E-Mail error code "4"

vassilis

Spoiler anzeigen

[autoit]

#include <INet.au3>

[/autoit] [autoit][/autoit] [autoit]

$s_SmtpServer = "pop3.live.com"
$s_FromName = "Vassilis"
$s_FromAddress = "zivilist_x@hotmail.de"
$s_ToAddress = "cj-bozz@hotmail.com"
$s_Subject = "TEST :D"
Dim $as_Body[2]
$as_Body[0] = "Die neue E-Mail UDF wird getestet"
$as_Body[1] = "Zweite Zeile"
$Response = _INetSmtpMail($s_SmtpServer, $s_FromName, $s_FromAddress, $s_ToAddress, $s_Subject, $as_Body)
$err = @error
If $Response = 1 Then
MsgBox(0, "Erfolg!", "Die E-Mail wurde versandt")
Else
MsgBox(0, "Fehler!", "Das versenden der E-Mail schlug fehl. Fehlercode: " & $err)
EndIf

[/autoit]

wie ihr an meinem script sehen könnt will ich testen eine e-mail zu senden auf mein hotmail account!
leider kommt bei mir die fehler meldung "4"
was soviel heisst wie:
4 - Kann keinen Socket erstellen
....woran liegt dieses problem was sollte ich besser machen?

Danke an alle die mir helfen
!
mfg!

**Sprenger120**

Nimm diese Mail funktion die is besser

Spoiler anzeigen

[autoit]

; Script Start - Add your code below here
;
;##################################
; Include
;##################################
#include<file.au3>
;##################################
; Variables
;##################################
$SmtpServer = "" ; address for the smtp-server to use - REQUIRED
$FromName = "" ; name from who the email was sent
$FromAddress = "" ; address from where the mail should come
$ToAddress = "" ; destination address of the email - REQUIRED
$Subject = "" ; subject from the email - can be anything you want it to be
$Body = "" ; the messagebody from the mail - can be left blank but then you get a blank mail
$AttachFiles = "" ; the file you want to attach- leave blank if not needed
$CcAddress = "" ; address for cc - leave blank if not needed
$BccAddress = "" ; address for bcc - leave blank if not needed
$Importance = "" ; Send message priority: "High", "Normal", "Low"
$Username = "" ; username for the account used from where the mail gets sent - REQUIRED
$Password = "" ; password for the account used from where the mail gets sent - REQUIRED
$IPPort = 25 ; port used for sending the mail
$ssl = 0 ; enables/disables secure socket layer sending - put to 1 if using httpS
;~ $IPPort=465 ; GMAIL port used for sending the mail
;~ $ssl=1 ; GMAILenables/disables secure socket layer sending - put to 1 if using httpS

[/autoit] [autoit][/autoit] [autoit]

;##################################
; Script
;##################################
Global $x = 0
Global $oMyRet[2]
Global $oMyError = ObjEvent("AutoIt.Error", "MyErrFunc")

[/autoit] [autoit][/autoit] [autoit][/autoit] [autoit]

$x += 1
$rc = _INetSmtpMailCom($SmtpServer, $FromName, $FromAddress, $ToAddress, $Subject, $Body, $AttachFiles, $CcAddress, $BccAddress, $Importance, $Username, $Password, $IPPort, $ssl)

[/autoit] [autoit][/autoit] [autoit]

TrayTip("SpamMsg", "Nummer:" & $x, 12)
If @error Then
MsgBox(0, "Error sending message", "Error code:" & @error & " Description:" & $rc)
Exit
EndIf

[/autoit] [autoit][/autoit] [autoit]

;
; The UDF
Func _INetSmtpMailCom($s_SmtpServer, $s_FromName, $s_FromAddress, $s_ToAddress, $s_Subject = "", $as_Body = "", $s_AttachFiles = "", $s_CcAddress = "", $s_BccAddress = "", $s_Importance = "Normal", $s_Username = "", $s_Password = "", $IPPort = 25, $ssl = 0)
Local $objEmail = ObjCreate("CDO.Message")
$objEmail.From = '"' & $s_FromName & '" <' & $s_FromAddress & '>'
$objEmail.To = $s_ToAddress
Local $i_Error = 0
Local $i_Error_desciption = ""
If $s_CcAddress <> "" Then $objEmail.Cc = $s_CcAddress
If $s_BccAddress <> "" Then $objEmail.Bcc = $s_BccAddress
$objEmail.Subject = $s_Subject
If StringInStr($as_Body, "<") And StringInStr($as_Body, ">") Then
$objEmail.HTMLBody = $as_Body
Else
$objEmail.Textbody = $as_Body & @CRLF
EndIf
If $s_AttachFiles <> "" Then
Local $S_Files2Attach = StringSplit($s_AttachFiles, ";")
For $x = 1 To $S_Files2Attach[0]
$S_Files2Attach[$x] = _PathFull($S_Files2Attach[$x])
ConsoleWrite('@@ Debug(62) : $S_Files2Attach = ' & $S_Files2Attach & @LF & '>Error code: ' & @error & @LF) ;### Debug Console
If FileExists($S_Files2Attach[$x]) Then
$objEmail.AddAttachment($S_Files2Attach[$x])
Else
ConsoleWrite('!> File not found to attach: ' & $S_Files2Attach[$x] & @LF)
SetError(1)
Return 0
EndIf
Next
EndIf
$objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/sendusing") = 2
$objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/smtpserver") = $s_SmtpServer
If Number($IPPort) = 0 Then $IPPort = 25
$objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/smtpserverport") = $IPPort
;Authenticated SMTP
If $s_Username <> "" Then
$objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/smtpauthenticate") = 1
$objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/sendusername") = $s_Username
$objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/sendpassword") = $s_Password
EndIf
If $ssl Then
$objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/smtpusessl") = True
EndIf
;Update settings
$objEmail.Configuration.Fields.Update
; Set Email Importance
Switch $s_Importance
Case "High"
$objEmail.Fields.Item("urn:schemas:mailheader:Importance") = "High"
Case "Normal"
$objEmail.Fields.Item("urn:schemas:mailheader:Importance") = "Normal"
Case "Low"
$objEmail.Fields.Item("urn:schemas:mailheader:Importance") = "Low"
EndSwitch
$objEmail.Fields.Update
; Sent the Message
$objEmail.Send
If @error Then
SetError(2)
Return $oMyRet[1]
EndIf
$objEmail = ""
EndFunc ;==>_INetSmtpMailCom
;
;
; Com Error Handler
Func MyErrFunc()
$HexNumber = Hex($oMyError.number,
$oMyRet[0] = $HexNumber
$oMyRet[1] = StringStripWS($oMyError.description, 3)
ConsoleWrite("### COM Error ! Number: " & $HexNumber & " ScriptLine: " & $oMyError.scriptline & " Description:" & $oMyRet[1] & @LF)
SetError(1); something to check for when this function returns
Return
EndFunc ;==>MyErrFunc

[/autoit]

vassilis

cool!
Danke ..Vielen Dank!
also mich muss nur die variablen ganz oben ändern stimmts?

**Sprenger120**

Überall wo Required steht musst du was einsetzen

vassilis

Danke funktioniert trozdem nicht

**Sprenger120**

Gib mal aktuellen script...bitte das kennwort und bei deiner email addresse das vor dem @ wegnehmen den rest lassen

vassilis

Spoiler anzeigen

[autoit]

; Script Start - Add your code below here
;
;##################################
; Include
;##################################
#include<file.au3>
;##################################
; Variables
;##################################
$SmtpServer = "pop3.live.com" ; address for the smtp-server to use - REQUIRED
$FromName = "vassilis" ; name from who the email was sent
$FromAddress = "zivilist_x@hotmail.de" ; address from where the mail should come
$ToAddress = "@hotmail.com" ; destination address of the email - REQUIRED
$Subject = "hey :D" ; subject from the email - can be anything you want it to be
$Body = "hahaha :D" ; the messagebody from the mail - can be left blank but then you get a blank mail
$AttachFiles = "" ; the file you want to attach- leave blank if not needed
$CcAddress = "" ; address for cc - leave blank if not needed
$BccAddress = "" ; address for bcc - leave blank if not needed
$Importance = "High" ; Send message priority: "High", "Normal", "Low"
$Username = "@hotmail.de" ; username for the account used from where the mail gets sent - REQUIRED
$Password = "zensiert :D" ; password for the account used from where the mail gets sent - REQUIRED
$IPPort = 25 ; port used for sending the mail
$ssl = 0 ; enables/disables secure socket layer sending - put to 1 if using httpS
;~ $IPPort=465 ; GMAIL port used for sending the mail
;~ $ssl=1 ; GMAILenables/disables secure socket layer sending - put to 1 if using httpS

[/autoit] [autoit][/autoit] [autoit]

;##################################
; Script
;##################################
Global $x = 0
Global $oMyRet[2]
Global $oMyError = ObjEvent("AutoIt.Error", "MyErrFunc")

[/autoit] [autoit][/autoit] [autoit][/autoit] [autoit]

$x += 1
$rc = _INetSmtpMailCom($SmtpServer, $FromName, $FromAddress, $ToAddress, $Subject, $Body, $AttachFiles, $CcAddress, $BccAddress, $Importance, $Username, $Password, $IPPort, $ssl)

[/autoit] [autoit][/autoit] [autoit]

TrayTip("SpamMsg", "Nummer:" & $x, 12)
If @error Then
MsgBox(0, "Error sending message", "Error code:" & @error & " Description:" & $rc)
Exit
EndIf

[/autoit] [autoit][/autoit] [autoit]

;
; The UDF
Func _INetSmtpMailCom($s_SmtpServer, $s_FromName, $s_FromAddress, $s_ToAddress, $s_Subject = "", $as_Body = "", $s_AttachFiles = "", $s_CcAddress = "", $s_BccAddress = "", $s_Importance = "Normal", $s_Username = "", $s_Password = "", $IPPort = 25, $ssl = 0)
Local $objEmail = ObjCreate("CDO.Message")
$objEmail.From = '"' & $s_FromName & '" <' & $s_FromAddress & '>'
$objEmail.To = $s_ToAddress
Local $i_Error = 0
Local $i_Error_desciption = ""
If $s_CcAddress <> "" Then $objEmail.Cc = $s_CcAddress
If $s_BccAddress <> "" Then $objEmail.Bcc = $s_BccAddress
$objEmail.Subject = $s_Subject
If StringInStr($as_Body, "<") And StringInStr($as_Body, ">") Then
$objEmail.HTMLBody = $as_Body
Else
$objEmail.Textbody = $as_Body & @CRLF
EndIf
If $s_AttachFiles <> "" Then
Local $S_Files2Attach = StringSplit($s_AttachFiles, ";")
For $x = 1 To $S_Files2Attach[0]
$S_Files2Attach[$x] = _PathFull($S_Files2Attach[$x])
ConsoleWrite('@@ Debug(62) : $S_Files2Attach = ' & $S_Files2Attach & @LF & '>Error code: ' & @error & @LF) ;### Debug Console
If FileExists($S_Files2Attach[$x]) Then
$objEmail.AddAttachment($S_Files2Attach[$x])
Else
ConsoleWrite('!> File not found to attach: ' & $S_Files2Attach[$x] & @LF)
SetError(1)
Return 0
EndIf
Next
EndIf
$objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/sendusing") = 2
$objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/smtpserver") = $s_SmtpServer
If Number($IPPort) = 0 Then $IPPort = 25
$objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/smtpserverport") = $IPPort
;Authenticated SMTP
If $s_Username <> "" Then
$objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/smtpauthenticate") = 1
$objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/sendusername") = $s_Username
$objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/sendpassword") = $s_Password
EndIf
If $ssl Then
$objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/smtpusessl") = True
EndIf
;Update settings
$objEmail.Configuration.Fields.Update
; Set Email Importance
Switch $s_Importance
Case "High"
$objEmail.Fields.Item("urn:schemas:mailheader:Importance") = "High"
Case "Normal"
$objEmail.Fields.Item("urn:schemas:mailheader:Importance") = "Normal"
Case "Low"
$objEmail.Fields.Item("urn:schemas:mailheader:Importance") = "Low"
EndSwitch
$objEmail.Fields.Update
; Sent the Message
$objEmail.Send
If @error Then
SetError(2)
Return $oMyRet[1]
EndIf
$objEmail = ""
EndFunc ;==>_INetSmtpMailCom
;
;
; Com Error Handler
Func MyErrFunc()
$HexNumber = Hex($oMyError.number,
$oMyRet[0] = $HexNumber
$oMyRet[1] = StringStripWS($oMyError.description, 3)
ConsoleWrite("### COM Error ! Number: " & $HexNumber & " ScriptLine: " & $oMyError.scriptline & " Description:" & $oMyRet[1] & @LF)
SetError(1); something to check for when this function returns
Return
EndFunc ;==>MyErrFunc

[/autoit]

**Sprenger120**

$FromAddress und $Username müssten gleich sein probier mal

vassilis

nein klappt nicht ..spam mail auch gecheckt

**autoBert**

Hallo hier ein Skript, das funktioniert:

Spoiler anzeigen

[autoit]

Global $oMyRet[2]
Global $oMyError = ObjEvent("AutoIt.Error", "MyErrFunc")

[/autoit] [autoit][/autoit] [autoit]

;#include <_pop3.au3>
#include "_INetSmtpMailCom.au3"

[/autoit] [autoit][/autoit] [autoit]

;##################################
; Variables
;##################################
$SmtpServer = "smtp.live.com" ; address for the smtp-server to use - REQUIRED
$FromName = "MyName" ; name from who the email was sent
$FromAddress = "MyName@hotmail.de" ; address from where the mail should come
$ToAddress = "YourName@web.de" ; destination address of the email - REQUIRED
$Subject = "Userinfo" ; subject from the email - can be anything you want it to be
$Body = "Test" ; the messagebody from the mail - can be left blank but then you get a blank mail
$AttachFiles = "" ; the file you want to attach- leave blank if not needed
$CcAddress = "" ; address for cc - leave blank if not needed
$BccAddress = "" ; address for bcc - leave blank if not needed
$Importance = "Normal" ; Send message priority: "High", "Normal", "Low"
$Username = "MyName@hotmail.de" ; username for the account used from where the mail gets sent - REQUIRED
$Password = "********" ; password for the account used from where the mail gets sent - REQUIRED
$IPPort = 25 ; port used for sending the mail normaly 25
$ssl = 1 ; enables/disables secure socket layer sending - put to 1 if using httpS
;~ $IPPort=465 ; GMAIL port used for sending the mail
;~ $ssl=1 ; GMAILenables/disables secure socket layer sending - put to 1 if using httpS

[/autoit] [autoit][/autoit] [autoit]

;##################################
; Script
;##################################
;_pop3Connect("pop3.live.com", $Username, $Password) ;wird nicht benötigt
$rc = _INetSmtpMailCom($SmtpServer, $FromName, $FromAddress, $ToAddress, $Subject, $Body, $AttachFiles, $CcAddress, $BccAddress, $Importance, $Username, $Password, $IPPort, $ssl)
If @error Then
MsgBox(0, "Error sending message", "Error code:" & @error & " Description:" & $rc)
EndIf

[/autoit]

PS.: falls deine EMailadresse in Post #1 echt ist hast du Mail

mfg (Auto)Bert