durchlaufender Progressbar für mehrere aufeinanderfolgende Befehle

  • Hallo Board,

    wie kann ich einen Progressbar realisieren der durchgehend für mehrere aufeinanderfolgende Kommados ausgeführt wird.

    z.Zt. starte ich die Kommandos einfach nur per ShellExecuteWait (siehe unten), möchte jedoch das zur gesamten Laufzeit ein Progressbar erscheint.
    evtl. noch mit sich änderndem Text je nachdem was gerade ausgeführt wird.

    Wie kann ich anstellen?

    ShellExecuteWait(@SystemDir&"\wpeinit.exe","","","",@SW_HIDE)
    ShellExecuteWait(@SystemDir&"\wpeutil.exe","DisableFirewall","","",@SW_HIDE)
    ShellExecuteWait(@SystemDir&"\wpeutil.exe","InitializeNetwork","","",@SW_HIDE)

  • hmmm meinste sowas halt ohne Progress

    Spoiler anzeigen
    [autoit]

    #AutoIt3Wrapper_Au3Check_Parameters=-d -w 1 -w 2 -w 3 -w 4 -w 5 -w 6
    #include <GUIConstantsEx.au3>
    #include <GuiButton.au3>
    #include <WindowsConstants.au3>

    [/autoit] [autoit][/autoit] [autoit]

    Opt("MustDeclareVars", 1)

    [/autoit] [autoit][/autoit] [autoit]

    Global $btn, $rdo, $chk, $iMemo

    [/autoit] [autoit][/autoit] [autoit]

    ; Note the controlId from these buttons can NOT be read with GuiCtrlRead

    [/autoit] [autoit][/autoit] [autoit]

    _Main()

    [/autoit] [autoit][/autoit] [autoit]

    Func _Main()
    Local $hGUI

    [/autoit] [autoit][/autoit] [autoit]

    $hGUI = GUICreate("Buttons", 400, 400)
    $iMemo = GUICtrlCreateEdit("", 119, 10, 276, 374, $WS_VSCROLL)
    GUICtrlSetFont($iMemo, 9, 400, 0, "Courier New")

    [/autoit] [autoit][/autoit] [autoit]

    $btn = _GUICtrlButton_Create($hGUI, "Button1", 10, 10, 90, 50)

    [/autoit] [autoit][/autoit] [autoit]

    $rdo = _GUICtrlButton_Create($hGUI, "Radio1", 10, 60, 90, 50, $BS_AUTORADIOBUTTON)

    [/autoit] [autoit][/autoit] [autoit]

    $chk = _GUICtrlButton_Create($hGUI, "Check1", 10, 120, 90, 50, $BS_AUTO3STATE)

    [/autoit] [autoit][/autoit] [autoit]

    GUIRegisterMsg($WM_COMMAND, "WM_COMMAND")
    GUIRegisterMsg($WM_NOTIFY, "WM_NOTIFY")

    GUISetState()

    [/autoit] [autoit][/autoit] [autoit]

    MemoWrite("$btn handle: " & $btn)
    MemoWrite("$rdo handle: " & $rdo)
    MemoWrite("$chk handle: " & $chk & @CRLF)

    [/autoit] [autoit][/autoit] [autoit]

    While 1
    Switch GUIGetMsg()
    Case $GUI_EVENT_CLOSE
    ExitLoop
    EndSwitch
    WEnd

    [/autoit] [autoit][/autoit] [autoit]

    Exit

    [/autoit] [autoit][/autoit] [autoit]

    EndFunc ;==>_Main

    [/autoit] [autoit][/autoit] [autoit][/autoit] [autoit]

    ; Write a line to the memo control
    Func MemoWrite($sMessage)
    GUICtrlSetData($iMemo, $sMessage & @CRLF, 1)
    EndFunc ;==>MemoWrite

    [/autoit] [autoit][/autoit] [autoit]

    Func WM_NOTIFY($hWnd, $Msg, $wParam, $lParam)
    #forceref $hWnd, $Msg, $wParam
    Local Const $BCN_HOTITEMCHANGE = -1249
    Local $tNMBHOTITEM = DllStructCreate("hwnd hWndFrom;int IDFrom;int Code;dword dwFlags", $lParam)
    Local $nNotifyCode = DllStructGetData($tNMBHOTITEM, "Code")
    Local $nID = DllStructGetData($tNMBHOTITEM, "IDFrom")
    Local $hCtrl = DllStructGetData($tNMBHOTITEM, "hWndFrom")
    Local $dwFlags = DllStructGetData($tNMBHOTITEM, "dwFlags")
    Local $sText = ""

    Switch $nNotifyCode
    Case $BCN_HOTITEMCHANGE ; Win XP and Above
    If BitAND($dwFlags, 0x10) = 0x10 Then
    $sText = "$BCN_HOTITEMCHANGE - Entering: " & @CRLF

    ElseIf BitAND($dwFlags, 0x20) = 0x20 Then
    $sText = "$BCN_HOTITEMCHANGE - Leaving: " & @CRLF
    EndIf
    MemoWrite($sText & _
    "-----------------------------" & @CRLF & _
    "WM_NOTIFY - Infos:" & @CRLF & _
    "-----------------------------" & @CRLF & _
    "Code" & @TAB & ":" & $nNotifyCode & @CRLF & _
    "CtrlID" & @TAB & ":" & $nID & @CRLF & _
    "CtrlHWnd:" & $hCtrl & @CRLF & _
    _GUICtrlButton_GetText($hCtrl) & @CRLF)
    EndSwitch
    Return $GUI_RUNDEFMSG
    EndFunc ;==>WM_NOTIFY

    [/autoit] [autoit][/autoit] [autoit]

    ; React on a button click
    Func WM_COMMAND($hWnd, $Msg, $wParam, $lParam)
    #forceref $hWnd, $Msg
    Local $nNotifyCode = BitShift($wParam, 16)
    Local $nID = BitAND($wParam, 0x0000FFFF)
    Local $hCtrl = $lParam
    Local $sText = ""

    Switch $hCtrl
    Case $btn, $rdo, $chk
    Switch $nNotifyCode
    Case $BN_CLICKED
    $sText = "$BN_CLICKED" & @CRLF
    Case $BN_PAINT
    $sText = "$BN_PAINT" & @CRLF
    Case $BN_PUSHED, $BN_HILITE
    $sText = "$BN_PUSHED, $BN_HILITE" & @CRLF
    Case $BN_UNPUSHED, $BN_UNHILITE
    $sText = "$BN_UNPUSHED" & @CRLF
    Case $BN_DISABLE
    $sText = "$BN_DISABLE" & @CRLF
    Case $BN_DBLCLK, $BN_DOUBLECLICKED
    $sText = "$BN_DBLCLK, $BN_DOUBLECLICKED" & @CRLF
    Case $BN_SETFOCUS
    $sText = "$BN_SETFOCUS" & @CRLF
    Case $BN_KILLFOCUS
    $sText = "$BN_KILLFOCUS" & @CRLF
    EndSwitch
    MemoWrite($sText & _
    "-----------------------------" & @CRLF & _
    "WM_COMMAND - Infos:" & @CRLF & _
    "-----------------------------" & @CRLF & _
    "Code" & @TAB & ":" & $nNotifyCode & @CRLF & _
    "CtrlID" & @TAB & ":" & $nID & @CRLF & _
    "CtrlHWnd:" & $hCtrl & @CRLF & _
    _GUICtrlButton_GetText($hCtrl) & @CRLF)
    Return 0 ; Only workout clicking on the button
    EndSwitch
    ; Proceed the default Autoit3 internal message commands.
    ; You also can complete let the line out.
    ; !!! But only 'Return' (without any value) will not proceed
    ; the default Autoit3-message in the future !!!
    Return $GUI_RUNDEFMSG
    EndFunc ;==>WM_COMMAND

    [/autoit]


    schaus dir ma an ist aus der hilfe :thumbup: aber slebr blick nich richtig durch :(

    Einmal editiert, zuletzt von FunH@cker (4. August 2009 um 17:25)