Gmx Mail mit autoit geht ned

#include<Inet.au3>
#include<GUIConstantsEx.au3>

#region ### START Koda GUI section ### Form=
$GUI = GUICreate("Email Senden", 407, 119, 193, 125)
GUICtrlCreateGroup("", 8, 0, 393, 113)
GUICtrlCreateLabel("Betreff", 16, 16, 92, 17)
$betreff_I = GUICtrlCreateInput("", 112, 16, 281, 21)
GUICtrlCreateLabel("Text", 16, 48, 92, 17)
$text_I = GUICtrlCreateInput("", 112, 48, 281, 21)
$send_B = GUICtrlCreateButton("&Senden", 112, 80, 283, 25, 0)
GUICtrlCreateLabel("by ...", 16, 88, 92, 17)
GUICtrlCreateGroup("", -99, -99, 1, 1)
GUISetState(@SW_SHOW)
#endregion ### START Koda GUI section ### Form=

; Deine Einstellungen!
$s_SmtpServer = "mail.gmx.net"
$s_FromName = @UserName
$s_FromAddress = "Unbekannt@gmx.de"
$s_ToAddress = "Unbekannt@gmx.de"
$s_Subject = "Meine Testmail"
$s_UName = "Unbekannt@gmx.de"
$s_PWD = "********"

While 1
$nMsg = GUIGetMsg()
Switch $nMsg
Case $GUI_EVENT_CLOSE
Exit
Case $send_B
Dim $as_Body[1]
$as_Body[0] = GUICtrlRead($text_I)
$Response = _INetSmtpMailAuth($s_SmtpServer, $s_FromName, $s_FromAddress, $s_ToAddress, $s_UName, $s_PWD, GUICtrlRead($s_Subject), $as_Body)
$err = @error
If $Response = 1 Then
MsgBox(0, "Success!", "Mail sent")
Else
MsgBox(0, "Error!", "Mail failed with error code " & $err)
EndIf
EndSwitch
WEnd

;===============================================================================
;
; Function Name: _INetSmtpMailAuth()
; Description: Sends an email using SMTP over TCP IP.
; Parameter(s): $s_SmtpServer - SMTP server to be used for sending email
; $s_FromName - Name of sender
; $s_FromAddress - eMail address of sender
; $s_ToAddress - Address that email is to be sent to
; $s_Username - Username for Authentication (bernd670)
; $s_Passwd - Password for Authentication (bernd670)
; $s_Subject - Subject of eMail
; $as_Body - Single dimension array containing the body of eMail as strings
; $s_helo - Helo identifier (default @COMPUTERNAME) sometime needed by smtp server
; $s_first - send before Helo identifier (default @CRLF) sometime needed by smtp server
; $b_trace - trace on a splash window (default 0 = no trace)
; Requirement(s): None
; Return Value(s): On Success - Returns 1
; On Failure - 0 and sets
; @ERROR = 1 - Invalid Parameters
; @ERROR = 2 - Unable to start TCP
; @ERROR = 3 - Unable to resolve IP
; @ERROR = 4 - Unable to create socket
; @ERROR = 5x - Cannot open SMTP session
; @ERROR = 50x - Cannot send body
; @ERROR = 5000 - Cannot close SMTP session
; Authors: Original function to send email via TCP - Asimzameer
; Conversion to UDF - Walkabout
; Correction Helo, timeout, trace - Jpm
; Correction send before Helo - Jpm
; Include Authentication - bernd670
;
;===============================================================================
Func _INetSmtpMailAuth($s_SmtpServer, $s_FromName, $s_FromAddress, $s_ToAddress, $s_Username, $s_Passwd, $s_Subject = "", $as_Body = "", $s_helo = "", $s_first = "-1", $b_trace = 0)

Local $v_Socket
Local $s_IPAddress
Local $i_Count
Local $s_Send[9]
Local $s_ReplyCode[9];Return code from SMTP server indicating success

If $s_SmtpServer = "" Or $s_FromAddress = "" Or $s_ToAddress = "" Or $s_Username = "" Or $s_Passwd = "" Or $s_FromName = "" Or StringLen($s_FromName) > 256 Then
SetError(1)
Return 0
EndIf
If $s_helo = "" Then $s_helo = @ComputerName
If TCPStartup() = 0 Then
SetError(2)
Return 0
EndIf
StringRegExp($s_SmtpServer, "(25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)\.(25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)\.(25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)\.(25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)")
If @extended Then
$s_IPAddress = $s_SmtpServer
Else
$s_IPAddress = TCPNameToIP($s_SmtpServer)
EndIf
If $s_IPAddress = "" Then
TCPShutdown()
SetError(3)
Return 0
EndIf
$v_Socket = TCPConnect($s_IPAddress, 25)
If $v_Socket = -1 Then
TCPShutdown()
SetError(4)
Return (0)
EndIf

$s_Send[0] = "EHLO " & $s_helo & @CRLF
;~ If StringLeft($s_helo,5) <> "EHLO " Then $s_Send[0] = "EHLO " & $s_helo & @CRLF
$s_ReplyCode[0] = "250"

$s_Send[1] = "AUTH LOGIN" & @CRLF
$s_ReplyCode[1] = "334"
$s_Send[2] = _Base64Encoding($s_Username) & @CRLF
$s_ReplyCode[2] = "334"
$s_Send[3] = _Base64Encoding($s_Passwd) & @CRLF
$s_ReplyCode[3] = "235"
$s_Send[4] = "MAIL FROM: <" & $s_FromAddress & ">" & @CRLF
$s_ReplyCode[4] = "250"
$s_Send[5] = "RCPT TO: <" & $s_ToAddress & ">" & @CRLF
$s_ReplyCode[5] = "250"
$s_Send[6] = "DATA" & @CRLF
$s_ReplyCode[6] = "354"

$s_Send[7] = "From: " & $s_FromName & " <" & $s_FromAddress & ">" & @CRLF & _
"To: " & "<" & $s_ToAddress & ">" & @CRLF & _
"Subject: " & $s_Subject & @CRLF & _
"Mime-Version: 1.0" & @CRLF & _
"Content-Type: text/plain; charset=US-ASCII" & @CRLF & _
@CRLF
$s_ReplyCode[7] = ""

$s_Send[8] = @CRLF & "." & @CRLF
$s_ReplyCode[8] = "250"

; open stmp session
If _SmtpSend($v_Socket, $s_Send[0], $s_ReplyCode[0], $b_trace, "220", $s_first) Then
SetError(50)
Return 0
EndIf

; send header
For $i_Count = 0 To UBound($s_Send) - 2
If _SmtpSend($v_Socket, $s_Send[$i_Count], $s_ReplyCode[$i_Count], $b_trace) Then
SetError(50 + $i_Count)
Return 0
EndIf
Next

; send body records (a record can be multiline : take care of a subline beginning with a dot should be ..)
For $i_Count = 0 To UBound($as_Body) - 1
; correct line beginning with a dot
If StringLeft($as_Body[$i_Count], 1) = "." Then $as_Body[$i_Count] = "." & $as_Body[$i_Count]

If _SmtpSend($v_Socket, $as_Body[$i_Count] & @CRLF, "", $b_trace) Then
SetError(500 + $i_Count)
Return 0
EndIf
Next

; close the smtp session
$i_Count = UBound($s_Send) - 1
If _SmtpSend($v_Socket, $s_Send[$i_Count], $s_ReplyCode[$i_Count], $b_trace) Then
SetError(5000)
Return 0
EndIf

TCPCloseSocket($v_Socket)
TCPShutdown()
Return 1
EndFunc ;==>_INetSmtpMailAuth

;===============================================================================
;
; Function Name: _Base64Encoding()
; Description: Kodiert eine Zeichenfolge mit dem Base64-Verfahren
; (http://de.wikipedia.org/wiki/Base64)
; Parameter(s): $String - Zeichenfolge die kodiert werden soll
; Requirement(s): None
; Return Value(s): Kodierte Zeichenfolge
; Authors: bernd670
;
;===============================================================================
Func _Base64Encoding($String)

$strUmsetzung = "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/"
$strRetValue = ""

For $i = 1 To StringLen($String) Step 3
$strTok = StringMid($String, $i, 3)
Switch StringLen($strTok)
Case 3
$iTokVal = (Asc(StringMid($strTok, 1, 1)) * 256 + _
Asc(StringMid($strTok, 2, 1))) * 256 + _
Asc(StringMid($strTok, 3, 1))
$strTokCryt = StringMid($strUmsetzung, (BitAND($iTokVal, 63)) + 1, 1)
$iTokVal = BitShift($iTokVal, 6)
$strTokCryt = StringMid($strUmsetzung, (BitAND($iTokVal, 63)) + 1, 1) & $strTokCryt
$iTokVal = BitShift($iTokVal, 6)
$strTokCryt = StringMid($strUmsetzung, (BitAND($iTokVal, 63)) + 1, 1) & $strTokCryt
$iTokVal = BitShift($iTokVal, 6)
$strTokCryt = StringMid($strUmsetzung, (BitAND($iTokVal, 63)) + 1, 1) & $strTokCryt
$strRetValue &= $strTokCryt

Case 2
$iTokVal = (Asc(StringMid($strTok, 1, 1)) * 256 + _
Asc(StringMid($strTok, 2, 1))) * 256
$iTokVal = BitShift($iTokVal, 6)
$strTokCryt = StringMid($strUmsetzung, (BitAND($iTokVal, 63)) + 1, 1)
$iTokVal = BitShift($iTokVal, 6)
$strTokCryt = StringMid($strUmsetzung, (BitAND($iTokVal, 63)) + 1, 1) & $strTokCryt
$iTokVal = BitShift($iTokVal, 6)
$strTokCryt = StringMid($strUmsetzung, (BitAND($iTokVal, 63)) + 1, 1) & $strTokCryt
$strRetValue &= $strTokCryt & "="

Case 1
$iTokVal = Asc(StringMid($strTok, 1, 1)) * 65536
$iTokVal = BitShift($iTokVal, 12)
$strTokCryt = StringMid($strUmsetzung, (BitAND($iTokVal, 63)) + 1, 1)
$iTokVal = BitShift($iTokVal, 6)
$strTokCryt = StringMid($strUmsetzung, (BitAND($iTokVal, 63)) + 1, 1) & $strTokCryt
$strRetValue &= $strTokCryt & "=="

EndSwitch
Next

Return $strRetValue
EndFunc ;==>_Base64Encoding