse}|{}|{}|{}|{BACKSPACE}|{TAB}|{}|{}|{}|{ENTER}|{}|{}|{SHIFT}|{CTRL}|{ALT}|{PAUSE}|{CAPSLOCK}|{}|{}|{}|{}|{}|{}|{ESC}|{}|{}|{}|{]|{SPACE}|{PGUP}|{PGDN}|{END}|{HOME}|{LEFT}|{UP}|{RIGHT}|{DOWN}|{SELECT}|{PRINTSCREEN}|{}|{PRINTSCREEN}|{INSERT}|{DEL}|{}|0|1|2|3|4|5|6|7|8|9|{}|{}|{}|{}|{}|{}|{}|a|b|c|d|e|f|g|h|i|j|k|l|m|n|o|p|q|r|s|t|u|v|w|x|y|z|{LWIN}|{RWIN}|{APPSKEY}|{}|{SLEEP}|{numpad0}|{numpad1}|{numpad2}|{numpad3}|{numpad4}|{numpad5}|{numpad6}|{numpad7}|{numpad8}|{numpad9}|{NUMPADMULT}|{NUMPADADD}|{}|{NUMPADSUB}|{NUMPADDOT}|{NUMPADDIV}|{F1}|{F2}|{F3}|{F4}|{F5}|{F6}|{F7}|{F8}|{F9}|{F10}|{F11}|{F12}|{F13}|{F14}|{F15}|{F16}|{F17}|{F18}|{F19}|{F20}|{F21}|{F22}|{F23}|{F24}|{}|{}|{}|{}|{}|{}|{}|{}|{NUMLOCK}|{}|{}|{}|{}|{}|{}|{}|{}|{}|{}|{}|{}|{}|{}|{}|{LSHIFT}|{RSHIFT}|{LCTRL}|{RCTRL}|{LALT}|{RALT}|{BROWSER_BACK}|{BROWSER_FORWARD}|{BROWSER_REFRESH}|{BROWSER_STOP}|{BROWSER_SEARCH}|{BROWSER_FAVORITES}|{BROWSER_HOME}|{VOLUME_MUTE}|{VOLUME_DOWN}|{VOLUME_UP}|{MEDIA_NEXT}|{MEDIA_PREV}|{MEDIA_STOP}|{MEDIA_PLAY_PAUSE}|{LAUNCH_MAIL}|{LAUNCH_MEDIA}|{LAUNCH_APP1}|{LAUNCH_APP2}|{}|{}|;|{+}|,|{-}|.|/|`|{}|{}|{}|{}|{}|{}|{}|{}|{}|{}|{}|{}|{}|{}|{}|{}|{}|{}|{}|{}|{}|{}|{}|{}|{}|{}|[|\|]|'", "|")
If StringRegExp($sKeyStr, "\A\[|\]\z") Then
$sKeyStr = StringRegExpReplace($sKeyStr, "\A\[|\]\z", "")
$sKeyStr = StringRegExpReplace($sKeyStr, "(.)", "\1|")
$sKeyStr = StringRegExpReplace($sKeyStr, "\|+$", "")
$aDelim_Keys = StringSplit($sKeyStr, "")
EndIf
For $i = 1 To $aKeys[0]
If $aDelim_Keys[0] > 1 Then
For $j = 1 To $aDelim_Keys[0]
If $aKeys[$i] = $aDelim_Keys[$j] Then $sRet_Keys &= "0x" & Hex($i, 2) & "|"
Next
Else
If $aKeys[$i] = $sKeyStr Then Return "0x" & Hex($i, 2)
EndIf
Next
If $sRet_Keys = "" Then Return $sKeyStr
Return StringRegExpReplace($sRet_Keys, "\|+$", "")
EndFunc;Called when script exits to release resources.
[/autoit]
Func OnAutoItExit()
_BlockInputEx(0)
EndFuncUnd wenn das nicht geht dann versuch mal mit #requireadmin.
-
Hm ja Testen ohne etwas zu Testen zu haben geht schlecht. Du hast den Source vergessen
.Und außerdem kommt das in H&Ü.
-
[autoit]
#include <Misc.au3>
[/autoit][autoit][/autoit][autoit]While Sleep(10)
[/autoit][autoit][/autoit][autoit]If _IsPressed(41) Then
[/autoit]
ConsoleWrite("A gedrückt" & @CRLF)
While _IsPressed(41)
Sleep(10)
WEnd
EndIf
WEndDrück mal a