Hi,
dann pack doch einen rein. Aber meinst du nicht, dass Googlen jeder kann?
Mega
Hi,
dann pack doch einen rein. Aber meinst du nicht, dass Googlen jeder kann?
Mega
Hi,
irgendwie erinnert mich das an Kanada. Die sagen nämlich im Bezug auf Schulnoten zu tollen Dingen: fucking A! ![]()
Alina you are a fucking A! ![]()
Mega
Hi,
warum der Umweg?
Die Logik ist doch :
Wenn Eintrag in ini dann ...
das ganze dann in einer Schleife für z.B. hier 5 Ordner.
Mega
Hi,
ich denke die Hilfe zuRegExp sollte nur eine Beschreibung der Parameter enthalten und nicht als Lernanleitung. Die Hilfe sollte erklären, wie man in Autoit die Dinge verwenden kann, nicht mehr und nicht weniger. Das Grundverständnis wird dafür vorausgesetzt.
Mega
Hi,
ungetestet ungefähr so:
#include<Inet.au3>
#include<GUIConstantsEx.au3>
#region ### START Koda GUI section ### Form=
$GUI = GUICreate("Email Senden", 407, 119, 193, 125)
GUICtrlCreateGroup("", 8, 0, 393, 113)
GUICtrlCreateLabel("Betreff", 16, 16, 92, 17)
$betreff_I = GUICtrlCreateInput("", 112, 16, 281, 21)
GUICtrlCreateLabel("Text", 16, 48, 92, 17)
$text_I = GUICtrlCreateInput("", 112, 48, 281, 21)
$send_B = GUICtrlCreateButton("&Senden", 112, 80, 283, 25, 0)
GUICtrlCreateLabel("by ...", 16, 88, 92, 17)
GUICtrlCreateGroup("", -99, -99, 1, 1)
GUISetState(@SW_SHOW)
#endregion ### START Koda GUI section ### Form=
; Deine Einstellungen!
$s_SmtpServer = "mail.gmx.net"
$s_FromName = @UserName
$s_FromAddress = "xxx"
$s_ToAddress = "xxx"
$s_Subject = "Meine Testmail"
$s_UName = "xxx"
$s_PWD = "xxx"
While 1
$nMsg = GUIGetMsg()
Switch $nMsg
Case $GUI_EVENT_CLOSE
Exit
Case $send_B
Dim $as_Body[1]
$as_Body[0] = GUICtrlRead($text_I)
$Response = _INetSmtpMailAuth($s_SmtpServer, $s_FromName, $s_FromAddress, $s_ToAddress, $s_UName, $s_PWD, GUICtrlRead($s_Subject), $as_Body)
$err = @error
If $Response = 1 Then
MsgBox(0, "Success!", "Mail sent")
Else
MsgBox(0, "Error!", "Mail failed with error code " & $err)
EndIf
EndSwitch
WEnd
;===============================================================================
;
; Function Name: _INetSmtpMailAuth()
; Description: Sends an email using SMTP over TCP IP.
; Parameter(s): $s_SmtpServer - SMTP server to be used for sending email
; $s_FromName - Name of sender
; $s_FromAddress - eMail address of sender
; $s_ToAddress - Address that email is to be sent to
; $s_Username - Username for Authentication (bernd670)
; $s_Passwd - Password for Authentication (bernd670)
; $s_Subject - Subject of eMail
; $as_Body - Single dimension array containing the body of eMail as strings
; $s_helo - Helo identifier (default @COMPUTERNAME) sometime needed by smtp server
; $s_first - send before Helo identifier (default @CRLF) sometime needed by smtp server
; $b_trace - trace on a splash window (default 0 = no trace)
; Requirement(s): None
; Return Value(s): On Success - Returns 1
; On Failure - 0 and sets
; @ERROR = 1 - Invalid Parameters
; @ERROR = 2 - Unable to start TCP
; @ERROR = 3 - Unable to resolve IP
; @ERROR = 4 - Unable to create socket
; @ERROR = 5x - Cannot open SMTP session
; @ERROR = 50x - Cannot send body
; @ERROR = 5000 - Cannot close SMTP session
; Authors: Original function to send email via TCP - Asimzameer
; Conversion to UDF - Walkabout
; Correction Helo, timeout, trace - Jpm
; Correction send before Helo - Jpm
; Include Authentication - bernd670
;
;===============================================================================
Func _INetSmtpMailAuth($s_SmtpServer, $s_FromName, $s_FromAddress, $s_ToAddress, $s_Username, $s_Passwd, $s_Subject = "", $as_Body = "", $s_helo = "", $s_first = "-1", $b_trace = 0)
Local $v_Socket
Local $s_IPAddress
Local $i_Count
Local $s_Send[9]
Local $s_ReplyCode[9];Return code from SMTP server indicating success
If $s_SmtpServer = "" Or $s_FromAddress = "" Or $s_ToAddress = "" Or $s_Username = "" Or $s_Passwd = "" Or $s_FromName = "" Or StringLen($s_FromName) > 256 Then
SetError(1)
Return 0
EndIf
If $s_helo = "" Then $s_helo = @ComputerName
If TCPStartup() = 0 Then
SetError(2)
Return 0
EndIf
StringRegExp($s_SmtpServer, "(25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)\.(25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)\.(25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)\.(25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)")
If @extended Then
$s_IPAddress = $s_SmtpServer
Else
$s_IPAddress = TCPNameToIP($s_SmtpServer)
EndIf
If $s_IPAddress = "" Then
TCPShutdown()
SetError(3)
Return 0
EndIf
$v_Socket = TCPConnect($s_IPAddress, 25)
If $v_Socket = -1 Then
TCPShutdown()
SetError(4)
Return (0)
EndIf
$s_Send[0] = "EHLO " & $s_helo & @CRLF
;~ If StringLeft($s_helo,5) <> "EHLO " Then $s_Send[0] = "EHLO " & $s_helo & @CRLF
$s_ReplyCode[0] = "250"
$s_Send[1] = "AUTH LOGIN" & @CRLF
$s_ReplyCode[1] = "334"
$s_Send[2] = _Base64Encoding($s_Username) & @CRLF
$s_ReplyCode[2] = "334"
$s_Send[3] = _Base64Encoding($s_Passwd) & @CRLF
$s_ReplyCode[3] = "235"
$s_Send[4] = "MAIL FROM: <" & $s_FromAddress & ">" & @CRLF
$s_ReplyCode[4] = "250"
$s_Send[5] = "RCPT TO: <" & $s_ToAddress & ">" & @CRLF
$s_ReplyCode[5] = "250"
$s_Send[6] = "DATA" & @CRLF
$s_ReplyCode[6] = "354"
$s_Send[7] = "From: " & $s_FromName & " <" & $s_FromAddress & ">" & @CRLF & _
"To: " & "<" & $s_ToAddress & ">" & @CRLF & _
"Subject: " & $s_Subject & @CRLF & _
"Mime-Version: 1.0" & @CRLF & _
"Content-Type: text/plain; charset=US-ASCII" & @CRLF & _
@CRLF
$s_ReplyCode[7] = ""
$s_Send[8] = @CRLF & "." & @CRLF
$s_ReplyCode[8] = "250"
; open stmp session
If _SmtpSend($v_Socket, $s_Send[0], $s_ReplyCode[0], $b_trace, "220", $s_first) Then
SetError(50)
Return 0
EndIf
; send header
For $i_Count = 0 To UBound($s_Send) - 2
If _SmtpSend($v_Socket, $s_Send[$i_Count], $s_ReplyCode[$i_Count], $b_trace) Then
SetError(50 + $i_Count)
Return 0
EndIf
Next
; send body records (a record can be multiline : take care of a subline beginning with a dot should be ..)
For $i_Count = 0 To UBound($as_Body) - 1
; correct line beginning with a dot
If StringLeft($as_Body[$i_Count], 1) = "." Then $as_Body[$i_Count] = "." & $as_Body[$i_Count]
If _SmtpSend($v_Socket, $as_Body[$i_Count] & @CRLF, "", $b_trace) Then
SetError(500 + $i_Count)
Return 0
EndIf
Next
; close the smtp session
$i_Count = UBound($s_Send) - 1
If _SmtpSend($v_Socket, $s_Send[$i_Count], $s_ReplyCode[$i_Count], $b_trace) Then
SetError(5000)
Return 0
EndIf
TCPCloseSocket($v_Socket)
TCPShutdown()
Return 1
EndFunc ;==>_INetSmtpMailAuth
;===============================================================================
;
; Function Name: _Base64Encoding()
; Description: Kodiert eine Zeichenfolge mit dem Base64-Verfahren
; (http://de.wikipedia.org/wiki/Base64)
; Parameter(s): $String - Zeichenfolge die kodiert werden soll
; Requirement(s): None
; Return Value(s): Kodierte Zeichenfolge
; Authors: bernd670
;
;===============================================================================
Func _Base64Encoding($String)
$strUmsetzung = "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/"
$strRetValue = ""
For $i = 1 To StringLen($String) Step 3
$strTok = StringMid($String, $i, 3)
Switch StringLen($strTok)
Case 3
$iTokVal = (Asc(StringMid($strTok, 1, 1)) * 256 + _
Asc(StringMid($strTok, 2, 1))) * 256 + _
Asc(StringMid($strTok, 3, 1))
$strTokCryt = StringMid($strUmsetzung, (BitAND($iTokVal, 63)) + 1, 1)
$iTokVal = BitShift($iTokVal, 6)
$strTokCryt = StringMid($strUmsetzung, (BitAND($iTokVal, 63)) + 1, 1) & $strTokCryt
$iTokVal = BitShift($iTokVal, 6)
$strTokCryt = StringMid($strUmsetzung, (BitAND($iTokVal, 63)) + 1, 1) & $strTokCryt
$iTokVal = BitShift($iTokVal, 6)
$strTokCryt = StringMid($strUmsetzung, (BitAND($iTokVal, 63)) + 1, 1) & $strTokCryt
$strRetValue &= $strTokCryt
Case 2
$iTokVal = (Asc(StringMid($strTok, 1, 1)) * 256 + _
Asc(StringMid($strTok, 2, 1))) * 256
$iTokVal = BitShift($iTokVal, 6)
$strTokCryt = StringMid($strUmsetzung, (BitAND($iTokVal, 63)) + 1, 1)
$iTokVal = BitShift($iTokVal, 6)
$strTokCryt = StringMid($strUmsetzung, (BitAND($iTokVal, 63)) + 1, 1) & $strTokCryt
$iTokVal = BitShift($iTokVal, 6)
$strTokCryt = StringMid($strUmsetzung, (BitAND($iTokVal, 63)) + 1, 1) & $strTokCryt
$strRetValue &= $strTokCryt & "="
Case 1
$iTokVal = Asc(StringMid($strTok, 1, 1)) * 65536
$iTokVal = BitShift($iTokVal, 12)
$strTokCryt = StringMid($strUmsetzung, (BitAND($iTokVal, 63)) + 1, 1)
$iTokVal = BitShift($iTokVal, 6)
$strTokCryt = StringMid($strUmsetzung, (BitAND($iTokVal, 63)) + 1, 1) & $strTokCryt
$strRetValue &= $strTokCryt & "=="
EndSwitch
Next
Return $strRetValue
EndFunc ;==>_Base64Encoding
Mega
Hi,
dann bau dir deine eigene GUI. In der While schleife prüfst du dann bis der Button gedrückt wurde. Wenn ja dann liest du die Inputboxen mit GuiCtrlRead aus und rufst die Emailsendefunktion auf.
Mega
Hi,
was liefert WinList() ? Was sagt das Autoit Window Info Tool bei den Childwindows?
Mega
Hi,
welche Anwendung? Welche Problem? Was hast du probiert?
Mega
Hi,
ich habe gesagt vorstellen! Nicht das ich 5000 € unnütz verprassen würde!
Ich liebe fertige Technik. Sprich ich will nichts basteln oder zusammenbauen. Einfach kaufen und coooool und funktioniert. ![]()
Es muss auch nicht teuer sein, hauptsache witzig.
Mega
Hi,
die erste Datei mit Fileopen 1 öffnen und dann die zweite auch FileRead anstatt FileReadLine und dann mal gucken.
Mega
Hi,
probier mal :
#include <IE.au3>
Global $win = _IE_window()
ConsoleWrite('!' & $win & @CRLF)
If $win Then
$oIE = _IEAttach($win, 'Title')
ConsoleWrite(@error & @CRLF)
MsgBox(0, "The URL", _IEPropertyGet($oIE, "locationurl"))
EndIf
Func _IE_window()
If Not ProcessExists('iexplore.exe') Then Return 0 ; wenn kein IE Prozess läuft gib 0 zurück
Local $titles_A = WinList() ; Fenstertitelarray
For $i = 0 To UBound($titles_A) - 1
If StringInStr($titles_A[$i][0], 'Internet Explorer') Then ; Beim Durchlauf der Fenster gucken ob in einem Internet Explorer steht wenn ja ...
Return StringStripWS(StringLeft($titles_A[$i][0], StringInStr($titles_A[$i][0], ' ')),
; Von vorne bis zum ersten Leerzeichen zurückgeben
EndIf
Next
Return 0
EndFunc ;==>_IE_window
Mega
Genau! Stellt euch einfach vor ihr hättet 5000 € die ihr verprassen dürft.
Mega
Hi,
so müsste auch immer das Ende angezeigt werden
_GUICtrlListBox_SetTopIndex($hListBox, _GUICtrlListBox_GetCount($hListBox) - 1)
Mega
Hi,
guck dir einfach das Bsp aus der Hilfe zu HotKeySet an.
Mega
Hi,
genauso nur das du dir Klammern maskieren musst mit \(
Mega
Na dann! Viel Spaß damit. Das ? bewirkt das der Regex nicht gierig ist.
Mega
Hi,
[autoit]#include<Array.au3>
Global $re = StringRegExp(FileRead(FileOpen(@ScriptDir & "\inseln.txt", 0)), '&open=karte_kolonie&id=(.*?)">', 3)
_ArrayDisplay($re)
Mega
Hi,
das solltest du hinbekommen.
Mega