Gets the gamma ramp on direct color display boards that support downloadable gamma ramps in hardware
#include <WinAPIGdi.au3>
_WinAPI_GetDeviceGammaRamp ( $hDC, ByRef $aRamp )
| $hDC | Handle to a device context of the direct color display board in question. |
| $aRamp | Returns the 2D array ([r1, g1, b1], [r2, g2, b2], ... [r256, g256, b256]) that is created by this function, and where the function place the current gamma ramp of the color display board. Each element in this array is an integer value with a range from 0 to 65535 which is a mapping between RGB values in the frame buffer and digital-analog-converter (DAC) values. (See MSDN for more information) |
| Success: | 1. |
| Failure: | 0. |
Direct color display modes do not use color lookup tables and are usually 16, 24, or 32 bit.
Not all direct color video boards support loadable gamma ramps.
The _WinAPI_GetDeviceGammaRamp() succeeds only for devices with drivers that support downloadable gamma ramps in hardware.
Suche nach GetDeviceGammaRamp in der MSDN Bibliothek.
#include <APIGdiConstants.au3>
#include <Array.au3>
#include <GUIConstantsEx.au3>
#include <MsgBoxConstants.au3>
#include <SendMessage.au3>
#include <StaticConstants.au3>
#include <WinAPIGdi.au3>
#include <WinAPIGdiDC.au3>
#include <WinAPIHObj.au3>
Local $aRamp, $iRgb = 0xFF0000
; Create GUI
Local $hForm = GUICreate('Test ' & StringReplace(@ScriptName, '.au3', '()'), 256, 256)
GUICtrlCreatePic('', 0, 0, 256, 256)
Local $hPic = GUICtrlGetHandle(-1)
; Retrieve current gamma ramp and create graph of lookup table (LUT)
Local $hDC = _WinAPI_GetDC(0)
Local $hMemDC = _WinAPI_CreateCompatibleDC($hDC)
Local $hBitmap = _WinAPI_CreateCompatibleBitmapEx($hDC, 256, 256, 0)
Local $hSv1 = _WinAPI_SelectObject($hMemDC, $hBitmap)
Local $hPen = _WinAPI_GetStockObject($DC_PEN)
Local $hSv2 = _WinAPI_SelectObject($hMemDC, $hPen)
_WinAPI_SetROP2($hMemDC, $R2_XORPEN)
_WinAPI_GetDeviceGammaRamp($hDC, $aRamp)
_WinAPI_ReleaseDC(0, $hDC)
If IsArray($aRamp) Then
For $i = 0 To 2
_WinAPI_SetDCPenColor($hMemDC, BitShift($iRgb, 8 * $i))
For $j = 0 To 255
If $j Then
_WinAPI_LineTo($hMemDC, $j + 1, Round(255 * (1 - $aRamp[$j][$i] / 65280)) - 1)
Else
_WinAPI_MoveTo($hMemDC, 0, Round(255 * (1 - $aRamp[$j][$i] / 65280)))
EndIf
Next
Next
EndIf
_WinAPI_SetDCPenColor($hMemDC, 0x404040)
_WinAPI_SetROP2($hMemDC, $R2_MERGEPEN)
For $i = 64 To 192 Step 64
_WinAPI_DrawLine($hMemDC, $i - 1, 0, $i - 1, 256)
_WinAPI_DrawLine($hMemDC, 0, $i, 256, $i)
Next
_WinAPI_SelectObject($hMemDC, $hSv1)
_WinAPI_SelectObject($hMemDC, $hSv2)
_WinAPI_DeleteObject($hPen)
_WinAPI_DeleteDC($hMemDC)
; Set bitmap to control
_SendMessage($hPic, $STM_SETIMAGE, 0, $hBitmap)
Local $hObj = _SendMessage($hPic, $STM_GETIMAGE)
If $hObj <> $hBitmap Then
_WinAPI_DeleteObject($hBitmap)
EndIf
GUISetState(@SW_SHOW)
If IsArray($aRamp) Then
_ArrayDisplay($aRamp, '_WinAPI_GetDeviceGammaRamp')
Else
MsgBox(($MB_ICONERROR + $MB_SYSTEMMODAL), 'Error', 'Your video board do not support loadable gamma ramps.', 0, $hForm)
EndIf
Do
Until GUIGetMsg() = $GUI_EVENT_CLOSE